Literature DB >> 25813027

Polyglycerol based coatings to reduce non-specific protein adsorption in sample vials and on SPR sensors.

Tobias Becherer1, Christian Grunewald2, Vivienne Engelschalt2, Gerhard Multhaup3, Thomas Risse2, Rainer Haag2.   

Abstract

Coatings based on dendritic polyglycerol (dPG) were investigated for their use to control nonspecific protein adsorption in an assay targeted to analyze concentrations of a specific protein. We demonstrate that coating of the sample vial with dPG can significantly increase the recovery of an antibody after incubation. First, we determine the concentration dependent loss of an antibody due to nonspecific adsorption to glass via quartz crystal microbalance (QCM). Complementary to the QCM measurements, we applied the same antibody as analyte in an surface plasmon resonance (SPR) assay to determine the loss of analyte due to nonspecific adsorption to the sample vial. For this purpose, we used two different coatings based on dPG. For the first coating, which served as a matrix for the SPR sensor, carboxyl groups were incorporated into dPG as well as a dithiolane moiety enabling covalent immobilization to the gold sensor surface. This SPR-matrix exhibited excellent protein resistant properties and allowed the immobilization of amyloid peptides via amide bond formation. The second coating which was intended to prevent nonspecific adsorption to glass vials comprised a silyl moiety that allowed covalent grafting to glass. For demonstrating the impact of the vial coating on the accuracy of an SPR assay, we immobilized amyloid beta (Aβ) 1-40 and used an anti-Aβ 1-40 antibody as analyte. Alternate injection of analyte into the flow cell of the SPR device from uncoated and coated vials, respectively gave us the relative signal loss (1-RUuncoated/RUcoated) caused by the nonspecific adsorption. We found that the relative signal loss increases with decreasing analyte concentration. The SPR data correlate well with concentration dependent non-specific adsorption experiments of the analyte to glass surfaces performed with QCM. Our measurements show that rendering both the sample vial and the sensor surface is crucial for accurate results in protein assays.
Copyright © 2015 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Biosensor; Molecular diagnostics; Nonspecific protein adsorption; QCM; SPR

Mesh:

Substances:

Year:  2015        PMID: 25813027     DOI: 10.1016/j.aca.2015.01.048

Source DB:  PubMed          Journal:  Anal Chim Acta        ISSN: 0003-2670            Impact factor:   6.558


  2 in total

Review 1.  Branched, dendritic, and hyperbranched polymers in liquid biopsy device design.

Authors:  Michael J Poellmann; Piper Rawding; DaWon Kim; Jiyoon Bu; YoungSoo Kim; Seungpyo Hong
Journal:  Wiley Interdiscip Rev Nanomed Nanobiotechnol       Date:  2022-01-04

Review 2.  Recent Advancements in Receptor Layer Engineering for Applications in SPR-Based Immunodiagnostics.

Authors:  Marcin Drozd; Sylwia Karoń; Elżbieta Malinowska
Journal:  Sensors (Basel)       Date:  2021-05-29       Impact factor: 3.576

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.