Mechanical competence of ovariectomy-induced compromised bone after single or combined treatment with high-frequency loading and bisphosphonates.

Osteoporosis leads to increased bone fragility, thus effective approaches enhancing bone strength are needed. Hence, this study investigated the effect of single or combined application of high-frequency (HF) loading through whole body vibration (WBV) and alendronate (ALN) on the mechanical competence of ovariectomy-induced osteoporotic bone. Thirty-four female Wistar rats were ovariectomized (OVX) or sham-operated (shOVX) and divided into five groups: shOVX, OVX-shWBV, OVX-WBV, ALN-shWBV and ALN-WBV. (Sham)WBV loading was applied for 10 min/day (130 to 150 Hz at 0.3g) for 14 days and ALN at 2 mg/kg/dose was administered 3x/week. Finite element analysis based on micro-CT was employed to assess bone biomechanical properties, relative to bone micro-structural parameters. HF loading application to OVX resulted in an enlarged cortex, but it was not able to improve the biomechanical properties. ALN prevented trabecular bone deterioration and increased bone stiffness and bone strength of OVX bone. Finally, the combination of ALN with HF resulted in an increased cortical thickness in OVX rats when compared to single treatments. Compared to HF loading, ALN treatment is preferred for improving the compromised mechanical competence of OVX bone. In addition, the association of ALN with HF loading results in an additive effect on the cortical thickness.

<span class="Disease">Osteoporosis is a <al">span class="Disease">skeletal disease characterized by low bone mass and micro-architectural deterioration of the bone tissue, leading to decreased bone strength predisposing increased risk of fractures1. This disease is associated with estrogen deficiency after menopause, which is responsible for shifting the balance between bone resorption and bone formation toward an increased level of bone resorption23. With an increasing aging population worldwide, osteoporosis has become a growing health concern, since the augmented risk of bone fractures has devastating outcomes in terms of mortality, decreased autonomy and healthcare costs4. Thus, therapies that increase the bone mechanical competence in medical compromised conditions are required.

The current therapies to prevent <span class="Disease">bone loss in estrogen-deficient state are via drugs that affect bone metabolism, such as <al">span class="Chemical">biphosphonates (BPs). The biphosphonate drug alendronate is a potent anti-resorptive agent5, with evidenced reduction of fracture risk in postmenopausal women6. However, it has some limitations and side effects that affect long-term administration and patient’s adherence789. Alternatively to the pharmacological treatment with BPs, biomechanical therapies have been proposed to treat osteoporosis due the profound anabolic effects of mechanical loading on bone10. In particular, the application of high-frequency (HF) loading via whole body vibration (WBV) has been shown to promote bone formation, and even recover bone loss arising from osteoporotic conditions1112.

The anti-<span class="Disease">fracture efficacy of these <al">span class="Disease">osteoporosis therapies was assessed in previous studies by using dual energy X-ray absorptiometry (DXA) based on bone mineral density (BMD)1314. However, DXA-BMD is not an appropriate predictor for the strength of the bone because of the poor association between BMD change and bone fragility15. As the method is based on a two-dimensional projection measurement of the three-dimensional bone structure, it lacks the ability to explore macro- and micro-architectural features of the bone16. Thus, fracture risk cannot be directly inferred from BMD, and surrogates for assessment of bone mechanical competence that consider bone geometric aspects are needed.

In this context, finite element (FE) analysis provides an approach to assess bone biomechanical properties1718, particularly when combined with specimen-specific high-resolution data obtained from micro-computed tomography, from which the bone micro-architecture can be easily obtained19. Therefore, the aims of the present study were: (i) to investigate the effect of single or combined application of HF <span class="Chemical">WBV and <al">span class="Chemical">ALN on the mechanical competence of bone originating from osteoporotic animals; and (ii) to determine how the changes in trabecular and cortical bone micro-structure after these interventions contribute to the bone biomechanical properties.

Methods

Animals and experimental design

The protocol of the animal experiment was approved by the local ethical committee (P050/2011), complied with ARRIVE guidelines20 for preclinical studies and was performed according to the Belgian animal welfare regulations and guidelines.

