Long-Term Formaldehyde Emissions from Medium-Density Fiberboard in a Full-Scale Experimental Room: Emission Characteristics and the Effects of Temperature and Humidity.

We studied formaldehyde emissions from the medium-density fiberboard (MDF) in a full-scale experimental room to approximate emissions in actual buildings. Detailed indoor formaldehyde concentrations and temperature and humidity data were obtained for about 29 months. Temperature, relative humidity (RH), and absolute humidity (AH) ranged over -10.9-31.4 °C, 46.5-83.6%, and 1.1-23.1 g/kgair, respectively. Annual cyclical seasonal variations were observed for indoor formaldehyde concentrations and emission rates, exhibiting entirely different characteristics than those in an environmental chamber under constant environmental conditions. The maximum concentration occurred in summer rather than at initial introduction of the material. The concentrations in summer could be a few up to 20 times higher than that in winter, depending on the indoor temperature and humidity conditions. Concentrations decreased by 20-65% in corresponding months of the second year. Indoor formaldehyde concentrations were positively correlated with temperature and AH but were poorly correlated with RH. The combined effects of temperature and AH on formaldehyde emissions from MDF in actual buildings were verified. These detailed long-term experimental results could be used with environmental chamber measurement data to scale up and validate emission models from chambers held at constant conditions to actual buildings.