Effects of Particle Filters and Selective Catalytic Reduction on Heavy-Duty Diesel Drayage Truck Emissions at the Port of Oakland.

Effects of fleet modernization and use of diesel particle filters (DPF) and selective catalytic reduction (SCR) on heavy-duty diesel truck emissions were studied at the Port of Oakland in California. Nitrogen oxides (NOx), black carbon (BC), particle number (PN), and size distributions were measured in the exhaust plumes of ∼1400 drayage trucks. Average NOx, BC, and PN emission factors for newer engines (2010-2013 model years) equipped with both DPF and SCR were 69 ± 15%, 92 ± 32%, and 66 ± 35% lower, respectively, than 2004-2006 engines without these technologies. Intentional oxidation of NO to NO2 for DPF regeneration increased tailpipe NO2 emissions, especially from older (1994-2006) engines with retrofit DPFs. Increased deployment of advanced controls has further skewed emission factor distributions; a small number of trucks emit a disproportionately large fraction of total BC and NOx. The fraction of DPF-equipped drayage trucks increased from 2 to 99% and the median engine age decreased from 11 to 6 years between 2009 and 2013. Over this period, fleet-average BC and NOx emission factors decreased by 76 ± 22% and 53 ± 8%, respectively. Emission changes occurred rapidly compared to what would have been observed due to natural (i.e., unforced) turnover of the Port truck fleet. These results provide a preview of more widespread emission changes expected statewide and nationally in the coming years.