Literature DB >> 26612414

Release of zirconia nanoparticles at the metal stem-bone cement interface in implant loosening of total hip replacements.

Antje Schunck1, Andreas Kronz2, Cornelius Fischer3, Gottfried Hans Buchhorn4.   

Abstract

In a previous failure analysis performed on femoral components of cemented total hip replacements, we determined high volumes of abraded bone cement. Here, we describe the topography of the polished surface of polymethyl methacrylate (PMMA) bone cement containing zirconia radiopacifier, analyzed by scanning electron microscopy and vertical scanning interferometry. Zirconia spikes protruded about 300nm from the PMMA matrix, with pits of former crystal deposition measuring about 400nm in depth. We deduced that the characteristically mulberry-shaped agglomerates of zirconia crystals are ground and truncated into flat surfaces and finally torn out of the PMMA matrix. Additionally, evaluation of in vitro PMMA-on-PMMA articulation confirmed that crystal agglomerations of zirconia were exposed to grain pullout, fatigue, and abrasion. In great quantities, micron-sized PMMA wear and zirconia nanoparticles accumulate in the cement-bone interface and capsular tissues, thereby contributing to osteolysis. Dissemination of nanoparticles to distant lymph nodes and organs of storage has been reported. As sufficient information is lacking, foreign body reactions to accumulated nanosized zirconia in places of long-term storage should be investigated. STATEMENT OF SIGNIFICANCE: The production of wear particles of PMMA bone cement in the interface to joint replacement devices, presents a local challenge. The presence of zirconia particles results in frustrated digestion attempts by macrophages, liberation of inflammatory mediators, and necrosis leading to aseptic inflammation and osteolyses. Attempts to minimize wear of articulating joints reduced the attention to the deterioration of cement cuffs. We therefore investigated polished surfaces of retrieved cuffs to demonstrate their morphology and to measure surface roughness. Industrially admixed agglomerates of the radiopacifier are abraded to micron and nano-meter sized particles. The dissemination of zirconia particles in the reticulo-endothelial system to storage organs is a possible burden. Research to replace the actual contrast media by non-particulate material deserves more attention.
Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Abrasion; Bone cement; Contrast medium; Polishing; Surface roughness; Zirconia

Mesh:

Substances:

Year:  2015        PMID: 26612414     DOI: 10.1016/j.actbio.2015.11.044

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  3 in total

1.  Toxicity, biodistribution and oxidative damage caused by zirconia nanoparticles after intravenous injection.

Authors:  Yue Yang; Huihui Bao; Qianqian Chai; Zhiwen Wang; Zhenning Sun; Changhui Fu; Zhaoping Liu; Zhongjie Liu; Xianwei Meng; Tianlong Liu
Journal:  Int J Nanomedicine       Date:  2019-07-16

2.  Release characteristics of enoxaparin sodium-loaded polymethylmethacrylate bone cement.

Authors:  Hui Sun; Xinzhe Ma; Zhiyong Li; Jianning Liu; Wei Wang; Xiangbei Qi
Journal:  J Orthop Surg Res       Date:  2021-02-04       Impact factor: 2.359

3.  Mixed material wear particle isolation from periprosthetic tissue surrounding total joint replacements.

Authors:  Ashley A Stratton-Powell; Sophie Williams; Joanne L Tipper; Anthony C Redmond; Claire L Brockett
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2022-05-09       Impact factor: 3.405

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.