Literature DB >> 26211563

Comparison of the Resistance of Teeth Instrumented with Different Nickel-Titanium Systems to Vertical Root Fracture: An In Vitro Study.

Ersan Çiçek1, M Ali Aslan2, Oğuzhan Akkoçan3.   

Abstract

INTRODUCTION: This study compared the fracture resistance of teeth instrumented with ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Next (PTN, Dentsply Maillefer), WaveOne (Dentsply Maillefer), Twisted File (SybronEndo, Orange, CA), Mtwo (MT; VDW, München, Germany), and Revo-S (MicroMega, Besançon, France) nickel-titanium systems and obturated with compatible gutta-percha cones of finishing files using the single-cone technique and a resin sealer.
METHODS: The study included 72 mandibular premolar teeth. The roots were covered with additive silicone and placed in Eppendorf tubes, which were filled with a self-curing acrylic. The tubes were separated into 6 groups: prepared with the ProTaper Universal (F4 40/.06) (group 1), prepared with the PTN (X4 40/.06) (group 2), prepared with the WaveOne reciprocating file (40/.08) (group 3), prepared with the Twisted File (40/.04) (group 4), prepared with the MT (40/.06) (group 5), and prepared with the Revo-S (AS 40/.06) (group 6). After the preparations were completed, all the teeth were filled with the appropriate gutta-percha systems. The force (N) was applied at a 1-mm/min crosshead speed until the roots fractured. Differences among the groups were analyzed by Tukey and analysis of variance tests.
RESULTS: Group 2 was the most resistant to fracture, and group 5 was the least resistant. The difference in the fracture resistance between the 2 groups was statistically significant (P = .019). The resistance of group 3 and group 6 to vertical root fracture was similar, and the resistance of group 4 was slightly lower than that of the other groups (P = .058).
CONCLUSIONS: The roots instrumented with the MT were the least resistant, and the roots instrumented with the PTN were the most resistant to VRF.
Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Entities:  

Keywords:  Fracture resistance; in vitro study; nickel-titanium systems; vertical root fracture

Mesh:

Substances:

Year:  2015        PMID: 26211563     DOI: 10.1016/j.joen.2015.06.002

Source DB:  PubMed          Journal:  J Endod        ISSN: 0099-2399            Impact factor:   4.171


  5 in total

1.  Shaping ability of two nickel-titanium instruments activated by continuous rotation or adaptive motion: a micro-computed tomography study.

Authors:  E Pedullà; G Plotino; N M Grande; G Avarotti; G Gambarini; E Rapisarda; F Mannocci
Journal:  Clin Oral Investig       Date:  2016-02-15       Impact factor: 3.573

2.  Effect of root canal sealers on the fracture resistance of endodontically treated teeth: a systematic review of in vitro studies.

Authors:  Emel Uzunoglu-Özyürek; Selen Küçükkaya Eren; Sevilay Karahan
Journal:  Clin Oral Investig       Date:  2018-06-27       Impact factor: 3.573

3.  Comparative Evaluation of Fracture Resistance of Endodontically Treated Bicuspids Instrumented With Hand Files, TruNatomy, ProTaper Next, ProTaper Gold, and WaveOne - An In vitro Study.

Authors:  Sulfia Nassar; Harish Kumar Shetty; Prathap M S Nair; Sree Gowri; K Jayaprakash
Journal:  J Pharm Bioallied Sci       Date:  2022-07-13

Review 4.  Does Low-Taper Root Canal Shaping Decrease the Risk of Root Fracture? A Systematic Review.

Authors:  Francesco Puleio; Giuseppe Lo Giudice; Angela Militi; Ugo Bellezza; Roberto Lo Giudice
Journal:  Dent J (Basel)       Date:  2022-06-01

5.  Vertical root fracture resistance and dentinal crack formation of root canal-treated teeth instrumented with different nickel-titanium rotary systems: an in-vitro study.

Authors:  Galvin Sim Siang Lin; Kiran Prabhakar Singbal; Tahir Yusuf Noorani; Raghavendra Penukonda
Journal:  Odontology       Date:  2021-07-16       Impact factor: 2.634

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.