A total of 34 female <span class="Species">Wistar rats at 12 weeks of age were used in the present study. Twenty-seven animals underwent ovariectomy surgery [OVX], while the remaining seven animals were subjected to sham-ovariectomy surgery [shOVX]. (Sham)-ovariectomy surgery was performed at Charles River Labo<al">span class="Species">ratories (Charles River, L’ Arbresle, France). For the rats subjected to sham surgery, the bilateral ovaries were lifted up and returned to their original position, while for the ovariectomized rats, the ovaries were removed. Rats arrived 5 days post-(sham)OVX surgery, with a body weight ranging between 220 g and 250 g. Pair-feeding regimen was initiated immediately in an attempt to control the body weight changes throughout the study. The average daily food consumption of the shOVX animals was determined, and the quantified amount was then provided to the other animals. Animals were weighed at the start and once a week during the study. The OVX group was divided into 2 groups, an untreated group [OVX] (n = 13) and a group treated with the anti-resorptive bisphosphonate drug alendronate [ALN] (n = 14). Alendronate sodium trihydrate (A4978-100MG, Sigma-Aldrich, Bornem, Belgium) was injected subcutaneously 3 days/week at a dose of 2 mg/kg body weight/dose, starting 5 days post-OVX surgery21. Saline administration (0.9% NaCl) was performed according to the same time schedule to the rats of the OVX and shOVX groups. Injections were administered till the day of euthanasia (i.e. 14 days after starting the mechanical stimulation). The animals of OVX and ALN groups were further divided into subgroups relative to the loading condition (sham-WBV versus WBV), resulting in 4 experimental groups (OVX-shWBV, n = 7; OVX-WBV, n = 6; ALN-shWBV, n = 6; ALN-WBV, n = 8). The 5th group, namely the shOVX group (n = 7), did not receive mechanical stimulation, and served as a negative control to illustrate normal bone characteristics over the course of the experiment. The OVX-shWBV group served as positive control to demonstrate the changes occuring during the development of osteoporotic condition following ovariectomy.

Vibration device and loading protocol

HF mechanical loading was initiated 6 weeks <span class="Chemical">post-(sham)ovariectomy. This time lapse was considered to be adequate for inducing significant bone changes in the <al">span class="Species">rat long bones in response to ovariectomy12. The loading was applied by means of WBV via a custom-made vibration device. The WBV loading was administered during 14 days for 10 minutes/day according to a protocol that consisted of 10 consecutive frequency steps (130, 135, 140, 145, 150, 130, 135, 140, 145 and 150 Hz), each of these applied for 1 minute at an acceleration of 0.3g21. WBV was applied to the animals individually, taking into account the animal’s body weight. Intervals of 24-hours between the loading sessions were respected.

Specimen preparation and micro-X-ray computed tomography analysis

After euthanasia of the animals by cervical displacement under <span class="Chemical">isoflurane-induced anaesthesia, the hindlimbs were excised and the surrounding soft tissues removed. The tibiae were retrieved and immediately fixated in 10% CaCO3–buffered formalin solution (pH 7.4) at 4 °C for 48 h. The samples were further kept in the 70% <al">span class="Chemical">ethanol at 4 °C until the day of μCT scanning.

For assessment of the bone micro-architecture in the experimental groups, the proximal part of the tibiae was examined ex vivo using a desktop μCT system, commercially available as Skyscan 1172 (Bruker, Kontich, Belgium). During scanning, the tibia was placed in the <span class="Chemical">polyethylene tube and immobilized inside the tubes by means of soft modeling clay. The bone samples were scanned along the mid-sagittal planes in the mid-diaphyseal regions to obtain the μCT images. The scanning parameters were 6 μm pixel size, 50 kV X-ray voltage, 200 μA electric current and 0.5 mm Al filter.

Subsequently, the reconstructed 3D data sets were quantified using CTAn automated image analysis system (Bruker, Kontich, Belgium). For this, the volume of interest (VOI) for both trabecular and cortical analyses was defined in axial direction by using the growth plate as reference. The VOI started at a distance of 4.2 mm distally from the growth plate and extended towards the diaphysis for 1.5 mm (250 slices) (Fig. 1a). In each transverse slice of the VOI, the ROI was delineated manually matching with the area occupied by trabecular (Fig. 1b) or cortical bone (Fig. 1c) to perform trabecular or cortical bone analysis, respectively.

Figure 1

Representative μCT images of rat tibia. (a) VOI selected for trabecular and cortical bone analysis: 4.2 mm distally from the growth plate level and extending towards the distal diaphysis over a distance of 1.5 mm; (b) 3D view of trabecular (b) and cortical bone (c) volume reconstructed from the selected ROI.

