PURPOSE: To assess the long-term effect of a 2% aqueous chlorhexidine (CHX) solution on bond strength to artificially eroded dentin compared to sound dentin. MATERIALS AND METHODS: Flat mid-coronal dentin surfaces of extracted third molars (n = 28) were subjected only to grinding with a 600-grit SiC paper for 1 min (sound dentin S, n = 14) or additionally to erosive pH cycling with a cola-based soft-drink (eroded dentin E, n = 14). After acid etching, rinsing, and air drying, S and E were rehydrated with 1.5 μl of 2% CHX (S2%, n = 7; E2%, n = 7) or of distilled water (control SC, n = 7; EC, n = 7). Composite buildups were incrementally constructed with Filtek Z350 following Adper Single Bond 2 application. Specimens were sectioned into beams, which were subjected to microtensile testing immediately or after 6 or 12 months of aging. Fractured surfaces were observed under a digital microscope (50X magnification). Microtensile bond strength (μTBS) (MPa) was analyzed by three-way ANOVA and Tukey's tests (α = 0.05) and failure mode by the Kruskal-Wallis test (α = 0.05). RESULTS: Compared to sound dentin, eroded dentin was consistently related to lower μTBS. Immediately and after 12-month aging, the effect of CHX was insignificant, but it was significant after 6-month aging, when it conserved the bond strength to both eroded and sound dentin. The percentage of adhesive and mixed failures were equivalent, and significantly more frequent than cohesive failures, whether in dentin or in composite. CONCLUSION: The 2% CHX effect on bond strength conservation to both eroded and sound dentin was not found to be persistent.
PURPOSE: To assess the long-term effect of a 2% aqueous chlorhexidine (CHX) solution on bond strength to artificially eroded dentin compared to sound dentin. MATERIALS AND METHODS: Flat mid-coronal dentin surfaces of extracted third molars (n = 28) were subjected only to grinding with a 600-grit SiC paper for 1 min (sound dentin S, n = 14) or additionally to erosive pH cycling with a cola-based soft-drink (eroded dentin E, n = 14). After acid etching, rinsing, and air drying, S and E were rehydrated with 1.5 μl of 2% CHX (S2%, n = 7; E2%, n = 7) or of distilled water (control SC, n = 7; EC, n = 7). Composite buildups were incrementally constructed with Filtek Z350 following Adper Single Bond 2 application. Specimens were sectioned into beams, which were subjected to microtensile testing immediately or after 6 or 12 months of aging. Fractured surfaces were observed under a digital microscope (50X magnification). Microtensile bond strength (μTBS) (MPa) was analyzed by three-way ANOVA and Tukey's tests (α = 0.05) and failure mode by the Kruskal-Wallis test (α = 0.05). RESULTS: Compared to sound dentin, eroded dentin was consistently related to lower μTBS. Immediately and after 12-month aging, the effect of CHX was insignificant, but it was significant after 6-month aging, when it conserved the bond strength to both eroded and sound dentin. The percentage of adhesive and mixed failures were equivalent, and significantly more frequent than cohesive failures, whether in dentin or in composite. CONCLUSION: The 2% CHX effect on bond strength conservation to both eroded and sound dentin was not found to be persistent.
Authors: Mariana Dias Moda; Ticiane Cestari Fagundes; André Luiz Fraga Briso; Paulo Henrique Dos Santos Journal: PLoS One Date: 2018-11-26 Impact factor: 3.240
Authors: Tasnim Hamdan-Nassar; Carlos Bellot-Arcís; Vanessa Paredes-Gallardo; Verónica García-Sanz; Agustín Pascual-Moscardó; José Manuel Almerich-Silla; José María Montiel-Company Journal: Medicina (Kaunas) Date: 2019-12-02 Impact factor: 2.430
Authors: Madalena Belmar da Costa; António H S Delgado; Teresa Pinheiro de Melo; Tomás Amorim; Ana Mano Azul Journal: Biomater Investig Dent Date: 2021-02-15
Authors: Mohammed S Bin-Shuwaish; Alhanouf A AlHussaini; Lina H AlHudaithy; Shamma A AlDukhiel; Abdullah S Al-Jamhan Journal: Saudi Dent J Date: 2020-10-01