Development of thermal runaway preventing ZnO varistor for surge protective device.

In this paper, the centre of electrode is suggested for heat conduction. Therefore, the specific reflow soldering process is needed. The comparison of temperature difference among the different areas of ZnO varistors is analyzed. With the nominal surge current, thermal behavior is analyzed. The operation point of temperature for disconnection is proposed. Accordingly, the thermal runaway-preventing ZnO varistors were covered with a fusible alloy, i.e., a thermal fuse, in the process of manufacture, which is expected to ensure there the liability of being resistant to lightning discharge and to ensure stability against thermal runaway in the failure mode. Additionally, it is expected to reduce much more limit voltage than the existing products to which the fuse was separately applied. The thermal runaway-preventing ZnO varistor of the surge protection devices can be widely used as part of the protection provisions of lightning discharge and surge protection demanded in connection with power IT about Green Growth which is nowadays becoming the buzzword in the electric power industry.