For trabecular bone analysis, the bone volume (BV), bone volume fraction (BV/TV), trabecular thickness (Tb.Th), trabecular sepa<span class="Species">ration (Tb.<al">span class="Chemical">Sp) and trabecular number (Tb.N) were calculated 3D as measurements of trabecular bone mass and its distribution. The trabecular architecture was quantified by calculating the connectivity of the trabecular network (trabecular bone pattern formation, TBPf) and structure model index (SMI). For cortical bone analysis, the periosteal perimeter (Ps.Pm), medullary area (Ma.Ar), endocortical perimeter (Ec.Pm) and mean polar moment of inertia (MMI) were calculated in 2D as measurements of cortical bone mass and its distribution. The porosity (Ct.Po) and cortical thickness (Ct.Th) were calculated 3D as measurements of cortical bone mass and its distribution according to standard procedures22.

Structural analysis

Finite element models of all bone samples were created by a direct conversion of bone voxels to cubic hexahedral elements23. The three-dimensional (3D) models of bone presented a fixed length in z-direction (3.0 mm) that corres<span class="Chemical">ponded to the VOI evaluated in the μCT analysis (Fig. 2). These models consisted of 3.8 to 6.4 million elements, having between 12.2 and 21.7 million degrees of freedom. Linear and isotropic material behavior was assumed. Material properties were applied, using typical values for bone (Young’s modulus, E = 10 GPa and <al">span class="Chemical">Poisson’s ratio, ν = 0.3). Identical material properties were used for all groups, thereby enabling to isolate the effects of micro-architectural differences on bone stiffness and bone strength. Boundary conditions that represented uniaxial compression tests were defined in order to determine the bone mechanical competence. The nodes at the top surface of samples were displaced in axial direction by 1% of total height. Since all models had the same z-extent, 1% of strain in z-direction corresponds to a standard z-displacement of 0.03 mm. All nodes at the bottom of the models were restrained in the direction of the loading, except for two nodes that were restricted in the transversal plane too, in order to prevent rigid body rotation and translations.

Figure 2

Representative three-dimensional models of the tibial diaphysis for each group (shOVX, OVX-shWBV, OVX-WBV, ALN-shWBV and ALN-WBV) used in μFE analysis.

For the solution of these models with up to 20 million degrees of freedom, a parallel linear finite element package (ParFE) with an algebraic multigrid preconditioner was used24. All the calculations were performed at the National Supercomputing Center (CSCS, ETH Zürich, Switzerland), where the code was run on up to 3072 cores of a CRAY XT5™. The latter device consists of 3688 <span class="Disease">AMD hexa-core Opteron processors clocked at 2.4 GHz and a high-al">speed interconnect with a bandwidth of 9.6 GB/s and a latency of 5 μs. Numerical <al">span class="Chemical">post-processing was done on a Sun Fire™ system; for visualization, the parallel open source program ParaView25 was used, running on an HP-XC cluster. Bone stiffness [N/mm] was determined from the FE model as the slope of the linear force–displacement relationship obtained up to 1% apparent compressive strain. Bone strength was determined as the minimum force required for 2% of the voxels (representing 2% of total bone volume) reaching at least 0.7% effective strain2627.

Statistical analysis

Results of the bone micro-structural and biomechanical parameters were expressed as means ± standard deviation (SD). The differences between the means for the experimental groups were compared using one-way analysis of variance (ANOVA). Multiple comparisons between the groups were performed using Scott–Knott method and differences were considered significant at p < 0.05.

Results

Rats body weight

The body weight recordings at the day of arrival of the animals (i.e. 5 days <span class="Chemical">post-(sh)OVX surgery) revealed a slightly higher body weight for OVX and <al">span class="Chemical">ALN animals compared to shOVX animals (246.2 ± 14.6 g for OVX, 241.1 ± 13.9 g for ALN and 230.9 ± 14.1 g for shOVX). As a consequence of ovariectomy surgery, the animals from OVX and ALN group indeed have the tendency to gain weight compared to shOVX group, despite of the pair-feeding regime (272.5 ± 17.7 g for OVX, 268.7 ± 18.9 g for ALN and 233.0 ± 12.8 g for shOVX). However, HF WBV application did not affect the rats’ body weight changes in all experimental groups.

