Literature DB >> 26344188

Color stability of denture resins after staining and exposure to cleansing agents.

Scott Hollis1, Elaine Eisenbeisz2, Antheunis Versluis3.   

Abstract

STATEMENT OF PROBLEM: Hard denture acrylic resins must maintain color stability to remain esthetic.
PURPOSE: The purpose of this in vitro study was to measure the color stability of denture resins subjected to staining agents and cleaned with denture cleansers
MATERIAL AND METHODS: Forty-five disks (10-mm diameter, 2-mm thick) fabricated from 3 denture resins (light polymerized Eclipse; heat polymerized Lucitone 199 Heat; autopolymerized Lucitone 199 Repair) were stored for 24 hours in 37°C water. After baseline colorimetry measurement were made, the specimens were soaked for 8 hours in a staining agent: coffee, cola, or grape juice. Subsequently, the specimens were soaked for 12 hours in a commercial denture cleanser (Polident, GlaxoSmithKline; Efferdent, Prestige Brands Inc) or water (control). This procedure was repeated every 24 hours. Staining agents and cleansers were replenished every 24 hours. Color change (ΔE) was determined after 2, 4, 6, and 8 weeks (n=5). Results were submitted to analysis of variance and Tukey honest significant difference test (α=.05).
RESULTS: Significant interaction was found between cleansers and staining agents (P=.006), cleansers and resins (P=.034), and resins and staining agents (P<.001). For the staining agent of grape juice, water allowed more discoloration (ΔE=16.93) than Efferdent (ΔE=14.41) or Polident (ΔE=14.81); Efferdent and Polident effects were not significantly different (P=.761). The Lucitone 199 Repair resin cleaned with water discolored more (ΔE=15.24) than with Efferdent (ΔE=14.14) or Polident (mean ΔE=13.82); the difference between Polident and Efferdent was not significant (P=.566). For Eclipse, grape juice discolored more (ΔE=16.43) than coffee (ΔE=12.23; P<.001) or cola (ΔE=13.78; P=.001); coffee and cola staining were not significantly different (P=.071).
CONCLUSIONS: Eclipse resin stained most, especially in grape juice. Compared with water, Polident and Efferdent reduced discoloration better in Lucitone 199 Repair and grape juice stains. Nevertheless, discolorations in all 3 resins were perceivable, regardless of cleanser.
Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2015        PMID: 26344188     DOI: 10.1016/j.prosdent.2015.06.001

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  6 in total

1.  Effect of Different Solutions on the Colour Stability of Nanoparticles or Fibre Reinforced PMMA.

Authors:  Abdulaziz Alhotan; Alaaeldin Elraggal; Julian Yates; Julfikar Haider; Carlos Alberto Jurado; Nikolaos Silikas
Journal:  Polymers (Basel)       Date:  2022-04-08       Impact factor: 4.967

2.  Effects of thermocycling and various drinks on the color stability of heat-polymerized acrylic resin.

Authors:  Pinar Altinci; Pinar Durkaya
Journal:  J Istanb Univ Fac Dent       Date:  2016-10-01

3.  A Comparison of the Color Stability of Conventional and CAD/CAM Polymethyl Methacrylate Denture Base Materials.

Authors:  Cagatay Dayan; Melahat Celik Guven; Burc Gencel; Canan Bural
Journal:  Acta Stomatol Croat       Date:  2019-06

4.  The Effects of Staining and Cleaning on the Color and Light Transmittance Changes of a Copolyester Retainer Material with Different Surface Textures.

Authors:  Laurie Susarchick; Insia Virji; Grace Viana; Mervat Mahmoud; Veerasathpurush Allareddy; Max Gruber; Henry Lukic; Spiro Megremis; Phimon Atsawasuwan
Journal:  Materials (Basel)       Date:  2022-09-30       Impact factor: 3.748

5.  Properties of an acrylic resin after immersion in antiseptic soaps: Low-cost, easy-access procedure for the prevention of denture stomatitis.

Authors:  Jacqueline de Oliveira Zoccolotti; Camilla Olga Tasso; Maria Isabel Amaya Arbeláez; Isadora Ferreira Malavolta; Eduarda Carolina da Silva Pereira; Caroline Stefanie Gomes Esteves; Janaina Habib Jorge
Journal:  PLoS One       Date:  2018-08-30       Impact factor: 3.240

6.  Effects of storage and toothbrush simulation on color, gloss, and roughness of CAD/CAM, hand-cast, thermoforming, and 3D-printed splint materials.

Authors:  Verena Hickl; Thomas Strasser; Alois Schmid; Martin Rosentritt
Journal:  Clin Oral Investig       Date:  2022-02-04       Impact factor: 3.606

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.