Literature DB >> 25998685

Effect of Osteotomy Position and Tibial Plateau Rotation on the Tensile Force Required for Failure of the Canine Quadriceps Mechanism.

Katie Hamilton1, John Tarlton, Kevin Parsons1, Mike Toscano2, Neil Burton1.   

Abstract

OBJECTIVE: To measure the tensile force required for failure of the quadriceps mechanism with different tibial tuberosity widths and different degrees of rotation of the tibial plateau after radial osteotomy of the proximal tibia. STUDY
DESIGN: Ex vivo study, randomized unblocked design ANIMALS: Thirty-five hind limbs from 18 adult Greyhound cadavers.
METHODS: Part 1 (15 limbs)--The center of rotation of the proximal tibial radial osteotomy was advanced craniodistally, progressively reducing absolute tibial tuberosity width (ATTW) for 5 different widths. Part 2 (21 limbs)-Tibial plateau rotation was performed at a set ATTW. Rotation was varied as a function of tibial tuberosity position with rotation proximal, level with, or distal to the tuberosity. All 35 limbs were tested with force applied via the quadriceps mechanism until construct failure occurred.
RESULTS: All but 2 limbs failed by fracture of the tibial tuberosity. The tensile force required for failure of the quadriceps mechanism increased linearly with increasing ATTW. Significantly less force (P = .016) was required for failure of the quadriceps mechanism when the rotation of the tibial plateau was distal to the level of the patella tendon (mean 1,877 N) compared to when it was above the level of the patella tendon (mean 2,533 N). Rotation of the tibial plateau distal to the level of the patella tendon insertion point resulted in fracture at the base of the tibial tuberosity, level with the tibial plateau buttress.
CONCLUSION: The overwhelming mode of failure of the quadriceps mechanism was by tibial tuberosity fracture, thus this was the weakest part of the construct. Reducing the tibial tuberosity width and rotation of the tibial plateau segment below the patella tendon insertion decreased the force required for tibial tuberosity fracture. These results support the idea of a safe point with the tibial plateau segment providing buttress to the tibial tuberosity. © Copyright 2015 by The American College of Veterinary Surgeons.

Entities:  

Mesh:

Year:  2015        PMID: 25998685     DOI: 10.1111/vsu.12339

Source DB:  PubMed          Journal:  Vet Surg        ISSN: 0161-3499            Impact factor:   1.495


  2 in total

1.  Comparison of TPLO tibial tuberosity fractures with and without an in situ rotational pin.

Authors:  Matthew J Morgan; Jean K Frazho
Journal:  BMC Res Notes       Date:  2018-06-08

2.  Efficacy of a Customized Three-Dimensional Printing Surgical Guide for Tibial Plateau Leveling Osteotomy: A Comparison With Conventional Tibial Plateau Leveling Osteotomy.

Authors:  Jayon Kim; Jaeeun Ko; Jaehwan Kim; Anna Seo; Kidong Eom
Journal:  Front Vet Sci       Date:  2021-11-25
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.