Literature DB >> 26230376

Occupational allergic contact dermatitis caused by epoxy chemicals: occupations, sensitizing products, and diagnosis.

Kristiina Aalto-Korte1, Maria Pesonen1, Katri Suuronen1.   

Abstract

BACKGROUND: Epoxy products are among the most common causes of occupational allergic contact dermatitis. Diglycidyl ether of bisphenol A resin (DGEBA-R) is the most important sensitizer in epoxy systems.
OBJECTIVES: To describe patients with occupational allergic contact dermatitis caused by epoxy products.
METHODS: Patients with allergic reactions to epoxy chemicals were chosen from test files (January 1991 to June 2014). Only patients with occupational contact allergy to some component of epoxy resin systems were included. We analysed patch test results, occupation, symptoms, and exposure data.
RESULTS: We found a total of 209 cases with occupational contact allergy to epoxy chemicals. The largest occupational groups were painters (n = 41), floor layers (n = 19), electrical industry workers (n = 19), tile setters (n = 16), and aircraft industry workers (n = 15). A total of 82% of the patients reacted to DGEBA-R. Diagnosis of the DGEBA-R-negative patients required testing with m-xylylenediamine, N,N'-tetraglycidyl-4,4'-methylenedianiline, 1,4-butanediol diglycidyl ether, 2,4,6-tris-(dimethylaminomethyl)phenol, diglycidyl ether of bisphenol F resin, N,N'-diglycidyl-4-glycidyloxyaniline, isophoronediamine, 4,4'-diaminodiphenylmethane, diethylenetriamine, and cresyl glycidyl ether. The hands/upper extremities were most commonly affected (69%), but facial symptoms were also frequent (60%).
CONCLUSIONS: Allergic contact dermatitis caused by to epoxy products cannot always be diagnosed by the use of commercial test substances. Workplace products need to be tested.
© 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Entities:  

Keywords:  aircraft industry; coating; electrical industry; floor laying; painters; pipe relining; tile setting

Mesh:

Substances:

Year:  2015        PMID: 26230376     DOI: 10.1111/cod.12445

Source DB:  PubMed          Journal:  Contact Dermatitis        ISSN: 0105-1873            Impact factor:   6.600


  4 in total

1.  In vitro toxicity assessment of emitted materials collected during the manufacture of water pipe plastic linings.

Authors:  Lisa Kobos; Seyedeh Mahboobeh Teimouri Sendesi; Andrew J Whelton; Brandon E Boor; John A Howarter; Jonathan Shannahan
Journal:  Inhal Toxicol       Date:  2019-06-12       Impact factor: 2.724

2.  Characterization of Polyester Coatings Intended for Food Contact by Different Analytical Techniques and Migration Testing by LC-MSn.

Authors:  Antía Lestido-Cardama; Patricia Vázquez-Loureiro; Raquel Sendón; Juana Bustos; Mª Isabel Santillana; Perfecto Paseiro Losada; Ana Rodríguez Bernaldo de Quirós
Journal:  Polymers (Basel)       Date:  2022-01-26       Impact factor: 4.329

3.  Characterization of patients with occupational allergy to two new epoxy hardener compounds.

Authors:  Sari Suomela; Maria Pesonen; Katriina Ylinen; Kristiina Aalto-Korte; Katri Suuronen
Journal:  Contact Dermatitis       Date:  2022-04-19       Impact factor: 6.419

4.  Multiple subcutaneous granulomas and severe rhinitis after intradermal deposition of epoxy: a case report.

Authors:  Steffen Roth; Anne Kristin Møller Fell
Journal:  J Occup Med Toxicol       Date:  2016-06-23       Impact factor: 2.646

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.