Literature DB >> 26322958

Mechanical Properties of Molybdenum Disulfide and the Effect of Doping: An in Situ TEM Study.

Aleksander A Tedstone1, David J Lewis1, Rui Hao2, Shi-Min Mao2, Pascal Bellon2, Robert S Averback2, Christopher P Warrens, Kevin R West, Philip Howard, Sander Gaemers, Shen J Dillon2, Paul O'Brien1.   

Abstract

Direct observations on nanopillars composed of molybdenum disulfide (MoS2) and chromium-doped MoS2 and their response to compressive stress have been made. Time-resolved transmission electron microscopy (TEM) during compression of the submicrometer diameter pillars of MoS2- and Cr-doped MoS2 (Cr: 0, 10, and 50 at %) allow the deformation process of the material to be observed and can be directly correlated with mechanical response to applied load. The addition of chromium to the MoS2 changed the failure mode from plastic deformation to catastrophic brittle fracture, an effect that was more pronounced as chromium content increased.

Entities:  

Keywords:  antiwear films; in situ electron microscopy; transition metal dichalcogenides; tribology

Year:  2015        PMID: 26322958     DOI: 10.1021/acsami.5b06055

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  5 in total

1.  Synthesis of indium oxide microparticles using aerosol assisted chemical vapour deposition.

Authors:  Firoz Alam; David J Lewis
Journal:  RSC Adv       Date:  2020-06-11       Impact factor: 4.036

2.  Solid lubricant behavior of MoS2 and WSe2-based nanocomposite coatings.

Authors:  Santiago Domínguez-Meister; Teresa Cristina Rojas; Marta Brizuela; Juan Carlos Sánchez-López
Journal:  Sci Technol Adv Mater       Date:  2017-03-01       Impact factor: 8.090

Review 3.  Experimental and Simulation Research on the Preparation of Carbon Nano-Materials by Chemical Vapor Deposition.

Authors:  Bo Yang; Lanxing Gao; Miaoxuan Xue; Haihe Wang; Yanqing Hou; Yingchun Luo; Han Xiao; Hailiang Hu; Can Cui; Huanjiang Wang; Jianhui Zhang; Yu-Feng Li; Gang Xie; Xin Tong; Yadian Xie
Journal:  Materials (Basel)       Date:  2021-11-30       Impact factor: 3.623

4.  Mechanical anisotropy of two-dimensional metamaterials: a computational study.

Authors:  Ning Liu; Mathew Becton; Liuyang Zhang; Keke Tang; Xianqiao Wang
Journal:  Nanoscale Adv       Date:  2019-05-31

5.  Scalable and Universal Route for the Deposition of Binary, Ternary, and Quaternary Metal Sulfide Materials from Molecular Precursors.

Authors:  Ghulam Murtaza; Suliman Alderhami; Yasser T Alharbi; Usama Zulfiqar; Mousa Hossin; Abdulaziz M Alanazi; Laila Almanqur; Emmanuel Usman Onche; Sai P Venkateswaran; David J Lewis
Journal:  ACS Appl Energy Mater       Date:  2020-01-22
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.