Anatase TiO2 ultrathin nanobelts derived from room-temperature-synthesized titanates for fast and safe lithium storage.

Lithium-ion batteries (LIBs) are promising energy storage devices for portable electronics, electric vehicles, and power-grid applications. It is highly desirable yet challenging to develop a simple and scalable method for constructions of sustainable materials for fast and safe LIBs. Herein, we exploit a novel and scalable route to synthesize ultrathin nanobelts of anatase TiO2, which is resource abundant and is eligible for safe anodes in LIBs. The achieved ultrathin nanobelts demonstrate outstanding performances for lithium storage because of the unique nanoarchitecture and appropriate composition. Unlike conventional alkali-hydrothermal approaches to hydrogen titanates, the present room temperature alkaline-free wet chemistry strategy guarantees the ultrathin thickness for the resultant titanate nanobelts. The anatase TiO2 ultrathin nanobelts were achieved simply by a subsequent calcination in air. The synthesis route is convenient for metal decoration and also for fabricating thin films of one/three dimensional arrays on various substrates at low temperatures, in absence of any seed layers.

The drastic deplen class="Chemical">tion of traditional fossil energies and serious environmental pollutions stimulate tremendous research interests nowadays to develop sustainable energies and advanced energy-storage systems. Among various energy-storage systems, lithium-ion batteries (LIBs) are promising candidates for portable electronics, future electric vehicles/hybrid electric vehicles, and power-grid applications because of its high energy density123. The state-of-the-art anode material for LIBs, graphite, cannot fulfill the demands for large scale energy storage applications due to its poor rate performance and serious safety issues. Moreover, abundance, toxicity, synthetic methods and scalability of anode material should be considered to reduce the energy and environmental costs of LIBs3. Significant efforts have been made on Ti-based compounds, for example Li4Ti5O12 and TiO2, as anodes for LIBs because of their superior safety as well as resource abundance and non-toxicity456. The inherent overcharge protection of Ti-based compounds arises from the fact that high Li-intercalation potential avoids the lithium dendrites and formation of the solid electrolyte inerphase (SEI) film as well. Also served as important functional material in photocatalysis7, energy conversion8, and gas sensors9, TiO2 possesses a theoretical capacity of 335 mAhg−1, which is much higher than that of Li4Ti5O12 (175 mAhg−1) having been successfully commercialized. Full cells constructed with TiO2 and LiFePO4 or LiNi0.5Mn1.5O4 were reported to exhibit fascinating performances10. Among common TiO2 polymorphs of anatase, rutile, and brookite, anatase presents the most excellent properties in lithium storage11 and photocatalysis12. However, for lithium storage, anatase TiO2 still suffers from low capacity and poor rate performance because of the sluggish Li ion diffusion and poor electronic conductivity11.

Reducing the dimension to a nanometer-scale range is one of the most effecn class="Chemical">tive strategies for anatase to improve the battery performance13141516171819, because the characteristic time constant t for diffusion is proportional to the square of the diffusion length L (t ≈ LD−)20. Specifically, two-dimensional (2D) nanomaterials can provide greatly increased electrolyte/electrode contact area and effectively shorten diffusion distance of Li ions, which in turn enhances their electrochemical performances212223. For example, anatase TiO2 nanosheets with exposed highly reactive (001) facets exhibited excellent properties for lithium storage24. Ultrathin 2D nanomaterials demonstrate many unique physical and chemical properties25. As a special nanostructure, nanobelts integrate the merits of 2D nanomaterials with enhanced charge transport that is characteristic of one-dimensional (1D) configuration.

Anatase TiO2 nanobelts are typically fabricated via calcinan class="Chemical">tions of hydrogen titanate, which is prepared by an alkaline hydrothermal treatment followed by a subsequent proton exchange26272829. Utilizing titanate derived by such a multi-step procedure as intermediates, TiO2 with other 1D and 2D nanostructures could be obtained30313233343536. Recently, a vapour-phase hydrothermal method using ammonia instead of NaOH was developed for the direct growth of titanate nanotubes on a titanium substrate37. Mechanical agitation was also introduced into the alkaline hydrothermal technique to obtain elongated titanate nanotubes38. However, there are potential dangers in a high-pressure route, especially in large-scale productions, and even unfortunately, the anatase TiO2 nanobelts by alkaline hydrothermal reactions usually exhibit a large thickness and low surface area2627, which is not favored for the lithium storage. Certain low temperature techniques have been developed to synthesize titanate, including those with a nanosheet structure39; unfortunately, the sheet is still not thin enough and the specific surface area is also not high. It is still challenging to obtain TiO2 with high performance for lithium storage via a simple and scalable synthesis method.

