Oxidation state, a long-standing issue!

1. Introduction

The oxidation state is the <span class="Chemical">simplest attribute of an element in a <span class="Chemical">compound. It is taught early in the chemistry curriculum as a convenient electron-counting scheme for redox reactions. Its applications range from descriptive chemistry of elements to nomenclature and electrochemistry, or as an independent variable in plots and databases of bonded-atom properties (such as radius, bond-valence parameter, standard reduction potentials, spectral parameters, or spin).

The history of the oxidation state goes back about 200 years when it described the stepwi<span class="Chemical">se increa<span class="Chemical">se in the amount of oxygen bound by elements that form more than one oxide. In his 1835 textbook Unorganische Chemie,[1] Wöhler speaks of such an “oxydationsstufe” (an older German spelling for oxidation grade). This expression remains in use for oxidation state in several languages. The equivalent term oxidation number is also common; in English this refers more to redox balancing than to the chemical systematics of an element.[2]

Under the entry for oxidation number, the IUPAC “Gold Book”[3] gives a defining algorithm for the oxidation state of a central atom as the charge it obtains after removal of its ligands along with the shared electron pairs. The entry for oxidation state in Ref. [3] complements this with a set of charge-balance rules and of postulated oxidation states for oxygen and hydrogen with exceptions. Details vary from textbook to textbook. Some list the rules according to decreasing priority to avoid the explicit exceptions; here is an example:[4]

Atoms in an element have oxidation state 0.

The sum of the oxidation states for atoms in a <span class="Chemical">compound is 0.

<span class="Chemical">Fluorine in <span class="Chemical">compounds has the oxidation state −1.

<span class="Chemical">Alk<span class="Chemical">aline metals in compounds have the oxidation state +1, alkaline-earth metals +2.

<span class="Chemical">Hydrogen in <span class="Chemical">compounds has the oxidation state +1.

<span class="Chemical">Oxygen in <span class="Chemical">compounds has the oxidation state −2.

In recent debates, Steinborn[5] and Loock[6] advocate Pauling’s[7] approach of assigning shared electron pairs to the more electronegative atom. Jensen[8] elaborates on some of the points considered by Loock. Smith[9] and Parkin[10] address the oxidation state in the context of related terms. Calzaferri[11] as well as Linford and co-workers[12] make suggestions on the oxidation state of organic compounds. Jansen and Wedig[13] point out the heuristic nature of the oxidation state and require that “concepts need to be defined as precisely as possible, and these definitions must always be kept in mind during applications”.

IUPAC <span class="Chemical">also re<span class="Chemical">alized the need to approach a connotative definition of the oxidation state. In 2009, a project was initiated “Toward Comprehensive Definition of Oxidation State”, led by the author of this Essay, and its results have recently been published in an extensive Technical Report.[14] We started with a generic definition of oxidation state in terms broad enough to ensure validity. Then we refined those terms to obtain typical values by algorithms tailored for Lewis, summary, and bond-graph formulas.

2.Generic Definition

The oxidation state is the atom’s charge after ionic approximation of its bonds. The terms to be clarified are the “atom’s charge”, “its bonds”, and the “ionic approximation”.

The atom’s charge is the usu<span class="Chemical">al count of valence electrons relative to the free atom. The oxidation state is a quantitative concept that operates on integer values of counted electrons. This may require idealizing visual representations or rounding off numerical results.

Approximating <span class="Chemical">all bonds to be ionic may lead to unusu<span class="Chemical">al results. If the N=N bond in N2O were extrapolated to be ionic, the central nitrogen atom would have an oxidation state of +5 and the terminal one −3. To obtain less extreme values, bonds between atoms of the same element should be divided equally upon ionic approximation.

<span class="Chemical">Sever<span class="Chemical">al criteria were considered for the ionic approximation: 1) Extrapolation of the bond’s polarity; a) from the electronegativity difference, b) from the dipole moment, c) from quantum-chemical calculations of charges. 2) Assignment of electrons according to the atom’s contribution to the molecular orbital (MO).