ANOVA results

ANOVA revealed a statistically significant difference between the groups (shOVX, <span class="Chemical">OVX-shWBV, OVX-<al">span class="Chemical">WBV, ALN-shWBV, ALN-WBV) for bone stiffness (p = 0.000), bone strength (p = 0.000), trabecular micro-structural parameters (BV, p = 0.000; BV/TV, p = 0.000; Tb.Th, p = 0.014; Tb.SP, p = 0.000; Tb.N, p = 0.000; TBPf, p = 0.000; SMI, p = 0.000) and cortical micro-structural parameters (Ct.Th, p = 0.001; Ct.Po, p = 0.011; Ps.Pm, p = 0.004; Ma.Ar, p = 0.012; and MMI, p = 0.001), except for Ec.Pm (p = 0.056). The results of the multiple comparions between all experimental groups for each biomechanical and micro-structural parameter are shown in Tables 1 and 2.

Table 1

Results for bone stiffness, bone strength and trabecular bone micro-structural parameters (BV, BV/TV, Tb.Th, Tb.Sp, Tb.N, TBPf, SMI) for each group evaluated.

	Mean ± Standard Deviation
Groups	Stiffness (N/mm)	Strength (N)	BV (μm3)	BV/TV (%)	Tb.Th (μm)	Tb.Sp (μm)	Tb.N (1/mm)	TBPf (1/mm)	SMI
shOVX	68280.0 ± 1571.6b	1042.6 ± 32.1b	1.9E+09 ± 2.2E+08b	27.5 ± 2.5b	66.1 ± 4.5	189.6 ± 8.0b	4.0 ± 0b	3.0 ± 3.0b	0.9 ± 0.3b
OVX-shWBV	60974.0 ± 3311.8a	934.2 ± 59.0a	9.0E+08 ± 3.1E+08a	10.0 ± 4.7a	64.6 ± 2.7	499.4 ± 231.3a	1.0 ± 1.0a	17.0 ± 4.0a	2.2 ± 0.3a
OVX-WBV	58399.9 ± 3989.2a	900.1 ± 63.5a	5.3E+08 ± 2.2E+08a	7.8 ± 3.1a	65.0 ± 5.4	636.6 ± 250.4a	1.0 ± 1.0a	21.0 ± 4.0a+b	2.6 ± 0.3a
ALN-shWBV	70596.1 ± 5729.3b	1063.2 ± 79.8b	1.9E+09 ± 4.5E+08b	22.0 ± 3.7a+b	57.7 ± 2.3a+b	208.7 ± 22.6b	4.0 ± 1.0b	6.0 ± 5.0b	1.1 ± 0.5b
ALN-WBV	69834.2 ± 4804.4b	1098.8 ± 69.8b	1.8E+09 ± 4.3E+08b	23.5 ± 3.3a+b	60.8 ± 6.3a+b	210.1 ± 13.9b	4.0 ± 0b	4.0  ± 1.0b	1.0 ± 0.2b

Means ± SD followed by “a” and “b” represent statistically significant difference from the ShOVX and OVX-shWBV group, respectively (p < 0.05).

Table 2

Results for bone stiffness, bone strength and cortical bone micro-structural parameters (Ct.Po, Ps.Pm, Ma.Ar, MMI, Ec.PM, Ct.Th) for each group evaluated.

	Mean ± Standard Deviation
Groups	Stiffness (N/mm)	Strength (N)	Ct.Po (%)	Ps.Pm (μm)	Ma.Ar (μm2)	MMI (μm4)	Ec.Pm (μm)	Ct.Th (μm)
shOVX	68280.0 ± 1571.6b	1042.6 ± 32.1b	1.4 ± 0.6	13557.6 ± 399.3b	4.8E+06 ± 3.7E+05b	1.2E+13 ± 1.4E+12	12275.2 ± 704.8	451.6 ± 20.0b
OVX-shWBV	60974.0 ± 3311.8a	934.2 ± 59.0a	1.2 ± 0.4	13944.3 ± 493.8a	5.9E+06 ± 4.6E+05a	1.3E+13 ± 1.5E+12	13727.2 ± 1595.5	410.8 ± 25.2a
OVX-WBV	58399.9 ± 3989.2a	900.1 ± 63.5a	1.0 ± 0.2	13265.2 ± 350.6b	4.7E+06 ± 3.3E+05b	1.2E+13 ± 1.1E+12	12027.7 ± 462.4	440.7 ± 23.3b
ALN-shWBV	70596.1 ± 5729.3b	1063.2 ± 79.8b	1.9 ± 0.7a+b	14231.8 ± 428.9a	5.8E+06 ± 6.3E+05a	1.5E+13 ± 1.9E+12a+b	13604.8 ± 940.8	450.4 ± 16.7 b+c
ALN-WBV	69834.2 ± 4804.4b	1098.8 ± 69.8b	1.9 ± 0.5a+b	14296.5 ± 726.0a	5.5E+06 ± 1.2E+06a	1.6E+13 ± 2.4E+12a+b	13498.0 ± 1846.6	483.6 ± 41.2 a+b