Herein, we present the synthesis of hydrogen titanate ultrathin nanobelts via a novel and robust n class="Chemical">H2O2-asisisted wet-chemistry route at ambient conditions, as illustrated schematically in Fig. 1. An amorphous black Ti-based precursor was prepared via a rapid pyrolysis process, which, unlike common Ti-based precursor, is quite water-proof and hence easy to handle. Simply immersing the precursor in aqueous H2O2 under the ambient conditions resulted in the formation of hydrogen titanate ultrathin nanobelts. With the morphology remained stable, the hydrogen titanate can be easily converted to anatase TiO2 by a subsequent calcination at 400 oC in air. The resultant anatase nanobelts show excellent performances when utilized as anode for LIBs. The current strategy can be extended to prepare other ultrathin nanomaterials and gives hints to nanostructure design for electrode materials.

Figure 1

A schematic illustration showing the novel synthesis procedure of anatase TiO2 ultrathin nanobelts.

Firstly, an amorphous precursor was prepared via a rapid pyrolysis process. Then, room temperature treatment of the amorphous precursor with H2O2 resulted in the formation of hydrogen titanate ultrathin nanobelts. Finally, anatase TiO2 ultrathin nanobelts were obtained by a calcination of the hydrogen titanate ultrathin nanobelts.

Results

The formation of the n class="Chemical">hydrogen titanate ultrathin nanobelts is based on a dissolution/precipitation mechanism between H2O2 and the Ti-based precursor. Hydrogen peroxide is inexpensive and environmentally benign, as the only degradation product of which is water. It is noted that many titanium precursors have been dissolved in aqueous H2O2 solution to produce certain peroxo complexes4041; however, synthesis of nanobelts in the presence of H2O2 has not been reported yet42, let alone that of ultrathin nanobelts. Moreover, most titanium precursors, such as titanium alkoxides and titanium halides, are highly susceptible to water or even moisture. Once contacted with water, rapid hydrolysis occurs on the surface and TiO2 is precipitated in the form of spherical nanoparticles rather than that of 1D or 2D nanostructures. Thus, a key technical issue herein is to explore a Ti-based precursor which does not hydrolyze in water.

In current investigan class="Chemical">tion, the black precursor achieved by the rapid pyrolysis is amorphous (Fig. 2a and Inset in Fig. 2b) and has a compact bulky morphology (Fig. 2b and Supplementary Fig. 1a), which remains almost unchanged after being immersed in water, either at ambient condition (Supplementary Fig. 1b) or at 160 oC in a hydrothermal condition (Supplementary Fig. 1c), demonstrating its excellent stability in water. This water-stable feature is very important for a convenient and safe usage and storage in practice. The precursor contains uniformly distributed Ti, O, N, C, and S elements (Fig. 2c). The mass fraction of C, N, and H measured by an element analysis (Flash EA 1112, ThermoFinnigan) is 25.2%, 15.4%, and 2.8%, respectively. The precursor mainly contains Ti-O, O-H, C–C, C–N, N-H, O = C–O, Ti-S-O, and SO42− species (Supplementary Fig. 2 and Supplementary Fig. 3). After the reaction with H2O2 at ambient conditions, the precursor was converted to hydrogen titanate ultrathin nanobelts. Hydrogen titanates tend to form 2D morphologies because of their inherent lamellar structure. The room temperature synthesis further guarantees an ultrathin thickness of the titanate. Contrast to low yield of dominant liquid exfoliation route for preparation of ultrathin layered materials25, the precursor completely converts to hydrogen titanate ultrathin nanobelts in the present synthesis strategy. When compared with hydrothermal/solvothermal reactions widely adopted for the synthesis of most titanate nanostructures, the present route is energy-efficient as it demands no heating or external mechanical activations. The pyrolysis procedure for the precursor preparation is simple and rapid. The main external thermal energy input is for dehydration, which is the most time-consuming procedure. The pyrolysis process that finally achieved the black precursor is completed within just 2 min.

