Tomoyuki Takigawa1, Masato Tanaka2, Takuya Morita2, Yoshihisa Sugimoto2, Ozaki Toshifumi2. 1. Department of Orthopaedic Surgery, Okayama University Hospital, 2-5-1 Shikata-cho, Kita-ku, Okayama City, Okayama, 700-8558, Japan. takigawa2004@yahoo.co.jp. 2. Department of Orthopaedic Surgery, Okayama University Hospital, 2-5-1 Shikata-cho, Kita-ku, Okayama City, Okayama, 700-8558, Japan.
Abstract
PURPOSE: Although a C2 pedicle screw and a C1-2 transarticular screw are the most rigid anchors, these screws cannot be used in cases with bilateral high-riding vertebral arteries. The authors describe their recent experience using a novel method of C2-3 transuncovertebral joint screw placement for occipitocervical fixation. METHODS: A 67-year-old patient suffered myelopathy due to instability at C1-2. The patient had bilateral high-riding vertebral arteries that precluded the use of a C2 pedicle screw or a C1-2 transarticular screw. RESULTS: A C2-3 transuncovertebral joint screw was applied bilaterally under 3D navigation guidance. The patient's postoperative course was uneventful, and his neurological status improved after the surgery. Bony fusion was achieved after the surgery. CONCLUSIONS: This is the first report to describe the technique of transuncovertebral joint screw. Using a C2-3 transuncovertebral joint screw, a long screw could be used, and it provided an anchor at C3 and C2 from a posterior approach.
PURPOSE: Although a C2 pedicle screw and a C1-2 transarticular screw are the most rigid anchors, these screws cannot be used in cases with bilateral high-riding vertebral arteries. The authors describe their recent experience using a novel method of C2-3 transuncovertebral joint screw placement for occipitocervical fixation. METHODS: A 67-year-old patient suffered myelopathy due to instability at C1-2. The patient had bilateral high-riding vertebral arteries that precluded the use of a C2 pedicle screw or a C1-2 transarticular screw. RESULTS: A C2-3 transuncovertebral joint screw was applied bilaterally under 3D navigation guidance. The patient's postoperative course was uneventful, and his neurological status improved after the surgery. Bony fusion was achieved after the surgery. CONCLUSIONS: This is the first report to describe the technique of transuncovertebral joint screw. Using a C2-3 transuncovertebral joint screw, a long screw could be used, and it provided an anchor at C3 and C2 from a posterior approach.
Authors: Alexander Mason; Renee Paulsen; Jason M Babuska; Sharad Rajpal; Sigita Burneikiene; E Lee Nelson; Alan T Villavicencio Journal: J Neurosurg Spine Date: 2013-12-20
Authors: Jae Taek Hong; Tomoyuki Takigawa; Ranjith Udayakunmar; Hun Kyu Shin; Peter Simon; Alejandro A Espinoza Orías; Nozomu Inoue; Howard S An Journal: Neurosurgery Date: 2011-09 Impact factor: 4.654