Means ± SD followed by: “a” represents statistically significant difference from ShOVX; “b” represents statistically significant difference from the OVX-shWBV group; and “c” represents statistically significant difference between ALN-shWBV and ALN-WBV (p < 0.05).

Effect of WBV and/or ALN on bone micro-structure

OVX caused a marked deterioration of the trabecular and cortical bone micro-structure, manifested as a considerable decrease in Ct.Th (−9%), BV (−52.6%), BV/TV (−63.6%), Tb.N (−75.0%) and increase in Ma.Ar (+21.9%), Tb.<al">span class="Chemical">Sp (+163.4%), TBPf (+466.7%) and SMI (+144.4%) (OVX-shWBV versus shOVX; Tables 1 and 2). Simultaneously, as a compensatory mechanism after ovariectomy, a slight increase in Ps.Pm was observed in OVX-shWBV compared to shOVX (+2.8%, Table 2). Mechanical stimulation of OVX rats with HF WBV for 14 days had no effect on the trabecular bone, except for TBPf (+23.5%, OVX-WBV versus OVX-shWBV; Table 1). At cortical level, the mechanical treatment was able to partially reverse the bone micro-structural deterioration after ovariectomy by decreasing substantially the Ma.Ar (-20.4%) and increasing Ct.Th (+7.2%) (OVX-WBV versus OVX-shWBV). Additionally, it is noteworthy that there were no differences between the cortical micro-structural parameters quantified for OVX-WBV and shOVX (table 2).

Unlike the single HF loading treatment, the pharmacological treatment with <span class="Chemical">alendronate revealed a <al">span class="Chemical">positive effect mainly on the trabecular bone micro-architecture of OVX rats, which was demonstrated by an increase in BV (+107.8%), BV/TV (+120%) and Tb.N (+300%) and a decrease in Tb.Sp (−58.2%), TBPf (−64.7%) and SMI (−50.0%). However, ALN administration was not able to improve the Tb.Th after ovariectomy (ALN-shWBV versus OVX-shWBV, Table 1). At cortical level, ALN administration was associated with an increased Ct.Th (+9.8%) and Ct.Po (+60.8%) compared to OVX-shWBV (ALN-shWBV versus OVX-shWBV, Table 2). When compared to shOVX group, ALN also presented higher values of Ct.Po (+38.8%), Ps.Pm (+5%), MMI (+18.5%) and Ma.Ar (+20.3%) (ALN-shWBV versus shOVX, Table 2). Finally, the combined application of ALN and HF resulted in a greater increase in Ct.Th when compared to shOVX or ALN-shWBV groups (+7.1% for ALN-WBV versus shOVX and +7.4% for ALN-WBV versus ALN-shWBV; Table 2).

Effect of WBV and/or ALN on bone mechanical competence

OVX caused a substantial decrease in bone stiffness (−10.7%) and bone strength (−10.4%) compared to shOVX (<span class="Chemical">OVX-shWBV versus shOVX; Tables 1 and 2). The mechanical treatment of OVX <al">span class="Species">rats with HF loading via WBV (OVX-WBV) did not affect bone stiffness nor strength when compared to OVX-shWBV. However, the pharmacologic treatment with ALN, combined or not with WBV, significantly increased bone stiffness (+15.8% for ALN-shWBV and 14.5% for ALN-WBV) and bone strength (+13.8% for ALN-shWBV and +17.6% for ALN-WBV) compared to the respective untreated OVX condition, with values equalling those of the shOVX group. In addition, no significant differences were detected between ALN-shWBV and ALN-WBV groups regarding bone stiffness and bone strength (Tables 1 and 2).