<span class="Chemical">As dis<span class="Chemical">cussed in Appendix B of Ref. [14], most electronegativity scales depend on the atom’s bonding state, which makes the assignment of the oxidation state a somewhat circular argument. Some scales lead to unusual oxidation states, such as −6 for platinum in PtH42− with Pauling or Mulliken scales. Appendix E of Ref. [14] shows that a Lewis-basic atom with an electronegativity lower than its Lewis-acidic bond partner would lose the often weak and long bond upon ionic approximation of their adduct, thereby yielding an unusual oxidation state. Appendix A of Ref. [14] points out that dipole moments of molecules such as CO and NO, which are oriented with their positive end towards oxygen,[15-17] would lead to abnormal oxidation states. Appendix C of Ref. [14] illustrates the variety of calculated quantum-chemical atomic charges. This leaves the atom’s contribution to the bonding MO, the atomic-orbital energy, as the criterion for ionic approximation (Figure 1).

Figure 1

The essence of the adopted ionic approximation based on the contribution to the bonding MO. The mixing coefficients cA and cB refer to the atomic-orbital wavefunctions ψA and ψB in an MO-LCAO approach (LCAO=linear combination of atomic orbitals).

The es<span class="Chemical">sence of the ado<span class="Chemical">pted ionic approximation based on the contribution to the bonding MO. The mixing coefficients cA and cB refer to the atomic-orbital wavefunctions ψA and ψB in an MO-LCAO approach (LCAO=linear combination of atomic orbitals).

Figure 1 implies that while AA bonds are divided equ<span class="Chemical">ally, in an AB <span class="Chemical">compound the atom contributing more to the bonding molecular orbital receives negative charge under ionic approximation of the bond. Ref. [14a] emphasizes that the said contribution does not concern the actual origin of the bond’s electrons upon its formation, only their final allegiance. Figure 1 is not an instruction to use the mixing coefficients; it merely illustrates a concept. The same ionic approximation is obtained when the more heuristic orbital energies are considered.

3. Simple Estimate of Ionic Approximation

Should <span class="Chemical">complicated MO schemes make the above criterion impractic<span class="Chemical">al, the ionic approximation can be estimated from electronegativities. Of several scales discussed in Appendix B of Ref. [14], only the Allen electronegativity is truly independent of the oxidation state, as it relates to the average valence-electron energy of the free atom.[18-20] Such an ionic approximation is obtained when the bonds implied in Figure 1 are abstracted away (Figure 2).

Figure 2

The ionic approximation according to the relative energies of the free-atom valence orbitals, conveniently derived from Allen’s electronegativities.

The ionic approximation ac<span class="Chemical">cording to the relative energies of the free-atom v<span class="Chemical">alence orbitals, conveniently derived from Allen’s electronegativities.

The electronegativity criterion for the ionic approximation carries an exce<span class="Chemical">ption if the more electronegative atom is rever<span class="Chemical">sibly bonded as a Lewis acid (a so called Z-ligand, Appendix E of Ref. [14]): Its acceptor orbital is high, and the less-electronegative Lewis-base donor atom retains the electrons because of its larger contribution to the bonding MO. An allegiance criterion by Haaland[21] identifies such an adduct: Applied to ionic approximation, one asks where the bonding electrons go when the bond is split thermally. If the split is heterolytic, the ionic approximation follows the electrons; if homolytic, electronegativity applies. Table 1 lists the Allen scale.

Table 1

Allen electronegativities[18–20] (in Pauling units).

