Electrospun cellulose acetate supported Ag@AgCl composites with facet-dependent photocatalytic properties on degradation of organic dyes under visible-light irradiation.

Electrospun cellulose acetate (CA) membrane was employed as a support that provided sites for AgCl crystals in situ growth. The Ag@AgCl crystals on electrospun CA composites with exposed {100} and {111} facets were fabricated at room temperature by a double diffusion technique. The crystal structure, morphology, composition, and absorption light ability of CA supported Ag@AgCl were characterized utilizing X-ray powder diffraction (XRD), scanning electron microscopy (SEM), attenuated total reflection-infrared intensity (ATR-IR), X-ray photoelectron spectroscopy measurements (XPS), energy dispersive spectrometer (EDS) and ultraviolet-visible (UV-vis) diffuse reflectance spectra, respectively. The photocatalytic activity of the catalysts was evaluated using methyl orange (MO) as a target. The CA supported cubic Ag@AgCl catalyst exhibited much higher catalytic activity than octahedral catalyst in terms of the degradation of MO under visible light. The 10mg CA based cubes could completely degrade MO (10 mg L(-1)) in 160 min. The photocatalyst still exhibited a good catalytic ability after three times.