Literature DB >> 25793923

3D printing of a multifunctional nanocomposite helical liquid sensor.

Shuang-zhuang Guo1, Xuelu Yang, Marie-Claude Heuzey, Daniel Therriault.   

Abstract

A multifunctional 3D liquid sensor made of a PLA/MWCNT nanocomposite and shaped as a freeform helical structure was fabricated by solvent-cast 3D printing. The 3D liquid sensor featured a relatively high electrical conductivity, the functionality of liquid trapping due to its helical configuration, and an excellent sensitivity and selectivity even for a short immersion into solvents.

Year:  2015        PMID： 25793923     DOI： 10.1039/c5nr00278h

Source DB:  PubMed          Journal:  Nanoscale        ISSN： 2040-3364            Impact factor:   7.790


  7 in total

1.  3D printing of versatile reactionware for chemical synthesis.

Authors:  Philip J Kitson; Stefan Glatzel; Wei Chen; Chang-Gen Lin; Yu-Fei Song; Leroy Cronin
Journal:  Nat Protoc       Date:  2016-04-14       Impact factor: 13.491

2.  3D Printed Stretchable Tactile Sensors.

Authors:  Shuang-Zhuang Guo; Kaiyan Qiu; Fanben Meng; Sung Hyun Park; Michael C McAlpine
Journal:  Adv Mater       Date:  2017-05-05       Impact factor: 30.849

3.  Fabricating Fibers of a Porous-Polystyrene Shell and Particle-Loaded Core.

Authors:  Dharneedar Ravichandran; Weiheng Xu; Rahul Franklin; Namrata Kanth; Sayli Jambhulkar; Sumedh Shukla; Kenan Song
Journal:  Molecules       Date:  2019-11-15       Impact factor: 4.411

Review 4.  High Precision 3D Printing for Micro to Nano Scale Biomedical and Electronic Devices.

Authors:  Kirsty Muldoon; Yanhua Song; Zeeshan Ahmad; Xing Chen; Ming-Wei Chang
Journal:  Micromachines (Basel)       Date:  2022-04-18       Impact factor: 3.523

Review 5.  Additive Manufacturing of Biomaterials-Design Principles and Their Implementation.

Authors:  Mohammad J Mirzaali; Vahid Moosabeiki; Seyed Mohammad Rajaai; Jie Zhou; Amir A Zadpoor
Journal:  Materials (Basel)       Date:  2022-08-08       Impact factor: 3.748

6.  Filaments Production and Fused Deposition Modelling of ABS/Carbon Nanotubes Composites.

Authors:  Sithiprumnea Dul; Luca Fambri; Alessandro Pegoretti
Journal:  Nanomaterials (Basel)       Date:  2018-01-18       Impact factor: 5.076

7.  Facile Preparation of Stereoblock PLA From Ring-Opening Polymerization of rac-Lactide by a Synergetic Binary Catalytic System Containing Ureas and Alkoxides.

Authors:  Ze Kan; Wenlong Luo; Tong Shi; Chuanzhi Wei; Binghao Han; Dejuan Zheng; Shaofeng Liu
Journal:  Front Chem       Date:  2018-11-09       Impact factor: 5.221
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.