Literature DB >> 2664137

Comparison of the marginal fit of various ceramic crown systems.

M F Abbate1, A H Tjan, W M Fox.   

Abstract

This study evaluated the marginal fit of four ceramic crown systems, (1) metal ceramic crowns with a metal margin, (2) metal ceramic crowns with a porcelain facial margin, (3) Cerestore crowns, and (4) Dicor crowns. Measurements of the marginal adaptation were recorded from the facial and lingual margins by using a video-enhanced microscope with digital micrometer and image intensification in a high resolution television screen. Results indicate that all four crown systems yielded comparable and acceptable marginal fit.

Entities:  

Mesh：

Substances：

Year:  1989        PMID： 2664137     DOI： 10.1016/0022-3913(89)90270-9

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  10 in total

1.  Effect of Resin Bonded Luting Agents Influencing Marginal Discrepancy in All Ceramic Complete Veneer Crowns.

Authors:  Dhanraj Ganapathy; Anusha Sathyamoorthy; Hemalatha Ranganathan; Karthikeyan Murthykumar
Journal:  J Clin Diagn Res       Date:  2016-12-01

2.  Dental Wings CAD/CAM system precision: an internal and marginal fit sperimental analisys.

Authors:  G Sannino; F Gloria; R Schiavetti; L Ottria; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2010-04-20

3.  Aesthetic and functionality in fixed prosthodontic: sperimental and clinical analysis of the CAD-CAM systematic 3Shape.

Authors:  G DE Vico; L Ottria; P Bollero; M Bonino; M Cialone; A Barlattani; M Gargari
Journal:  Oral Implantol (Rome)       Date:  2009-04-20

4.  A comparative study of the effect of four consecutive firing cycles on the marginal fit of all: ceramic crown system and metal ceramic crown system.

Authors:  Ganesh B Bajaj
Journal:  J Indian Prosthodont Soc       Date:  2012-09-28

5.  Fracture resistance of porcelain veneered zirconia crowns with exposed lingual zirconia for anterior teeth after thermal cycling: An in vitro study.

Authors:  Fatemeh A Amir Rad; Faysal G Succaria; Steven M Morgano
Journal:  Saudi Dent J       Date:  2015-01-30

6.  Comparative study on the tensile bond strength and marginal fit of complete veneer cast metal crowns using various luting agents: An in vitro study.

Authors:  B Devi Parameswari; M Rajakumar; G Lambodaran; Shyam Sundar
Journal:  J Pharm Bioallied Sci       Date:  2016-10

7.  Comparative evaluation of dimensional stability of impression materials from developing countries and developed countries after disinfection with different immersion disinfectant systems and ultraviolet chamber.

Authors:  Rupandeep Kaur Samra; Shreenivas Vasant Bhide
Journal:  Saudi Dent J       Date:  2017-12-13

8.  Management of short clinical crowns by utilizing horizontal groove retentive technique in crown/tooth or both with different luting cements - An analysis on extracted teeth.

Authors:  J Haritha; M Reddi Narasimha Rao; B Indira Padmaja; N Raja Reddy; N Suresh Babu; K V Guru Charan Karthik
Journal:  J Family Med Prim Care       Date:  2020-03-26

9.  Marginal Discrepancy of Cast Copings to Abutments with Three Different Luting Agents.

Authors:  José Rosas; Frank Mayta-Tovalino; Maria Eugenia Guerrero; Pedro Luis Tinedo-López; Claudia Delgado; Vanessa Z Ccahuana-Vasquez
Journal:  Int J Dent       Date:  2019-09-02

10.  Marginal fit of anterior 3-unit fixed partial zirconia restorations using different CAD/CAM systems.

Authors:  Tae-Jin Song; Taek-Ka Kwon; Jae-Ho Yang; Jung-Suk Han; Jai-Bong Lee; Sung-Hun Kim; In-Sung Yeo
Journal:  J Adv Prosthodont       Date:  2013-08-31       Impact factor: 1.904
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.