Figure 2

Characterization of precursor and titanate ultrathin nanobelts.

(a) XRD pattern, (b) TEM image (inset: HRTEM image), and (c) EDS mapping of the precursor. (d) XRD pattern, (e) STEM image, (f, g) TEM images, and (h) HRTEM image of the as-prepared titanate ultrathin nanobelts. (i) Optical photograph of a bamboo leaf. (j) Nitrogen adsorption-desorption isotherm of the as-prepared titanate ultrathin nanobelts (inset: pore-size distribution calculated by BJH method from the desorption branch).

The phase and lamellar structures of the titanate were characterized by X-ray diffracn class="Chemical">tion (XRD). All the diffraction peaks of the as-prepared sample (Fig. 2d) can be indexed to orthorhombic hydrogen titanate (H2Ti2O5.H2O, JCPDS card 47–0124). The broadening of the reflection peaks indicates small grains in the as-prepared titanate. The strong Bragg peak at 2θ = 8.5o corresponds to the lamellar structure with an interlayer distance of ca. 1 nm. This interlayer distance is larger than that of hydrogen titanate (H2Ti2O5.H2O), which may be attributed to the intercalation of nitrogen species and ammonium ions (Supplementary Fig. 4)37.

The as-prepared titanate exhibits a 1D-like architn class="Chemical">ecture with abundant pores, as shown in the scanning transmission electron microscopy (STEM, Fig. 2e) and transmission electron microscopy (TEM, Fig. 2f) images. A closer observation reveals the nanobelt with a sharp tip (Fig. 2g,h), which looks like a bamboo leaf as a whole (Fig. 2i). The tips are curved and the edges are rolled up (Fig. 2e–h) because of the surface tension, which is commonly observed in graphene4344. This suggests the ultrathin and flexible characteristics for the present titanate nanobelts. Many single-layered hydrogen titanates with a thickness of ca. 1 nm can be observed in Fig. 2g,h, which is in accordance with the XRD result. Some stacking nanobelts are also observed (Supplementary Fig. 5). The thickness of most nanobelts is estimated to be 1– 2nm (Fig. 2g,h, and Supplementary Fig. 5). The nanobelts sway, gather, shrink, and thicken under electron beam irradiation during TEM observations, which can be attributed to its ultrathin and flexible features and the instability of hydrogen titanate under the electron beam. It is previously observed that hydrogen titanate decomposed easily to anatase under focused electron beam irradiation45. This can explain the inconsistency that the titanate is crystallized as revealed by XRD (Fig. 2d) but shows no crystals in TEM observations (Fig. 2g,h). The titanate nanobelts possess a high specific surface area of 193 cm3g−1 and large total pore volume of 0.949 cm3g−1 (Fig. 2j). It is worth mentioning that the ultrathin nanobelts can be obtained in a wide range of H2O2 amount (20–800 mL for one gram of precursor, Supplementary Fig. 6), which indicates a high reliability of the present synthesis strategy. The increased and then decreased Ti(IV) concentration in the solution (Supplementary Fig. 7) confirms a dissolution/precipitation mechanism for the formation of titanate nanobelts when immersing the black titanium-based precursor in aqueous H2O2 solution.

Phase-pure anatase TiO2, as verified by the XRD pattern (Fig. 3a) and Raman spn class="Chemical">ectrum (Fig. 3b), can be obtained by a subsequent calcination of the as-prepared titanate in air, with the ultrathin nanobelts architecture well reserved (Fig. 3c–e). The transition temperature (400 oC) from titanate to anatase here is lower than that of titanate obtained by hydrothermal reactions followed by a subsequent proton-exchange procedure2627282930. Gentili et al. argued that a lower Na/Ti ratio in titanates was in favor of its transition to anatase46. Thus, the relatively low transition temperature could be attributed to the sodium-free feature for the titanate achieved in the current investigation. The high-resolution TEM (HRTEM) image of a nanobelt (Fig. 3f) exhibits a recognizable lattice spacing of 0.35 nm, corresponding to the (101) atomic plane of anatase TiO2. The selected area electron diffraction (SAED) pattern (Inset in Fig. 3f) further confirms that the nanobelt is in anatase polycrystalline. The thickness of anatase nanobelts is typically below 5 nm (Fig. 3e), slightly larger than that of the as-synthesized titanate because of the phase transition and grain growth during the calcination in air. The specific surface area and total pore volume of the anatase TiO2 nanobelts is determined to be 119 m2g−1 and 0.666 cm3g−1 (Fig. 3g), respectively.