H 2.300							He 4.16
Li 0.912	Be 1.576	B 2.051	C 2.544	N 3.066	O 3.610	F 4.193	Ne 4.787
Na 0.912	Mg 1.293	Al 1.613	Si 1.916	P 2.253	S 2.589	Cl 2.869	Ar 3.242
K 0.734	Ca 1.034	Ga 1.756	Ge 1.994	As 2.211	Se 2.424	Br 2.685	Kr 2.966
Rb 0.706	Sr 0.963	In 1.656	Sn 1.834	Sb 1.984	Te 2.158	I 2.359	Xe 2.582
Cs 0.659	Ba 0.881	Tl 1.789	Pb 1.854	Bi 2.01	Po 2.19	At 2.39	Rn 2.60
Sc 1.19	Ti 1.38	V 1.53	Cr 1.65	Mn 1.75	Fe 1.80	Co 1.84	Ni 1.88	Cu 1.85	Zn 1.59
Y 1.12	Zr 1.32	Nb 1.41	Mo 1.47	Tc 1.51	Ru 1.54	Rh 1.56	Pd 1.58	Ag 1.87	Cd 1.52
Lu[a] 1.09	Hf 1.16	Ta 1.34	W 1.47	Re 1.60	Os 1.65	Ir 1.68	Pt 1.72	Au 1.92	Hg 1.76

[a] The variation across the lanthanoid series has not been evaluated.

<span class="Chemical">Allen electronegativities[18-20] (in P<span class="Chemical">auling units).

[a] The variation acr<span class="Chemical">oss the <span class="Chemical">lanthanoid series has not been evaluated.

4. Algorithm for Summary Formulas

The octet rule[22] <span class="Chemical">concerns the m<span class="Chemical">ost electronegative atoms in the periodic system. On a sufficiently simple summary formula involving such atoms, it alone dictates the oxidation states. The algorithm is named DIA (direct ionic approximation) in Ref. [14]: Atoms are assigned octets according to their decreasing electronegativity until all the available valence electrons are used up. The atom charges then represent the oxidation states.

Typic<span class="Chemical">al DIA-friendly species are homoleptic binaries of at least one sp element (Figure 3): CO, HF2−, NO3−, NO2, NH4+, CrO42−, BF4−, SF6, SnCl62−, CuCl42−, RuO4, AuI4−…; or solids with a homoleptic periodic bonding unit: KBr, SiC, AlCl3, SnCl2, etc. DIA of compounds of three or more elements may become ambiguous, with the limitations discussed in Appendix D of Ref. [14].

Figure 3

Oxidation states (in red) in CO and HF2− from DIA (direct ionic approximation) performed on a summary formula by distributing valence electrons (here drawn in pairs) into octets according to decreasing electronegativity.

Oxidation states (in red) in <span class="Chemical">CO and <span class="Gene">HF2− from DIA (direct ionic approximation) performed on a summary formula by distributing valence electrons (here drawn in pairs) into octets according to decreasing electronegativity.

5. Algorithm of Assigning Bonds

The<span class="Chemical">se <span class="Chemical">algorithms work on Lewis formulas that display all the valence electrons: Bonds are assigned to the more negative bond partner identified by ionic approximation. The resulting atom charges then represent the oxidation state (Figure 4). As only homonuclear bonds are divided (equally), the correct bond multiplicity is essential only between those pairs of atoms of the same element that appear asymmetrical within the segment of the pair’s bonds, including the sign of their ionic approximation: Whereas the OO bond order in Figure 4 would not matter so long as the -OO- segment were kept symmetrical, the NN bond order in an N2O Lewis formula always matters.

Figure 4

Oxidation states (in red) in peroxynitrous acid, obtained by assigning bonds to more electronegative partners on Lewis formula with all valence-electron pairs drawn (dashes).

Oxidation states (in red) in <span class="Chemical">peroxynitrous acid, obtained by <span class="Chemical">assigning bonds to more electronegative partners on Lewis formula with all valence-electron pairs drawn (dashes).

