| Literature DB >> 26610603 |
Víctor M Vidal-Martínez1, Edgar Torres-Irineo2, David Romero3, Gerardo Gold-Bouchot4, Enrique Martínez-Meyer5, David Valdés-Lozano6, M Leopoldina Aguirre-Macedo7.
Abstract
BACKGROUND: Understanding the environmental and anthropogenic factors influencing the probability of occurrence of the marine parasitic species is fundamental for determining the circumstances under which they can act as bioindicators of environmental impact. The aim of this study was to determine whether physicochemical variables, polyaromatic hydrocarbons or sewage discharge affect the probability of occurrence of the larval cestode Oncomegas wageneri, which infects the shoal flounder, Syacium gunteri, in the southern Gulf of Mexico.Entities:
Mesh:
Substances:
Year: 2015 PMID: 26610603 PMCID: PMC4662013 DOI: 10.1186/s13071-015-1222-6
Source DB: PubMed Journal: Parasit Vectors ISSN: 1756-3305 Impact factor: 3.876
Fig. 1Geographical distribution of the larval cestode Oncomegas wageneri in the southern Gulf of Mexico. a Presence (▲) and absence (+) of O. wageneri at the 162 sampling sites of the oceanographic expedition Xcambo 2 between September and October 2005. b Total number of O. wageneri per sampling site. c Probability of occurrence of O. wageneri using a boosted generalised additive model for the full area (n = 162 sampling sites). d Probability of occurrence of O. wageneri using a boosted generalised additive model for the polygon area (n = 134 sampling sites at a depth of 1500 m or above). e Probability of occurrence of O. wageneri using the MaxEnt for the full area. f Probability of occurrence of O. wageneri using the MaxEnt for the polygon area
Geographic position of the sites in the southern Gulf of Mexico, where sediment, water, shoal flounders Syacium gunteri and cestodes Oncomegas wageneri were collected
| Site | Latitude | Longitude | Number of fish collected | Mean standard length of | Infection parameters of | |
|---|---|---|---|---|---|---|
| DD | DD | cm | % | MA ± SD | ||
| 1 | -91.87749 | 19.063737 | 6 | 11.52 ± 0.32 | 100 | 97 ± 51 |
| 2 | -92.924406 | 18.558687 | 10 | 10.41 ± 1.18 | 100 | 81 ± 35 |
| 3 | -92.657425 | 18.691936 | 7 | 10.70 ± 1.42 | 43 | 19 ± 28 |
| 4 | -92.460664 | 18.711013 | 4 | 8.05 ± 1.41 | 75 | 10 ± 9 |
| 5 | -92.50014 | 19.187617 | 10 | 9.01 ± 0.89 | 80 | 29 ± 22 |
| 6 | -91.500028 | 19.374545 | 1 | 23.30 | 100 | 13 |
| 7 | -93.000353 | 18.753978 | 11 | 12.48 ± 1.23 | 89 | 73 ± 60 |
| 8 | -95.501 | 19.001317 | 10 | 10.95 ± 1.17 | 80 | 8 ± 6 |
| 9 | -92.500832 | 18.999193 | 9 | 12.47 ± 2.06 | 100 | 20 ± 22 |
| 10 | -92.006873 | 18.999577 | 3 | 16.87 ± 4.59 | 67 | 62 ± 9 |
| 11 | -91.501037 | 19.500352 | 4 | 23.38 ± 5.54 | 75 | 11 ± 13 |
| 12 | -92.00304 | 18.937508 | 6 | 12.28 ± 0.47 | 100 | 94 ± 68 |
| 13 | -92.375937 | 18.999565 | 6 | 11.18 ± 0.46 | 100 | 39 ± 14 |
| 14 | -95.999833 | 19.501753 | 10 | 12.59 ± 1.31 | 60 | 61 ± 108 |
| 15 | -94.25 | 18.233333 | 10 | 10.97 ± 1.15 | 80 | 13 ± 9 |
| 16 | -92.15496 | 18.88098 | 9 | 11.00 ± 0.71 | 100 | 34 ± 15 |
| 17 | -92.986852 | 18.483098 | 4 | 11.25 ± 0.26 | 100 | 110 ± 44 |
| 18 | -93.00009 | 18.50345 | 11 | 11.35 ± 1.23 | 82 | 60 ± 40 |
| 19 | -93.20285 | 18.62565 | 10 | 17.78 ± 5.62 | 80 | 22 ± 23 |