Figure 3

Characterization of anatase TiO2 ultrathin nanobelts.

(a) XRD pattern. (b) Raman spectrum. (c) SEM image. (d,e) TEM images. (f) HRTEM image (inset: SAED pattern). (g) Nitrogen adsorption-desorption isotherm (inset: pore-size distribution calculated by BJH method from the desorption branch).

The electrochemical performance of the anatase n class="Chemical">TiO2 ultrathin nanobelts was evaluated in coin type lithium half-cells using Li foil as counter electrode and reference electrode at the room temperature. Based on the shape, the discharge curve of the TiO2 nanobelts (Fig. 4a) can be divided into three regions46: i) a voltage drop from the open circuit voltage to ca. 1.75 V, which is related to the formation of the solid–solution LiTiO2; ii) a voltage plateau at ca. 1.75 V, which indicates a phase equilibrium between the anorthorhombic Li0.5TiO2 phase and the Li-poor tetragonal LiTiO2 phase; iii) a sloped region from 1.75 V to 1.0 V, which is attributed to the Li-ion insertion process into the surface layer of nano-sized TiO2 under the external force of the electric field. The high operating potential enables the batteries to be charged at high rates with high safety. The reaction in a TiO2/Li half-cell is proposed to be,

Figure 4

Electrochemical measurements of the anatase TiO2 ultrathin nanobelts and commercial P25 TiO2 nanoparticles.

(a) The second discharge-charge profiles at the current rate of 1 C. (b) Cycling performance at 1 C. (c) Rate performance (inset: SEM image of the electrode after rate performance test). (d) Electrochemical impedance spectra measured in the open circuit potential over the frequency range from 100 kHz to 0.01 Hz (insets: enlarged view of the semicircle regions and the equivalent circuit), the specimens are those after the rate performance testing as illustrated in (c). The fitting results are represented by the solid lines.

Here, the maximum insertion coefficient x is determined to be only ~0.5 (corresponding to a capacity of 167.5 mAhg−1) in bulk n class="Chemical">TiO2 due to the strong repulsive force between Li ions when the insertion ratio is greater than 0.5 [Refs 24,47]. Both theoretical simulations and experimental results demonstrated that the theoretical capacity of titania-based electrodes can be dramatically improved when certain nanostructures were employed5611. The nanobelts exhibit an enhanced specific capacity at 1 C (170 mAg−1) from 171 to 197 mAhg−1 when compared with Degussa P25, (a benchmark TiO2 nanoparticles) in the second cycle, as shown in Fig. 4a,b. Moreover, the nanobelts demonstrate an excellent cycling stability (Fig. 4b), which is much better than that of P25. The irreversible capacity in the 1st cycle is assigned to the non-reversible Li intercalation or the reaction between the electrolyte and the anatase surface13141516171819, which is common for most anode materials, especially for nanostructured materials. Fortunately, the irreversible capacity loss in the first cycle can be effectively and conveniently mitigated by a butyllithium (C2H5OLi) treatment, or nano-sized Li powder incorporation4849. After 5 cycles, the columbic efficiency kept a stable value of over 99.5%, suggesting a highly reversible electrochemical reaction.

As shown in Fig. 4c, the anatase TiO2 ultrathin nanobelts deliver a discharge capacity of ca. 216, 204, 186, 164, 146, 126, and 116 mAhg−1 at a current rate of 0.5 C, 1 C, 2 C, 5 C, 10 C, 20 C, and 30 C, respn class="Chemical">ectively. When the current is returned to 0.5 C, the anatase TiO2 ultrathin nanobelts resumes its capacity of 204 mAhg−1 after 80 cycles at different current densities, suggesting its excellent rate performance and good cycling stability. On the contrary, the P25 only displays 151, 112, 90, 65, 46, 33, and 27 mAhg−1 at 0.5 C, 1 C, 2 C, 5 C, 10 C, 20 C, and 30 C, respectively, which is much lower than that of the anatase TiO2 ultrathin nanobelts. It took only 2 min at 30 C to charge the nanobelts to 116 mAhg−1 while charging the P25 to 112 mAhg−1 took a much longer time of 1 h at 1 C (Fig. 4c). At 30 C, the nanobelts illustrate a 330% capacity improvement over the P25 (Fig. 4c). The electrochemical performance of anatase TiO2 ultrathin nanobelts is not only better than TiO2 nanobelts obtained by a common alkaline hydrothermal route5051 but also better than most of high performance TiO2 anodes17192452535455565758. The high electrochemical activity and low-cost preparation make the TiO2 ultrathin nanobelts a promising anode material for high performance and safe LIBs.

