| Literature DB >> 25977859 |
Serena Gagliardi1, Mauro Falconieri1.
Abstract
For dye-sensitized solar cells (DSSC), the fundamental process that determines the maximum short-circuit current is the absorption of light. In such devices, this is produced by the concurrent phenomena of light absorption by dye molecules and light trapping in the mesoporous,Entities:
Keywords: dye-sensitized solar cells; light trapping; optical characterization; photoanode modeling; titania nanostructures
Year: 2015 PMID: 25977859 PMCID: PMC4419673 DOI: 10.3762/bjnano.6.91
Source DB: PubMed Journal: Beilstein J Nanotechnol ISSN: 2190-4286 Impact factor: 3.649
Figure 1Experimental total transmissivity spectrum (a) and reflectivity spectra (b) of a 6.5 µm thick photoanode.
Figure 2Absorbed light fraction of a PA calculated from experimental reflectivity and transmissivity spectra (continuous line), and of the solution containing the same dye load (dashed line).
Figure 3Spectrum of the experimentally determined absorption enhancement factor γ(λ) (dotted line) together with the theoretical maximum value (continuous line).
Figure 4Specific surface area and N719 dye load of the model PA as a function of the nanoparticle diameter. The shadowed region characterizes the uncertainty in the diameter of the nanoparticles in the titania paste used in this work, and the consequent uncertainty on the specific surface area and N719 dye content. The experimental value of the dye load, obtained as reported in the text, is also reported.
Figure 5Fraction of light absorbed in the modeled PA in absence of light trapping (a), and in the case of maximum light trapping (b), shown for different diameters of titania nanoparticles.
Figure 6Short-circuit current density calculated for the model electrode, for varying titania nanoparticle size (i.e., varying the dye loading); dark circles: neglecting LT phenomena; open squares: considering the maximum LT. The star represents the value of the current density calculated for the case of experimentally determined light trapping using the average diameter of the TiO2 nanoparticles.
Figure 7Example of a J–V characteristic of a DSSC based on the studied PA; the photovoltaic parameters are also reported.