| 20 | -92.81203 | 18.691928 | 11 | 9.81 ± 0.97 | 100 | 33 ± 27 |
| 21 | -92.563643 | 19.126108 | 11 | 11.32 ± 1.88 | 90 | 37 ± 23 |
| 22 | -92.50009 | 19.251617 | 6 | 13.37 ± 4.15 | 17 | 27 |
| 23 | -92.18765 | 18.938898 | 4 | 10.74 ± 0.82 | 100 | 40 ± 46 |
| 24 | -92.252252 | 18.772892 | 3 | 8.83 ± 2.48 | 100 | 25 ± 27 |
| 25 | -92.12616 | 19.063458 | 5 | 14.16 ± 7.30 | 80 | 51 ± 53 |
| 26 | -94.000493 | 18.375 | 6 | 15.13 ± 0.93 | 100 | 26 ± 30 |
| 27 | -92.390441 | 18.68429 | 2 | 10.45 ± 5.65 | 100 | 43 ± 39 |
| 28 | -92.063815 | 18.812852 | 4 | 10.90 ± 5.53 | 100 | 11 ± 7 |
| 29 | -94.499377 | 18.753407 | 1 | 11.30 | 100 | 214 |
DD = decimal degrees, % = prevalence, MA ± SD = mean abundance ± standard deviation. See Additional file 1: Table S1 for a complete list of physicochemical parameters and contaminants from water and sediments
Independent variables selected by the boosted general additive model (boosted GAM) for the full area and polygon area models
| Independent variables | Units | Full area | Polygon area | |
|---|---|---|---|---|
| Fr (%) | Fr(%) | |||
| 1 | bspatial (Lon, Lat) | DD | 1.45 | 18.90 |
| 2 | bbs (Total depth, S) | m | - | 4.80 |
| 3 | bbs (Temperature, W) | °C | 0.09 | 5.40 |
| 4 | bbs (Salinity, W) | UPS | 0.13 | 0.60 |
| 5 | bbs (Oxygen, W) | (mg/L) | 0.17 | 5.00 |
| 6 | bbs (Alkalinity, W) | meq/l | 0.13 | 2.10 |
| 7 | bbs (CO2, W) | mmol/l | 0.13 | 2.10 |
| 8 | bbs (Nitrate, W) | μMolar | 0.21 | 3.00 |
| 9 | bbs (Phosphate, W) | μMolar | 0.09 | 0.70 |
| 10 | bbs (Silicate, W) | μMolar | - | 1.10 |
| 11 | bbs(Sigma T, W) | Kg/m3 | 0.30 | - |
| 12 | bbs(Sand, S) | % | - | 0.50 |
| 13 | bbs (Silt, S) | % | - | 1.10 |
| 14 | bbs (Clay, S) | % | 0.04 | - |
| 15 | bbs (Phosporus, S) | micromol/g | 0.04 | 0.60 |
| 16 | bbs (Nitrogen, S) | micromol/g | - | 1.30 |
| 17 | bbs (PAHL, S) | μg/g | 0.47 | 5.70 |
| 18 | bbs (PAHH, S) | μg/g | 94.70 | 6.90 |
| 19 | bbs (Aliphatic PAHs, S) | μg/g | - | 0.60 |
| 20 | bbs (PCNM2) | DD | 0.30 | 24.00 |
| 21 | bbs (PCNM21) | DD | 0.47 | 3.70 |
| 22 | bbs (PCNM58) | DD | 0.68 | 11.90 |
Fr (%) is the frequency at which each variable is selected during the bootstrapping, and used as proxy of the importance of each of the variables (expressed as percentage) within the model. bbs = base-learner based on B-splines, bspatial = spatial base-learner on geographical coordinates. W = water, S = sediment; PAHL and PAHH are polyaromatic hydrocarbons of low and high molecular weight respectively; PCNM2, PCNM21 and PCNM58 are the spatial variables of the principal coordinates of neighbour matrices (PCNM) analysis, acting at 2, 21 and 58 km respectively
Performance statistics of the boosted general additive model (boosted GAM) and MaxEnt models for Oncomegas wageneri for the full area and the polygon area
| Boosted GAM | MaxEnt | |||
|---|---|---|---|---|
| Full area | Polygon area | Full area | Polygon area | |
| Kappa | 0.823 | 0.823 | 0.577 | 0.434 |
| AUC | 0.970 | 0.959 | 0.679 | 0.466 |
| pROC | 0.837 | 0.833 | 0.737 | 0.649 |
| (0.722-0.941)a | (0.725-0.949) | (0.561-0.912) | (0.474-1.000) | |
Kappa = Cohen’s kappa, AUC = area under the curve and pROC = partial receiver operating characteristic curve. a The values in brackets were the ranges obtained by bootstrapping