An example of the exce<span class="Chemical">ption to the rule of ionic approximation ac<span class="Chemical">cording to electronegativity is [(C5H5)(CO)2Fe=B(C6H5)3][23] on the right-hand side of Figure 5. Despite the higher electronegativity of B, the Lewis-basic Fe atom keeps the electrons it donated to bond triphenylborane. When B is replaced by Al[24] (Figure 5 left), the same principle applies, now in line with the Fe and Al electronegativities. The weak donor–acceptor bonds in these two adducts are the telltale sign of the reversibility criterion of Haaland,[21] suggested in Ref. [14] to identify cases of electron allegiance against electronegativity such as the one on the right-hand side of Figure 5.

Figure 5

Oxidation states (in red) by assigning a metal–metal bond according to the atoms’ contributions to the bonding MO. An assignment according to the electronegativity needs to invoke the caveat of a Lewis-basic atom with electronegativity lower than the Lewis-acidic one (in the formula on the right).

Oxidation states (in red) by <span class="Chemical">assigning a metal–metal bond according to the atoms’ contributions to the bonding MO. An assignment according to the electronegativity needs to invoke the caveat of a Lewis-basic atom with electronegativity lower than the Lewis-acidic one (in the formula on the right).

6. Algorithm of Summing Bond Orders

This <span class="Chemical">algorithm is tailored to bond graphs. A bond graph repre<span class="Chemical">sents the infinite periodic network of an extended solid.[25,26] It is constructed on a stoichiometric formula of the network’s repetitive unit, with atom symbols distributed such that a straight line is drawn for each instance of an atom’s bonding connectivity. Each line carries its own specific bond order. To obtain the oxidation state, a sum is calculated at each atom, of the orders of its bonds weighted by their ionic sign at that atom. Such an “ionized bond order sum”, iBOS, then equals the atom’s oxidation state. Figure 6 explains this on the AuORb3 perovskite-type structure[27] with bond orders according to the 8+N rule at Rb, 8−N rule at O, and the 12−N rule at Au.

Figure 6

The unit cell and coordination polyhedra of the AuORb3 perovskite with its bond graph of ideal bond orders (values in blue) obtained from the 8−N rule for O, the 8+N rule for Rb, and the 12−N rule for Au. The bond orders are shown with signs, which sum up at each atom to yield that atom’s oxidation state (in red).

The unit cell and <span class="Chemical">coordination polyhedra of the AuORb3 perovskite with its bond graph of ideal bond orders (values in blue) obtained from the 8−N rule for O, the 8+N rule for Rb, and the 12−N rule for Au. The bond orders are shown with signs, which sum up at each atom to yield that atom’s oxidation state (in red).

The 8+N rule: An electropo<span class="Chemical">sitive sp atom with N v<span class="Chemical">alence electrons forms N two-electron bonds with atoms of higher electronegativity. The rule concerns alkali metals and alkaline-earth metals. The 8 in its name symbolizes the preceding noble-gas shell.

The 8−N rule: An electronegative sp atom with N v<span class="Chemical">alence electrons tends to form 8−N but not more than four two-electron bonds with atoms of equ<span class="Chemical">al or lower electronegativity. As an example, phosphorus with 5 valence electrons forms 3 two-electron bonds in the P4 tetrahedron, and nitrogen does the same in N2. In heteroatomic molecules, the 8−N rule is enforced by higher electronegativity. For example: In sulfur fluorides, the 8−N rule concerns fluorine. Bonds in SF2, SF4, and SF6 have all approximately the length of a single bond.[28] In the series BF, CO, and N2, the full triple bond suggested by the octet rule only occurs in N2, whereas O and F force the bond order towards 2 and 1, respectively.[29] The 8−N rule is not the same as the octet rule, as each can be violated independently: The Lewis formula of N2O can be drawn as |N]N-O|, which has octets yet violates the 8−N rule on oxygen. Hydrogen obeys an analogous 2−N rule.

