| Literature DB >> 26045968 |
Jenica Su-Ern Yong1, De-Yun Wang1.
Abstract
Hearing plays a vital role in the performance of a soldier and is important for speech processing. Noise-induced hearing loss is a significant impairment in the military and can affect combat performance. Military personnel are constantly exposed to high levels of noise and it is not surprising that noise induced hearing loss and tinnitus remain the second most prevalent service-connected disabilities. Much of the noise experienced by military personnel exceeds that of maximum protection achievable with double hearing protection. Unfortunately, unlike civilian personnel, military personnel have little option but to remain in noisy environments in order to complete specific tasks and missions. Use of hearing protection devices and follow-up audiological tests have become the mainstay of prevention of noise-induced hearing loss. This review focuses on sources of noise within the military, pathophysiology and management of patients with noise induced hearing loss.Entities:
Keywords: Ear protective devices; Hearing loss; Military personnel; Noise-induced
Year: 2015 PMID: 26045968 PMCID: PMC4455974 DOI: 10.1186/s40779-015-0034-5
Source DB: PubMed Journal: Mil Med Res ISSN: 2054-9369
Glossary of terms used
|
|
|
|---|---|
|
| Sound intensity is expresses the pressure caused by a sound wave and is indicated by sound pressure level. The unit of measurement is the decibel (dB SPL) |
|
| A logarithmic scale to measure sound pressure level |
|
| To measure noise, A-weighted SPL (dBA) can be used. In contrast to SPL which represents a physical dimension, A-weighted SPL represents a perceptual dimension. The dB SPL will be different from dBA for different for different frequencies as low frequency sounds and high frequency sounds tend to be less loud than mid-frequency sounds |
|
| This refers to the average level of sound pressure within a certain time period with the A-filter used for frequency weighting. The A-filter is a frequency-weighting of sound pressure levels that mimics the sensitivity of the auditory system of humans (eg, low-frequency sounds contribute little to the A-weighted dB level) |
Amount of permissible noise exposure allowed in theworkplace*
|
|
|
|---|---|
| 8 | 90 |
| 6 | 92 |
| 4 | 95 |
| 3 | 97 |
| 2 | 100 |
| 1 ½ | 102 |
| 1 | 105 |
| ½ | 110 |
| ¼ or less | 115 |
*Adapted from OSHA 2014. Standards. US Dept Labor: Occupational Noise Exposure [Online]. vailable by Occupational Safety and Health Administration. https://www.osha.gov/SLTC/noisehearingconservation/index.html.
Peak sound pressure level range of different weapons*
|
|
|
|---|---|
|
| |
| .45-70 Rifle | 155.2-159.9 |
| .30-06 Rifle | 158.7-163.1 |
|
| |
| .410 Bore | 151.0- 157.3 |
| 20 Gauge | 154.8 |
| 12 Gauge | 156.1- 161.5 |
|
| |
| .22 | 151 |
| 9 mm Luger | 159 163 |
| .45 ACP | 158 |
|
| |
| Hand grenade | 158 |
| Light anti-tank weapon | 184 |
| Inside armored vehicle, continuous noise | LAeq103 – 107 |
*Adapted from Chen L, Brueck SE. Noise and lead exposure at an outdoor firing range – California. Health Hazard Evaluation report Sept 2011, and from Kramer WL. Gunfire noise and hearing. American Tinnitus Association. June 2002:14–15.