Literature DB >> 26545292

Stereolithography of SiOC Ceramic Microcomponents.

Erika Zanchetta1, Marco Cattaldo1, Giorgia Franchin1, Martin Schwentenwein2, Johannes Homa2, Giovanna Brusatin1, Paolo Colombo1,3.   

Abstract

The first example of the fabrication of complex 3D polymer-derived-ceramic structures is presented with micrometer-scale features by a 3D additive manufacturing (AM) technology, starting with a photosensitive preceramic precursor. Dense and crack-free silicon-oxycarbide-based microparts with features down to 200 μm are obtained after pyrolysis at 1000 °C in a nitrogen atmosphere.
© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entities:  

Keywords:  3D printing; additive manufacturing; ceramics; preceramic polymers; stereolithography

Year:  2015        PMID： 26545292     DOI： 10.1002/adma.201503470

Source DB:  PubMed          Journal:  Adv Mater        ISSN： 0935-9648            Impact factor:   30.849


  16 in total

1.  Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties.

Authors:  Zhuoran Jiang; Ozan Erol; Devina Chatterjee; Weinan Xu; Narutoshi Hibino; Lewis H Romer; Sung Hoon Kang; David H Gracias
Journal:  ACS Appl Mater Interfaces       Date:  2019-07-23       Impact factor: 9.229

2.  In situ 4D tomography image analysis framework to follow sintering within 3D-printed glass scaffolds.

Authors:  Achintha I Kondarage; Gowsihan Poologasundarampillai; Amy Nommeots-Nomm; Peter D Lee; Thilina D Lalitharatne; Nuwan D Nanayakkara; Julian R Jones; Angelo Karunaratne
Journal:  J Am Ceram Soc       Date:  2021-11-03       Impact factor: 4.186

Review 3.  Additive Manufacturing: Unlocking the Evolution of Energy Materials.

Authors:  Adilet Zhakeyev; Panfeng Wang; Li Zhang; Wenmiao Shu; Huizhi Wang; Jin Xuan
Journal:  Adv Sci (Weinh)       Date:  2017-07-25       Impact factor: 16.806

4.  Hydrogel-based Additive Manufacturing of Lithium Cobalt Oxide.

Authors:  Daryl W Yee; Michael A Citrin; Zane W Taylor; Max A Saccone; Victoria L Tovmasyan; Julia R Greer
Journal:  Adv Mater Technol       Date:  2020-11-11

5.  Digital Light Processing 3D-Printed Ceramic Metamaterials for Electromagnetic Wave Absorption.

Authors:  Rui Zhou; Yansong Wang; Ziyu Liu; Yongqiang Pang; Jianxin Chen; Jie Kong
Journal:  Nanomicro Lett       Date:  2022-05-05

6.  Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures.

Authors:  Giorgia Franchin; Halide Selin Maden; Larissa Wahl; Andrea Baliello; Marco Pasetto; Paolo Colombo
Journal:  Materials (Basel)       Date:  2018-03-28       Impact factor: 3.623

7.  Silane-Acrylate Chemistry for Regulating Network Formation in Radical Photopolymerization.

Authors:  Johannes Steindl; Thomas Koch; Norbert Moszner; Christian Gorsche
Journal:  Macromolecules       Date:  2017-09-18       Impact factor: 5.985

8.  Origami and 4D printing of elastomer-derived ceramic structures.

Authors:  Guo Liu; Yan Zhao; Ge Wu; Jian Lu
Journal:  Sci Adv       Date:  2018-08-17       Impact factor: 14.136

Review 9.  Establishing a point-of-care additive manufacturing workflow for clinical use.

Authors:  Georges E Daoud; Dante L Pezzutti; Calvin J Dolatowski; Ricardo L Carrau; Mary Pancake; Edward Herderick; Kyle K VanKoevering
Journal:  J Mater Res       Date:  2021-07-06       Impact factor: 3.089

10.  Damage-tolerant 3D-printed ceramics via conformal coating.

Authors:  Seyed Mohammad Sajadi; Lívia Vásárhelyi; Reza Mousavi; Amir Hossein Rahmati; Zoltán Kónya; Ákos Kukovecz; Taib Arif; Tobin Filleter; Robert Vajtai; Peter Boul; Zhenqian Pang; Teng Li; Chandra Sekhar Tiwary; Muhammad M Rahman; Pulickel M Ajayan
Journal:  Sci Adv       Date:  2021-07-07       Impact factor: 14.136
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.