The 12−N rule: An element having clo<span class="Chemical">se to 12 dsp electrons in its outerm<span class="Chemical">ost shells tends to lose those that exceed 12 or to gain in bonds those less than 12. While the first tendency (to form s2 cations) is magnified by other trends in the main groups of the periodic system, the second (to form s2 anions) is specific to Pt and Au, which in such compounds are called relativistic chalcogens and halogens, respectively.[30]

Be<span class="Chemical">sides bond graphs, the <span class="Chemical">algorithm works on Lewis formulas that display bond orders. It works directly if the formula does not carry formal charges. If it does, the atom’s formal charge FC is added to the atom’s positive or negative sum of bond orders iBOS to yield its oxidation state [Eq. (1)].[14b] This relationship is illustrated for CO and [Cr(CO)6] in Figure 7.

Figure 7

Oxidation state (in red) in carbon monoxide (left) and chromium hexacarbonyl (right) calculated from Lewis formulas of idealized bond orders (in blue) featuring nonzero formal charges (in black).

Oxidation state (in red) in <span class="Chemical">carbon monoxide (left) and <span class="Chemical">chromium hexacarbonyl (right) calculated from Lewis formulas of idealized bond orders (in blue) featuring nonzero formal charges (in black).

The bond orders in extended solids are not <span class="Chemical">always obvious and may have to be estimated from bond lengths. This is done by <span class="Chemical">converting each bond length into the so-called bond valence, which is a value entirely equivalent to the bond order in terms of two-electron bonds in molecules. The origins of the bond-valence approach—one[31] ionic and one[32] covalent—are associated with Linus Pauling. In Ref. [32], an expression is given that morphed into the current relation for bond valence versus bond length [Eq. (2)].

In this expres<span class="Chemical">sion, BV and d are the respn>ective bond valence and distance of the atoms i and j, R0 is the single-bond length between them, and B is a variable parameter often fixed to 0.37. Although for the best accuracy R0 is a function of the coordination number and oxidation state of the “cation” for a given “anion” (fitted[33,34] to a set of such structures), a general approach[35] lists two parameters for each atom, related to the size and electronegativity, from which R0 is calculated for any atom pair i and j. As the oxidation state operates on integer electrons, a round off is required on the obtained bond valences/orders or on their ionized sums at an atom.

We will now an<span class="Chemical">alyze <span class="Chemical">WCl4 in Figure 8. The bond graph of its infinite chain has a W-W group and eight Cl atoms, with each W coordinating six Cl atoms by two single, two 3/4, and two 1/2 bonds, as estimated from experimental bond lengths[36] in Ref. [14c]. Participation of more than one p orbital at the Cl bridge above and below W-W makes its bond-order sum (1.5 at Cl) exceed the 8−N rule. A chain edge resembles locally a molecule, and such a Cl atom in a Lewis formula would carry a formal charge of 0.5+, compensated by 0.25− at each of the two W atoms it bridges. This feature can be seen in the bond graph in Figure 8.

Figure 8

Top: A segment of the infinite WCl4 chain with alternate W=W bonds. Bottom: Bond graph of the chain with idealized bond orders (in blue, rounded off bond-length to bond-valence calculations), which sum at each atom with the formal charges (in black) to the oxidation state of that atom (in red).

Top: A <span class="Chemical">segment of the infinite <span class="Chemical">WCl4 chain with alternate W=W bonds. Bottom: Bond graph of the chain with idealized bond orders (in blue, rounded off bond-length to bond-valence calculations), which sum at each atom with the formal charges (in black) to the oxidation state of that atom (in red).

The bond-valence approach to bond orders can <span class="Chemical">also be used for finite species. An example is Cu5I72− [37] in Figure 9. One of the five Cu atoms bonds to four iodine atoms, while the remaining four Cu atoms bond three. Two of the seven iodine atoms bond to three Cu atoms and the remaining five only to two. The oxidation state is evaluated as a round off value of the positive and negative sums of bond valences calculated with Equation (2)] from bond distances dCuI in Ref. [37] and R0CuI=2.188 Å obtained from parameters in Ref. [35]. As the Cu=Cu bonds are not approximated to be ionic, only the CuI bonds are relevant besides the 2/7 bonds from each iodine atom to the cations omitted in Figure 9, which yields ionized bond valence sums of −1.05(4) per iodine and +1.07(2) per Cu atom. A round off yields a single oxidation state for each element in a nice demonstration of the Pauling’s[31] parsimony rule.