Discussion

The higher resolution of micro-computed tomography images and mechanical testing procedures2829 has highlighted the significance of several bone properties other than BMD for bone strength30, which can improve the <span class="Disease">fracture risk prediction and the assessment of anti-<al">span class="Disease">fracture efficacy of osteoporosis therapies. Impaired bone strength associated with altered bone turnover might result from decreases in the amount of bone mass, changes in bone micro-architecture or geometry, in the biophysical properties of bone tissue, or even from a combination of all of the above30. Therefore, the present study by using three-dimensional analysis, μCT and μFE analyses, evaluated the potential relation of bone mechanical competence with bone micro-structural changes of ovariectomy-induced compromised bone after single or combined treatment with HF loading and bisphosphonates.

In OVX <span class="Disease">osteoporotic <al">span class="Species">rats, a decreased bone mechanical competence associated with a cortex thinning and trabecular bone loss was observed. This increased bone fragility is a result of the negative bone multicelullar unit balance induced by estrogen withdrawal after ovariectomy, which is the morphological basis of bone loss and structural deterioration31. With a larger surface-to volume ratio, trabecular bone is rapidly affected by increases in bone resorption32. Individual trabeculae become progressively thinner, shifting from a plate-like shape to a rod-like shape while trabecular separation increases. Progressive perforation of individual rods leads to the loss of trabecular connectivity and reduces the number of trabeculae, resulting in trabecular micro-architecture deterioration33. These changes in trabecular micro-architecture were also observed in previous studies with ovariectomized rats and rapidly compromise bone strength3435. At cortical level, a higher endocortical resorption was noticed in OVX animals represented by an increase in Ma.Ar compared to shOVX, leading to a reduction in bone mass and cortical thickness despite of the slight periosteal expansion after ovariectomy. Clinical studies in postmenopausal women also reported about 50% of cortical bone loss as a result of remodelling within the inner (endosteal) surface adjacent to the marrow by cavitation36. Weakening of the cortical bone compartment is also of major importance for fragility fractures once cortical bone represents a substantial amount of the total bone mass, especially in the appendicular skeleton36. These results therefore demonstrate that micro-architectural changes after ovariectomy in either cortical or trabecular bone are responsible for significant variations in the bone mechanical properties.

The mechanical treatment with HF loading was not able to op<span class="Chemical">pose the negative effects of ovariectomy on the bone mechanical competence. HF loading increased the cortical thickness of OVX <al">span class="Species">rats by decreasing the endocortical resorption, represented in this study by lower values of Ma.Ar compared to OVX-shWBV. Notwithstanding this, the increase in cortical thickness after HF loading was not able to improve the OVX bone strength and bone stiffness since this mechanical stimuli did not prevent the trabecular bone deterioration, as also demonstred by Hatori et al.37. In agreement with our results, a recent study with ovariectomized rats also did not find substantial effects of mechanical stimulation neither on bone biomechanical properties nor on trabecular bone micro-architecture (4 weeks of WBV loading)38. However, after 12 weeks of mechanical treatment an improvement of the trabecular bone parameters of OVX animals could be noticed38. These results are in contrast to those reported by Tezval et al.35 and Sehmisch et al.34, who found that treatment with WBV for 5 weeks resulted in improved bone strength and bone mass, equalling the levels as observed in untreated sham rats. It is worth noting that differences could arise due to the skeletal site evaluated in the latter studies. The present study as well as the study by Chen and co-workers38 investigated the effects of mechanical treatment at the tibia, while the study of Tezval et al.35 and Sehmisch et al.34 evaluated the femur and vertebral body, respectively. The tibia was chosen because this sites enables concomittantly trabecular and cortical bone analysis, which is not the case for the vertebral body. Furthermore, the femura were used for isolation of bone-marrow derived stromal cells and investigation of the role of hormonal and mechanical influences on the progenitor cells’ biology. Also, the response of the skeletal tissues to mechanical loading depends on several factors including magnitude, duration and rate of stimulus39. Hence, it might be that the short duration of experimental period used in the present study, namely 14 days, has been insufficient to increase the bone mechanical competence in ovariectomized rats, since more densely mineralized bone is removed after ovariectomy and replaced by younger less mineralized bone, which has reduced stiffness40.