Discussion

The excellent electrochemical performance is mainly ascribed to its unique nanostructure: a) the n class="Chemical">ultrathin thickness greatly shortens the diffusion distance of Li ions and the 1D-like structure possesses facile charge transport along the longitudinal dimension; b) the porous structure allows efficient ingress and infiltration of the electrolyte into the electrode, enabling a rapid ion transport, and provides abundant electrolyte/electrode contact area for charge transfer; c) the porous and flexible nanostructure effectively accommodates the volume/strain changes during the charge-discharge process. After the rate performance test for 80 cycles, the original ultrathin nanobelt structures can be well-retained (Inset in Fig. 4c), demonstrating the structure stability during charge-discharge cycles. The special composition of the nanobelts may also contribute to the excellent electrochemical performance. The X-ray photoelectron spectrum (XPS) N 1s signal ranging from 398 to 402 eV (Supplementary Fig. 8a) on the surface of the TiO2 nanobelts can be attributed to major interstitial nitrogen (Ninter) and minor chemically adsorbed nitrogen (Nad) species59. The S 2p peak at 168.4 eV (Supplementary Fig. 8b) is assigned to sulfur species in SO42− formed on the TiO2 nanobelts surface59. The N and S are in-situ doped to TiO2 nanobelts from the N-/S-containing precursor, resulting in a pale yellow color and an enhanced visible light absorption of the TiO2 nanobelts (Supplementary Fig. 9). Recently, Jiao et al. reported that N and S co-doping could improve lithium storage capability of TiO259. The exact effect of surface species and crystal defects on lithium storage performance of the present TiO2 nanobelts requires further investigations. Nevertheless, the nanobelts indeed show obviously enhanced charge transfer when compared with that of P25. In the electrochemical impedance spectroscopy (EIS) spectra illustrated in Fig. 4d, the intercept on Zreal axis in the high frequency region represents the resistance of electrolyte60. The depressed semicircle in the high-medium frequency region is assigned to the charge transfer process. The straight line at a lower frequency region represents the typical Warburg behavior, which is associated with the diffusion of Li ions in the electrodes. The impedance spectra are fitted to the proposed equivalent circuit (Inset in Fig. 4d), in which the equivalent circuit, Re, Rct, Zw, CPEdl, and Cint represent the electrolyte resistance, the charge-transfer resistance, the Warburg impedance, the double-layer capacitance, and the intercalation capacitance, respectively6162. The Re of nanobelts and P25 is determined to be ca. 2.8 Ω and 1.9 Ω, respectively. The Rct of nanobelts and P25 is determined to be ca. 10.5 Ω and 33.0 Ω, respectively. Although the electrolyte resistance of nanobelts is slightly larger than that of P25, the nanobelts show much smaller charge transfer resistance (Rct) than that of P25. The nanobelts have larger slopes and shorter lines in the low frequency region, implying a faster Li+ diffusion rates and smaller variation of diffusion paths63. Thus, the small charge-transfer resistance on the electrode/electrolyte interface and fast Li+ diffusion contribute to the excellent electrochemical performance of the ultrathin nanobelts62.

Interestingly, the synthesis strategy described here is capable of construcn class="Chemical">ting titanate nanobelt arrays (Fig. 5a,b) and branched core-shell arrays (Fig. 5c–f, namely ultrathin nanobelts deposited on anatase TiO2 nanowire or nanobelt arrays) on various plane and complex substrates without the assistance of any seed layers. TiO2 arrays with various 1D/3D nanostructures have potential applications in regions of solar energy conversion, energy storage, and wettability control646566. It is noted that the growth of nanostructured hydrogen titanate arrays via alkaline hydrothermal route is always limited to metallic Ti substrates32, or other substrates with a Ti coating35. Moreover, composition decoration can be conveniently achieved by this method (Supplementary Figs. 9–14), which may exhibit enhanced properties in lithium storage67 and photoelectrochemical water splitting6869.