Figure 9

Bond valences (in blue) in Cu5I72− and the sums of the ionized bond valence at the atoms (in pink) that yield the oxidation states (in red) upon rounding off. Blue sphere Cu, yellow sphere I.

Bond valences (in blue) in <span class="Chemical">Cu5I72− and the sums of the ionized bond valence at the atoms (in pink) that yield the oxidation states (in red) upon rounding off. Blue sphere Cu, yellow sphere I.

An example of an sp molecule shows another kind of bonding compromise: (C6H5)3P]C]P(C6H5)3. This extreme Lewis formula emphasizes the high order of the phosphorus-to-carbon bond because of the 8−N rule working for the more electronegative carbon atom. A bond order of 1.9 is calculated as above from the distance[38,39] of 1.63 Å. As the PCP angle is not 180° but only 134°,[39] the 8−N rule is somewhat violated due to the only small difference in the electronegativity of P and C, and it is clear that this bond has a strong ionic contribution from the formal charges 1+, 2−, and 1+ that would appear on the PCP segment if σ bonded. As these charges comply with the electronegativity, the bond strengthens and becomes a[40] “sort of double bond”. When this ionocovalent interaction is drawn with two full dashes as above, the formula loses its formal charges, and the oxidation states equal directly to the sums of the ionized bond order: −4 at the carbon and +5 at the phosphorus atom. That makes sense redox-wise within the molecule[41] as well as in its full[42,43] synthesis. Given the bond strength, the Haaland criterion is unlikely to apply in this case.

An example of an sp cluster is <span class="Chemical">As4S4. It oc<span class="Chemical">curs as two different molecules, where both elements maintain the 8−N rule (an electron-precise cluster). This information is sufficient to obtain their oxidation states by sums of the ionized bond orders (Figure 10).

Figure 10

Oxidation states (in red) obtained by summing the bond orders (in blue) in two σ-bonded As4S4 clusters that maintain the 8−N rule.

Oxidation states (in red) obtained by summing the bond orders (in blue) in two σ-bonded <span class="Chemical">As4S4 clusters that maintain the 8−N rule.

A cluster where the 8−N rule is weakened due to steric compromise is S4N4. It is the same as on the left side of Figure 10, except that N replaces S while S replaces As. Neither atom complies with the 8−N rule, which would require formation of three short two-electron bonds from the small N to the bulky S atom. As the bond lengths and angles in solid S4N4[44] are irregular, data for gaseous S4N4[45] are considered here: The molecule has a sulfur tetrahedron with a point symmetry and bond lengths of 2.666 and 2.725 Å, far longer than a single bond of 2.055 Å.[46] One approach to sensible oxidation states is to neglect these weak S-S interactions and consider S4N4 a cyclic tetramer with an SN summary formula, to which DIA applies to yield +3 and −3 for the oxidation states. Bond-based algorithms give the same result (Figure 11) on a symmetrical Lewis formula with 22 electron pairs, by considering the SNS bond angle of 105.3(7)° is tetrahedral and complemented by two lone pairs of electrons at N, with each S atom forming one single bond to another S atom (with a 1− formal charge at N and 1+ charge at S). The reality is somewhere in between these two simplifications: The S=N bond valence calculated with parameters from Ref. [35] with a S=N bond length of 1.623(4) Å[45] is 1.40(2)—more than the single bond of the Lewis formula but not quite the 1.50 required by the 8−N rule. The similarly calculated sum of the homonuclear bond valence at each S atom of the tetrahedron is about 0.5, half of the 1.00 generated by the single bond in the Lewis formula.

