Literature DB >> 25885762

Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks.

James O Hardin1, Thomas J Ober1, Alexander D Valentine1, Jennifer A Lewis1.   

Abstract

Multimaterial 3D printing using microfluidic printheads specifically designed for seamless switching between two visco-elastic materials "on-the-fly" during fabrication is demonstrated. This approach opens new avenues for the digital assembly of functional matter with controlled compositional and property gradients at the microscale.
© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Keywords:  3D printing; ink; microfluidics; multi-material; viscoelastic

Year:  2015        PMID： 25885762     DOI： 10.1002/adma.201500222

Source DB:  PubMed          Journal:  Adv Mater        ISSN： 0935-9648            Impact factor:   30.849


  53 in total

Review 1.  Printing soft matter in three dimensions.

Authors:  Ryan L Truby; Jennifer A Lewis
Journal:  Nature       Date:  2016-12-14       Impact factor: 49.962

Review 2.  Advances in engineering hydrogels.

Authors:  Yu Shrike Zhang; Ali Khademhosseini
Journal:  Science       Date:  2017-05-05       Impact factor: 47.728

3.  Spatially and Temporally Controlled Hydrogels for Tissue Engineering.

Authors:  Jeroen Leijten; Jungmok Seo; Kan Yue; Grissel Trujillo-de Santiago; Ali Tamayol; Guillermo U Ruiz-Esparza; Su Ryon Shin; Roholah Sharifi; Iman Noshadi; Mario Moisés Álvarez; Yu Shrike Zhang; Ali Khademhosseini
Journal:  Mater Sci Eng R Rep       Date:  2017-07-25       Impact factor: 36.214

Review 4.  Opportunities and challenges of translational 3D bioprinting.

Authors:  Sean V Murphy; Paolo De Coppi; Anthony Atala
Journal:  Nat Biomed Eng       Date:  2019-11-06       Impact factor: 25.671

Review 5.  Biomaterials for Bioprinting Microvasculature.

Authors:  Ryan W Barrs; Jia Jia; Sophia E Silver; Michael Yost; Ying Mei
Journal:  Chem Rev       Date:  2020-09-01       Impact factor: 60.622

6.  Extrusion and Microfluidic-based Bioprinting to Fabricate Biomimetic Tissues and Organs.

Authors:  Elham Davoodi; Einollah Sarikhani; Hossein Montazerian; Samad Ahadian; Marco Costantini; Wojciech Swieszkowski; Stephanie Willerth; Konrad Walus; Mohammad Mofidfar; Ehsan Toyserkani; Ali Khademhosseini; Nureddin Ashammakhi
Journal:  Adv Mater Technol       Date:  2020-05-26

7.  Rapid Continuous Multimaterial Extrusion Bioprinting.

Authors:  Wanjun Liu; Yu Shrike Zhang; Marcel A Heinrich; Fabio De Ferrari; Hae Lin Jang; Syeda Mahwish Bakht; Mario Moisés Alvarez; Jingzhou Yang; Yi-Chen Li; Grissel Trujillo-de Santiago; Amir K Miri; Kai Zhu; Parastoo Khoshakhlagh; Gyan Prakash; Hao Cheng; Xiaofei Guan; Zhe Zhong; Jie Ju; Geyunjian Harry Zhu; Xiangyu Jin; Su Ryon Shin; Mehmet Remzi Dokmeci; Ali Khademhosseini
Journal:  Adv Mater       Date:  2016-11-17       Impact factor: 30.849

8.  Modulating physical, chemical, and biological properties in 3D printing for tissue engineering applications.

Authors:  Claire Yu; Wei Zhu; Bingjie Sun; Deqing Mei; Maling Gou; Shaochen Chen
Journal:  Appl Phys Rev       Date:  2018-12       Impact factor: 19.162

Review 9.  3D Bioprinting for Tissue and Organ Fabrication.

Authors:  Kan Yue; Julio Aleman; Kamyar Mollazadeh Moghaddam; Syeda Mahwish Bakht; Yu Shrike Zhang; Jingzhou Yang; Weitao Jia; Valeria Dell'Erba; Pribpandao Assawes; Su Ryon Shin; Mehmet Remzi Dokmeci; Rahmi Oklu; Ali Khademhosseini
Journal:  Ann Biomed Eng       Date:  2016-04-28       Impact factor: 3.934

Review 10.  Three-Dimensional Bioprinting Strategies for Tissue Engineering.

Authors:  Yu Shrike Zhang; Rahmi Oklu; Mehmet Remzi Dokmeci; Ali Khademhosseini
Journal:  Cold Spring Harb Perspect Med       Date:  2018-02-01       Impact factor: 6.915
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.