Literature DB >> 26509252

Rapid Software-Based Design and Optical Transient Liquid Molding of Microparticles.

Chueh-Yu Wu1, Keegan Owsley1, Dino Di Carlo1.   

Abstract

Microparticles with complex 3D shape and composition are produced using a novel fabrication method, optical transient liquid molding, in which a 2D light pattern exposes a photopolymer precursor stream shaped along the flow axis by software-aided inertial flow engineering.
© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Keywords:  inertial microfluidics; microgels; microparticles; optofluidics; soft materials

Mesh：

Year:  2015        PMID： 26509252     DOI： 10.1002/adma.201503308

Source DB:  PubMed          Journal:  Adv Mater        ISSN： 0935-9648            Impact factor:   30.849


  4 in total

1.  Microfluidic Hydrodynamic Focusing for Synthesis of Nanomaterials.

Authors:  Mengqian Lu; Adem Ozcelik; Christopher L Grigsby; Yanhui Zhao; Feng Guo; Kam W Leong; Tony Jun Huang
Journal:  Nano Today       Date:  2016-11-12       Impact factor: 20.722

2.  Deep Learning for Flow Sculpting: Insights into Efficient Learning using Scientific Simulation Data.

Authors:  Daniel Stoecklein; Kin Gwn Lore; Michael Davies; Soumik Sarkar; Baskar Ganapathysubramanian
Journal:  Sci Rep       Date:  2017-04-12       Impact factor: 4.379

3.  DIY 3D Microparticle Generation from Next Generation Optofluidic Fabrication.

Authors:  Kevin S Paulsen; Yanxiang Deng; Aram J Chung
Journal:  Adv Sci (Weinh)       Date:  2018-06-01       Impact factor: 16.806

4.  Shaped 3D microcarriers for adherent cell culture and analysis.

Authors:  Chueh-Yu Wu; Daniel Stoecklein; Aditya Kommajosula; Jonathan Lin; Keegan Owsley; Baskar Ganapathysubramanian; Dino Di Carlo
Journal:  Microsyst Nanoeng       Date:  2018-08-13       Impact factor: 7.127
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.