Figure 11

Oxidation states evaluated on formulas approximating S4N4: a periodic unit of a ring (left; neglecting the weak bonds among the sulfur atoms in the real compound) and a Lewis formula of octets (middle and right; approximating the tetrahedral sulfur cluster with two S=S bonds).

Oxidation states ev<span class="Chemical">aluated on formul<span class="Chemical">as approximating S4N4: a periodic unit of a ring (left; neglecting the weak bonds among the sulfur atoms in the real compound) and a Lewis formula of octets (middle and right; approximating the tetrahedral sulfur cluster with two S=S bonds).

In gener<span class="Chemical">al, the bonding in non<span class="Chemical">metallic sp binary compounds CA is rationalized with the Zintl concept[47] and its formalization with the generalized 8−N rule[48,49] [Eq. (3)]. In this relation, VECA is the valence-electron count per “anion” A, CC is the number of electrons per “cation” C that form C=C bonds or are localized at the cation as lone pairs, and AA is the number of electrons per A that form A=A bonds. The VECA value lends itself to a verbal approach to the rule: Whereas electrons in excess of 8 remain at the less-electronegative atom as bonds or lone pairs, electrons short of 8 are gained by forming bonds between the more electronegative atoms.

For our S4N4 example above, we obtain VECA=11. The three electrons in excess of eight remain at the S atom <span class="Chemical">as one S=S bond and one lone pair per S atom in our Lewis formula; in re<span class="Chemical">ality this is somewhat violated, since electronegativity makes sulfur enforce the 8−N rule almost as strongly as nitrogen.

When there is sufficient difference in electronegativity, bonding predictions with the gener<span class="Chemical">alized 8−N rule are preci<span class="Chemical">se. Consider GaSe with VECA=9: The single electron in excess of 8 would remain on Ga, thereby forming single-bonded Ga=Ga dumbbells. That is indeed the case, and the oxidation states in GaSe are evaluated by summing bond orders in Figure 12.

Figure 12

Unit cell of GaSe with one full Ga coordination shown (left, two of the three coordinated Se atoms are outside the unit cell) and the oxidation states determined from its bond graph (right). The bond order dictated by the 8−N rule is listed above the three connectivity lines. Below them, the bond valence is listed, calculated from the bond length determined[50] by X-ray diffraction.

Unit cell of Ga<span class="Chemical">Se with one full Ga <span class="Chemical">coordination shown (left, two of the three coordinated Se atoms are outside the unit cell) and the oxidation states determined from its bond graph (right). The bond order dictated by the 8−N rule is listed above the three connectivity lines. Below them, the bond valence is listed, calculated from the bond length determined[50] by X-ray diffraction.

Boranes of gener<span class="Chemical">al formula BH (b&4, c≤0) are sp clusters that are not electron-preci<span class="Chemical">se (the skeleton bonds are not single bonds). When all the B atoms are equivalent, the oxidation state can be evaluated by DIA on a repeat unit, such as BH(1/3)− with 4 1/3 electrons for B6H62−. The unit’s hydrogen atom obtains 2 electrons (2−N rule), thereby leaving 2 1/3 electrons at B, which means that OSB=+2/3 (still counting whole electrons; 2 per 3 atoms). Generalizing that OSH=−1, charge balance yields (h+c)/b for the average boron oxidation state in BH. To resolve individual boron oxidation states, Wade–Mingos rules[51-54] are applied first: As an example, B6H10 has 14 valence-electron pairs of which 6 are in B=H single bonds, 1 always is in a radial-skeletal MO, and the remaining 7, in the tangential skeletal MOs, form a 7-vertex parent deltahedron (pentagonal bipyramid), of which one vertex is “missing” in B6H10 (a nido-borane; Figure 13). Its B atoms are not all equivalent. The five basal boron atoms are bonded to nine hydrogen atoms that maintain the 2−N rule. Summation of the bond orders with a positive sign yields an oxidation state of +2 for three of these B atoms (those in front) and +3/2 for the remaining two. The apical B atom has an oxidation state of +1 arising from one single bond to H.