Figure 5

Characterization of titanate array films.

(a) Top view and (b) cross sectional SEM images of titanate arrays precipitated on glass substrates. (c,d) SEM images of the core-shell branched nanowire arrays. (e,f) SEM images of the core-shell branched nanobelt arrays.

In summary, hydrogen titanate ultrathin nanobelts were synthesized on a large scale at room temperature by a facile strategy based on a n class="Chemical">H2O2-asisted dissolution/precipitation process, with an appropriately designed water-proof Ti-based precursor. Anatase TiO2 can be obtained by a calcination of the as-synthesized titanate at a relatively low temperature of 400 oC in air, with the ultrathin nanobelts architecture well-reserved. The unique nanostructures and appropriate composition endowed the anatase TiO2 nanobelts excellent performances in lithium storage. The high electrochemical activity and low-cost preparation make the TiO2 ultrathin nanobelts a promising anode material for fast and safe LIBs. This synthesis route is also convenient for metal decoration, as well as constructions of 1D/3D TiO2 arrays on arbitrary substrates. The current strategy can be extended to prepare other ultrathin metal oxides, which may find wide applications in regions of catalysis, energy conversion, and energy storage.

Methods

Synthesis

All regents were of analytical grade and used as rn class="Chemical">eceived without further purifications. 1.75 g glycine (C2H5NO2), 1.25 g titanium oxysulfate-sulfuric acid hydrate (Aladdin), and 0.6 mL nitric acid (65 wt. %) were added in 10 mL deionized water in a 100 mL crucible, which was transferred to a preheated furnace maintained at 400 °C for ca. 15 min to obtain a black precursor after ultrasounded for 10 min and stirred for 1 h. 0.5 g black precursor was then added into 400 mL H2O2 (30 wt. %) and stored at room temperature for 72 h to obtain hydrogen titanates, which were converted to anatase TiO2 counterparts after calcination in air at 400 oC for 1 h with a heating rate of 1 oC min−1.

Characterizations

X-ray diffraction (XRD) measurements were conducted on a XRD-6000 diffractometer (SHIMADZU) with a Cu Kα radian class="Chemical">tion, operated at 40 kV, 40 mA (λ = 0.15406 nm). The powder morphology was observed using a field emission scanning electron microscopy (FE-SEM, Hitachi S-4800, Tokyo, Japan, with EDS capabilities), together with a transmission electron microscopy (TEM, FEI-F20, FEI, USA) working at 200 kV. The X-ray photoelectron spectra (XPS) characterization was carried out on an Escalab 250Xi system (Thermo Fisher Scientific). The binding energy (BE) was calibrated by using the containment carbon (C 1 s = 284.6 eV). The Raman spectra were taken on a LabRamHRUV (JDbin-yvon) Raman spectrometer, using the 514 nm line as the excitation source. The Brunauer-Emmett-Teller (BET) approach using adsorption data was utilized to determine the specific surface area. The sample was degassed at 150 °C for 14 h to remove physisorbed gases prior to the measurement. Titanium concentrations of the reaction solution sampled at various time intervals were measured by ICP-MS (XSENIES).

Lithium storage test

The working electrodes were prepared by a slurry coan class="Chemical">ting procedure. The slurry consisted of 70 wt. % TiO2 powders, 20 wt. % acetylene black, and 10 wt. % polyvinylidene fluoride (PVDF) dispersed in N-methyl pyrrolidinone (NMP), and was coated on a copper foil, which acted as a current collector. The film was dried at 90 °C for 20 h in vacuum. The cells were assembled in an argon-filled glove box using Li foil as a counter electrode and polypropylene (PP) film (Celgard 2300) as a separator. The electrolyte was 1 M LiPF6 in a 50:50 (w/w) mixture of ethylene carbonate (EC) and diethyl carbonate (DEC). The charge-discharge tests were conducted on a LAND 2001A system. The electrochemical impedance spectroscopy (EIS) measurements were performed on a CHI660D electrochemical workstation.

Additional Information

How to cite this article: Wen, W. et al. Anatase n class="Chemical">TiO2 ultrathin nanobelts derived from room-temperature-synthesized titanates for fast and safe lithium storage. Sci. Rep. 5, 11804; doi: 10.1038/srep11804 (2015).