Literature DB >> 2632144

Hierarchical structure of the intervertebral disc.

J J Cassidy1, A Hiltner, E Baer.   

Abstract

Optical microscope techniques are used to characterize the hierarchical structure of the collagenous components of the human intervertebral disc. In the anterior annulus fibrosus, the thickness of lamellae increases abruptly 2 mm inward from the edge of the disc, dividing the annulus into peripheral and transitional regions. Lamellae in the lateral and posterior aspects of the disc have a broad distribution of lamellar thicknesses throughout the annulus. In alternating lamellae, fibers are inclined with respect to the vertical axis of the spine in a layup structure. From the edge of the disc inward to the nucleus, this interlamellar angle decreases from +62 to +45 degrees. Within lamellae, the collagen fibers exhibit a planar crimped morphology. The plane of the waveform is inclined with respect to the vertical axis by the interlamellar angle. From the edge of the disc inward, the crimp angle increases from 20 to 45 degrees and the crimp period decreases from 26 to 20 um. A hierarchical model of the intervertebral disc has been developed that incorporates these morphological gradients.

Entities:  

Mesh:

Year:  1989        PMID: 2632144     DOI: 10.3109/03008208909103905

Source DB:  PubMed          Journal:  Connect Tissue Res        ISSN: 0300-8207            Impact factor:   3.417


  104 in total

1.  Mechanisms for mechanical damage in the intervertebral disc annulus fibrosus.

Authors:  J C James C Iatridis; Iolo ap Gwynn
Journal:  J Biomech       Date:  2004-08       Impact factor: 2.712

2.  On how nucleus-endplate integration is achieved at the fibrillar level in the ovine lumbar disc.

Authors:  Kelly R Wade; Peter A Robertson; Neil D Broom
Journal:  J Anat       Date:  2012-04-26       Impact factor: 2.610

3.  Design Requirements for Annulus Fibrosus Repair: Review of Forces, Displacements, and Material Properties of the Intervertebral Disk and a Summary of Candidate Hydrogels for Repair.

Authors:  Rose G Long; Olivia M Torre; Warren W Hom; Dylan J Assael; James C Iatridis
Journal:  J Biomech Eng       Date:  2016-02       Impact factor: 2.097

4.  Intralamellar relationships within the collagenous architecture of the annulus fibrosus imaged in its fully hydrated state.

Authors:  Celina A Pezowicz; Peter A Robertson; Neil D Broom
Journal:  J Anat       Date:  2005-10       Impact factor: 2.610

5.  Osmoviscoelastic finite element model of the intervertebral disc.

Authors:  Yvonne Schroeder; Wouter Wilson; Jacques M Huyghe; Frank P T Baaijens
Journal:  Eur Spine J       Date:  2006-05-25       Impact factor: 3.134

6.  Regional variations in the density and arrangement of elastic fibres in the anulus fibrosus of the human lumbar disc.

Authors:  Lachlan J Smith; Nicola L Fazzalari
Journal:  J Anat       Date:  2006-09       Impact factor: 2.610

7.  Three-dimensional morphology of the pericellular matrix of intervertebral disc cells in the rat.

Authors:  Li Cao; Farshid Guilak; Lori A Setton
Journal:  J Anat       Date:  2007-08-02       Impact factor: 2.610

8.  Modeling interlamellar interactions in angle-ply biologic laminates for annulus fibrosus tissue engineering.

Authors:  Nandan L Nerurkar; Robert L Mauck; Dawn M Elliott
Journal:  Biomech Model Mechanobiol       Date:  2011-02-03

Review 9.  Mechanical design criteria for intervertebral disc tissue engineering.

Authors:  Nandan L Nerurkar; Dawn M Elliott; Robert L Mauck
Journal:  J Biomech       Date:  2010-01-18       Impact factor: 2.712

10.  Tensile properties of the annulus fibrosus II. Ultimate tensile strength and fatigue life.

Authors:  T P Green; M A Adams; P Dolan
Journal:  Eur Spine J       Date:  1993-12       Impact factor: 3.134

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.