Literature DB >> 26344313

Effect of Ca(2+), Fe(2+) and Mg(2+) on rheological properties of new food matrix made of modified cell wall polysaccharides from apple.

Joanna Mierczyńska1, Justyna Cybulska2, Bartosz Sołowiej3, Artur Zdunek1.   

Abstract

A new food matrix made of modified cell wall polysaccharides (MPS) from apple pomace was developed. In this experiment, an effect of metal divalent ions: calcium, magnesium and iron ions on rheological properties of MPS was studied. An increase of Ca(2+) or Fe(2+) concentration in MPS suspensions significantly increased viscosity as well as elastic (G') and viscous (G″) moduli. Contrary, Mg(2+) addition caused a significant decrease of viscosity, G' and G″. Herschel-Bulkley's model fitted to shear stress vs. shear strain (flow curves) showed that calcium and iron ions increased pseudoplasticity and viscosity proportionally to concentration. The addition of any studied metal ions to MPS increased thixotropic effect. A temperature at the gel point increased when concentration increased to 9mM, then the gel points appeared at lower temperatures again for higher concentrations. This study showed that the MPS is an effective texture modifier with a controlled function by metal ions.
Copyright © 2015 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Flow; Food matrix; Pectins; Polysaccharides; Rheology; Thixotropy

Mesh:

Substances:

Year:  2015        PMID: 26344313     DOI: 10.1016/j.carbpol.2015.07.046

Source DB:  PubMed          Journal:  Carbohydr Polym        ISSN: 0144-8617            Impact factor:   9.381


  3 in total

1.  The Effect of Water Mineralization on the Extraction of Active Compounds from Selected Herbs and on the Antioxidant Properties of the Obtained Brews.

Authors:  Jakub Wyrostek; Radosław Kowalski
Journal:  Foods       Date:  2021-05-28

2.  Effect of Tara Gum Addition on Steady and Dynamic Shear Rheological Properties of Rice Starch Isolated from the Korean Rice Variety 'Boramchan'.

Authors:  Sang-Hun Yoo; Yoon Hyuk Chang
Journal:  Prev Nutr Food Sci       Date:  2018-09-30

3.  Application of Xanthan Gum as a Pre-Treatment and Sharpness Evaluation for Inkjet Printing on Polyester.

Authors:  Hongmei Cao; Li Ai; Zhenming Yang; Yawei Zhu
Journal:  Polymers (Basel)       Date:  2019-09-16       Impact factor: 4.329

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.