Literature DB >> 26479916

Comparative study of the effect of pharmaceutical additives on the elimination of antibiotic activity during the treatment of oxacillin in water by the photo-Fenton, TiO2-photocatalysis and electrochemical processes.

Efraim A Serna-Galvis1, Javier Silva-Agredo1, Ana L Giraldo2, Oscar A Flórez-Acosta2, Ricardo A Torres-Palma3.   

Abstract

Synthetic pharmaceutical effluents loaded with the β-lactam antibiotic oxacillin were treated using advanced oxidation processes (the photo-Fenton system and TiO2 photocatalysis) and chloride mediated electrochemical oxidation (with Ti/IrO2 anodes). Combinations of the antibiotic with excipients (mannitol or tartaric acid), an active ingredient (calcium carbonate, i.e. bicarbonate ions due to the pH) and a cleaning agent (sodium lauryl ether sulfate) were considered. Additionally, urban wastewater that had undergone biological treatment was doped with oxacillin and treated with the tested systems. The evolution of antimicrobial activity was monitored as a parameter of processes efficiency. Although the two advanced oxidation processes (AOPs) differ only in the way they produce OH, marked differences were observed between them. There were also differences between the AOPs and the electrochemical system. Interestingly, each additive had a different effect on each treatment. For water loaded with mannitol, electrochemical treatment was the most suitable option because the additive did not significantly affect the efficiency of the system. Due to the formation of a complex with Fe(3+), tartaric acid accelerated the elimination of antibiotic activity during the photo-Fenton process. For TiO2 photocatalysis, the presence of bicarbonate ions contributed to antibiotic activity elimination through the possible formation of carbonate and bicarbonate radicals. Sodium lauryl ether sulfate negatively affected all of the processes. However, due to the higher selectivity of HOCl compared with OH, electrochemical oxidation showed the least inhibited efficiency. For the urban wastewater doped with oxacillin, TiO2 photocatalysis was the most efficient process. These results will help select the most suitable technology for the treatment of water polluted with β-lactam antibiotics.
Copyright © 2015 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Advanced oxidation process; Anodic oxidation; Pharmaceutics; Water matrix; Water treatment; β-Lactam antibiotics

Mesh:

Substances:

Year:  2015        PMID: 26479916     DOI: 10.1016/j.scitotenv.2015.10.029

Source DB:  PubMed          Journal:  Sci Total Environ        ISSN: 0048-9697            Impact factor:   7.963


  4 in total

1.  Removal of antibiotic cloxacillin by means of electrochemical oxidation, TiO2 photocatalysis, and photo-Fenton processes: analysis of degradation pathways and effect of the water matrix on the elimination of antimicrobial activity.

Authors:  Efraim A Serna-Galvis; Ana L Giraldo-Aguirre; Javier Silva-Agredo; Oscar A Flórez-Acosta; Ricardo A Torres-Palma
Journal:  Environ Sci Pollut Res Int       Date:  2016-02-26       Impact factor: 4.223

2.  Role of sulfate, chloride, and nitrate anions on the degradation of fluoroquinolone antibiotics by photoelectro-Fenton.

Authors:  Paola Villegas-Guzman; Florian Hofer; Javier Silva-Agredo; Ricardo A Torres-Palma
Journal:  Environ Sci Pollut Res Int       Date:  2017-10-10       Impact factor: 4.223

3.  Probing the degradation of pharmaceuticals in urine using MFC and studying their removal efficiency by UPLC-MS/MS.

Authors:  Priya Sharma; Devendra Kumar; Srikanth Mutnuri
Journal:  J Pharm Anal       Date:  2020-04-30

4.  Photocatalytic degradation of dimethoate in Bok choy using cerium-doped nano titanium dioxide.

Authors:  Xiangying Liu; Yu Li; Xuguo Zhou; Kun Luo; Lifeng Hu; Kailin Liu; Lianyang Bai
Journal:  PLoS One       Date:  2018-05-17       Impact factor: 3.240

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.