Influence of Dissolved Metals on N-Nitrosamine Formation under Amine-based CO2 Capture Conditions.

As the prime contender for postcombustion CO2 capture technology, amine-based scrubbing has to address the concerns over the formation of potentially carcinogenic N-nitrosamine byproducts from reactions between flue gas NOx and amine solvents. This bench-scale study evaluated the influence of dissolved metals on the potential to form total N-nitrosamines in the solvent within the absorber unit and upon a pressure-cooker treatment that mimics desorber conditions. Among six transition metals tested for the benchmark solvent monoethanolamine (MEA), dissolved Cu promoted total N-nitrosamine formation in the absorber unit at concentrations permitted in drinking water, but not the desorber unit. The Cu effect increased with oxygen concentration. Variation of the amine structural characteristics (amine order, steric hindrance, -OH group substitution and alkyl chain length) indicated that Cu promotes N-nitrosamine formation from primary amines with hydroxyl or carboxyl groups (amino acids), but not from secondary amines, tertiary amines, sterically hindered primary amines, or amines without oxygenated groups. Ethylenediaminetetraacetate (EDTA) suppressed the Cu effect. The results suggested that the catalytic effect of Cu may be associated with the oxidative degradation of primary amines in the absorber unit, a process known to produce a wide spectrum of secondary amine products that are more readily nitrosatable than the pristine primary amines, and that can form stable N-nitrosamines. This study highlighted an intriguing linkage between amine degradation (operational cost) and N-nitrosamine formation (health hazards), all of which are challenges for commercial-scale CO2 capture technology.