Unlike single HF loading treatment, <span class="Chemical">alendronate administ<al">span class="Species">ration was able to significantly enhance the bone mechanical competence in ovariectomized rats. This might be attributed to the efficacy of this drug in preventing ovariectomy-induced trabecular bone micro-architectural deteterioration. The large surface area of trabecular bone is an advantage in therapeutics because it facilitates the access of biphosphonates to inhibit matrix remodeling32. At the same time, a limited effect of ALN on the endocortical bone remodeling was observed, since the drug was not able to decrease the Ma.Ar enlargement that occurs after ovariectomy. As biphosphonates act by binding avidly to mineralized bone matrix41, and considering that at intracortical or endocortical surfaces there is less volume of mineralized cortical bone matrix, the accessibility of this drug to the bone remodeling that is occuring at these surfaces is reduced4243. Consequently, osteoclasts initiating remodeling upon a Haversian canal surface might not encounter and engulf matrix containing drug and continue reabsorbing bone at endocortical surface32, particularly in rodents that lack a true Haversian canal system44. Nevertheless, the association of ALN with HF loading seems to provide an additive effect at the level of endorcortical surface, demonstrated by lower values of Ma.Ar in comparison to the single pharmacological treatment. Thus, the effect of HF stimuli on the endocortical surface combined with the effect of ALN at the periosteal surface level contributed for an enlarged cortical thickness when compared to single application of these treatments. Chen et al.38 also showed that WBV enhanced the effect of alendronate on the trabecular micro-architecture in ovariectomized rats over 12 weeks, but the micro-structural changes at cortical level after this combined treatment was not investigated. In the present study, although there is a trend of the combined treatment with HF loading and ALN in improving trabecular micro-architecture and bone strength after ovariectomy, the results were statistically not significant when compared to single pharmacological treatment over 2 weeks. Therefore, long-term studies are needed in order to elicit the role of HF loading, combined or not with ALN, on trabecular bone.

From a biomechanical <span class="Chemical">point of view, an effective treatment for bone fragility should improve the extrinsic biomechanical properties of bone but at the same time not substantially impair the intrinsic properties. However, it is rare for a treatment to achieve this combination of effects45. <al">span class="Chemical">Bisphosphonates, by reducing excessively bone turnover, decreases the renewal of bone tissue and consequently increases the accumulation of older and extensively mineralized bone46. As a consequence, the bone becomes more brittle and therefore unable to absorb energy by elastic deformation. Additionally, it leads to the accumulation of damaged bone, facilitating micro-crack proliferation47. Therefore, recent studies have provided a well documented association between atypical fractures and long-term oral intake of alendronate848, which is a growing clinical concern9. Hence, in order to achieve a safer and better clinical effect on osteoporosis treatment, the combined use of ALN with HF WBV could be advised. Exercise–induced improvements in the inorganic bone component does not seem to restrict the mineralization degree, improves also the water content49, which is assumed to confer additional biomechanical advantages50 as the tissue become less brittle and more able to accomodate the loads applied to the bone before developing micro-damage. This combination therapy might decrease the dosage of ALN in clinical patients. Using a reduced dosage of biphosphonates (lower weekly dose or dosing every 2 weeks) is an unproven but appealing alternative9, providing an adequate but less complete surpress of bone turnover51 and is likely to provide fracture risk reduction.

The cross-sectional design and the relatively short-term experiment period of this study were the main limitations. Therefore, it remains unclear whether longer-term changes on the bone micro-architecture after HF and <span class="Chemical">ALN interventions would still affect the bone mechanical competence. Furthermore, an in silico technique was used in this study to determine the bone stiffness and bone strength based on bone micro-architecture since this methodology was successfuly validated in previous studies showing high precision1718. Future studies should also consider the inclusion of other methodologies to evaluate the biophysical properties of bone tissue, such as the degree and type of collagen cross-linking, hyd<al">span class="Species">ration, the mineral crystal size and their crystallinity in order to provide a complete insight into the bone mechanical competence.

In conclusion, in comparison to single treatment with HF loading, <span class="Chemical">ALN proved to be better in improving the mechanical competence of OVX-induced compromised bone. In addition, the association of <al">span class="Chemical">ALN with HF loading resulted in an additive anabolic effect on the cortical thickness.

Additional Information

How to cite this article: Camargos, G. V. et al. Mechanical competence of ovariectomy-induced compromised bone after single or combined treatment with high-frequency loading and <span class="Chemical">bisphosphonates. Sci. Rep. 5, 10795; doi: 10.1038/srep10795 (2015).