Tunable water barrier properties of EVA by clay insertion?

Organo-modified Cloisite clays at varying contents were incorporated into poly(ethylene-co-vinyl acetate) (EVA) by melt blending. Nanoclay dispersion in films was first evaluated. The water transport properties were investigated by pervaporation and sorption measurements. A decrease of the water permeation flux was obtained when incorporating nanoparticles. This barrier effect is usually attributed to the increase of the diffusion pathways due to nanoclay-induced tortuosity effects. However, the diffusion coefficient was found to be dependent on water concentration, which generally reflects a plasticization effect of water. Besides, at 7 wt% of loading, an unexpected increase of water diffusivity was measured with a time-scale shift of the permeation flux. This was correlated with the formation of preferential diffusion pathways along interfacial regions due to free volumes existing between the EVA matrix and nanoclays as well as the water affinity of microfillers. As a consequence, water mass gain was found to be increased. The water-induced plasticization of sorbed water molecules was also highlighted through sorption kinetics. Eventually, some applications to these films in which water barrier behaviour is required were discussed.