Literature DB >> 25991712

In vitro degradation and cell viability assessment of Zn-3Mg alloy for biodegradable bone implants.

M S Dambatta1, N S Murni2, S Izman1, D Kurniawan3, G R A Froemming4, H Hermawan5.   

Abstract

This article reports the in vitro degradation and cytotoxicity assessment of Zn-3Mg alloy developed for biodegradable bone implants. The alloy was prepared using casting, and its microstructure was composed of Mg2Zn11 intermetallic phase distributed within a Zn-rich matrix. The degradation assessment was done using potentiodynamic polarization and electrochemical impedance spectrometry. The cell viability and the function of normal human osteoblast cells were assessed using 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium and alkaline phosphatase extracellular enzyme activity assays. The results showed that the degradation rate of the alloy was slower than those of pure Zn and pure Mg due to the formation of a high polarization resistance oxide film. The alloy was cytocompatible with the normal human osteoblast cells at low concentrations (<0.5 mg/mL), and its alkaline phosphatase activity was superior to pure Mg. This assessment suggests that Zn-3Mg alloy has the potential to be developed as a material for biodegradable bone implants, but the toxicity limit must be carefully observed. © IMechE 2015.

Entities:  

Keywords:  Biodegradable metal; Zn–Mg alloy; cell viability; degradation; osteoblast

Mesh:

Substances:

Year:  2015        PMID: 25991712     DOI: 10.1177/0954411915584962

Source DB:  PubMed          Journal:  Proc Inst Mech Eng H        ISSN: 0954-4119            Impact factor:   1.617


  3 in total

1.  Biological Assessment of Zn-Based Absorbable Metals for Ureteral Stent Applications.

Authors:  Devi Paramitha; Stéphane Chabaud; Stéphane Bolduc; Hendra Hermawan
Journal:  Materials (Basel)       Date:  2019-10-12       Impact factor: 3.623

2.  The Fundamental Comparison of Zn-2Mg and Mg-4Y-3RE Alloys as a Perspective Biodegradable Materials.

Authors:  Jiří Kubásek; Drahomír Dvorský; Jiří Šedý; Šárka Msallamová; Jitka Levorová; René Foltán; Dalibor Vojtěch
Journal:  Materials (Basel)       Date:  2019-11-13       Impact factor: 3.623

3.  Evaluation of a Zn-2Ag-1.8Au-0.2V Alloy for Absorbable Biocompatible Materials.

Authors:  Ping Li; Christine Schille; Ernst Schweizer; Evi Kimmerle-Müller; Frank Rupp; Xingting Han; Alexander Heiss; Andreas Richter; Claudia Legner; Ulrich E Klotz; Jürgen Geis-Gerstorfer; Lutz Scheideler
Journal:  Materials (Basel)       Date:  2019-12-20       Impact factor: 3.623

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.