Evaluation of a brushing machine for estimating density of spider mites on grape leaves.

Direct visual inspection and enumeration for estimating field population density of economically important arthropods, such as spider mites, provide more information than alternative methods, such as binomial sampling, but is laborious and time consuming. A brushing machine can reduce sampling time and perhaps improve accuracy. Although brushing technology has been investigated and recommended as a useful tool for researchers and integrated pest management practitioners, little work to demonstrate the validity of this technique has been performed since the 1950's. We investigated the brushing machine manufactured by Leedom Enterprises (Mi-Wuk Village, CA, USA) for studies on spider mites. We evaluated (1) the mite recovery efficiency relative to the number of passes of a leaf through the brushes, (2) mite counts as generated by the machine compared to visual counts under a microscope, (3) the lateral distribution of mites on the collection plate and (4) the accuracy and precision of a 10% sub-sample using a double-transect counting grid. We found that about 95% of mites on a leaf were recovered after five passes, and 99% after nine passes, and mite counts from brushing were consistently higher than those from visual inspection. Lateral distribution of mites was not uniform, being highest in concentration at the center and lowest at the periphery. The 10% double-transect pattern did not result in a significant correlation with the total plate count at low mite density, but accuracy and precision improved at medium and high density. We suggest that a more accurate and precise sample may be achieved using a modified pattern which concentrates on the center plus some of the adjacent area.