Lumbar compression forces while lifting and carrying with two and four workers.

Team lifting and carrying is advised when loads exceed 25 kg and mechanical lifting is not feasible. The aim of this study was to assess mean, maximum and variability of peak lumbar compression forces which occur daily at construction sites. Therefore, 12 ironworkers performed 50-kg two-worker and 100-kg four-worker lifting and carrying tasks in a laboratory experiment. The 50-kg two-worker lifts resulted in significantly higher mean (Δ 537 N) and maximum (Δ 586 N) peak lumbar compression forces compared with the 100-kg four-worker lifts. The lowest mean and maximum peak lumbar compression forces were found while carrying on level ground and increased significantly when stepping over obstacles and up platforms. Lifting 100 kg with four workers in a rectangular line up resulted in lower compression forces compared with lifting 50 kg with two workers standing next to each other. When loads are carried manually routes should be free of any obstacles to be overcome.