Figure 13

The nido-borane B6H10.

The <span class="Chemical">nido-borane B6H10.

7. What if the Compound is Metallic?

When bonding and antibonding orbitals/bands overlap in a metal, we are no longer entitled to make the ionic extrapolations as in Figure 1. However, there are simple metallic compounds with obvious oxidation states, such as the golden TiO, dark RuO2, or silvery ReO3. Some sp elements also form stoichiometric metallic compounds: Ba3Si4 obeys the Zintl concept[47] in that it forms butterfly-shaped Si46− anions, in which two Si atoms have two bonds and two Si atoms three bonds to each other according to the generalized 8−N rule, but the compound is weakly metallic.[55]

Ultimately, the <span class="Chemical">assignment of conducting electrons to one of the two bonded atoms has its limits. An indication of the problem is an unexpected electron configuration or an unexpected bonding pattern. The former is exemplified by the AuNCa3 perovskite[56] (Figure 14), where neglecting its metallic character suggests Au3− anions, for which there is no support in theory. The latter may be illustrated on two platinides: red transparent Cs2Pt[57] and[58] black BaPt. In line with the 12−N rule, Cs2Pt contains isolated Pt2− anions—a relativistic sulfide. However, BaPt does not have such anions; it has chains of Pt as if there were a deficit of electrons at the Pt atom. This means that some electrons left Pt2− to make BaPt metallic, and it is this deficit that is compensated by forming Pt=Pt bonds. If these Pt=Pt bonds were single bonds, their chain would be a neutral relativistic sulfur and BaPt would be built of Ba2+, 2e−, and Pt in infinite chains. As BaPt appears formally stoichiometric, the +2 oxidation state for Ba leaves Pt with −2, which does not comply with the actual bonding.

Figure 14

Bond graph for the metallic perovskite AuNCa3, in which summing bond orders (in blue) of N and Ca, obtained from 8−N and 8+N rules, respectively, yields an invalid oxidation state for Au.

Bond graph for the <span class="Chemical">metallic perovskite <span class="Chemical">AuNCa3, in which summing bond orders (in blue) of N and Ca, obtained from 8−N and 8+N rules, respectively, yields an invalid oxidation state for Au.

Unsatisfactory oxidation states are <span class="Chemical">also obtained when DIA is applied to ordered <span class="Chemical">alloys with compositions and structures dictated largely by the size, such as LiPb or Cu3Au, where the 8−N or 12−N rules for the most electronegative element are not valid. If an oxidation state is needed to balance redox equations, it is best considered zero for all elements.

8. Nominal Oxidation States

The applications of oxidation state in chemistry are wide, and one v<span class="Chemical">alue does not <span class="Chemical">always fit all. In systematic descriptive chemistry, the oxidation state sorts out compounds of an element; in electrochemistry, it represents the electrochemically relevant compound or ion in Latimer diagrams and Frost diagrams of standard (reduction) potentials. Such purpose-oriented oxidation states that differ from those by definition may be termed nominal, here “systematic” and “electrochemical”.

An example of both is <span class="Chemical">thiosulfate. Its structur<span class="Chemical">al properties[59] suggest that all its terminal atoms carry some of the anion charge, even if the S=S and S=O bond orders are not entirely equal. The S=S bond distance of 2.025 Å[59] is shorter than the single bond of 2.055 Å[46] in crystalline S8 or 2.056 Å[60] in H2S2 gas, but substantially longer than the double bond of 1.883 Å[61,62] in S2O or 1.889 Å[63] in S2. Although the single S=S bond is the closest approximation, two limiting Lewis formulas are considered in Figure 15.

Figure 15

Oxidation states in thiosulfate by assignment of bonds and by summing bond orders on two limiting Lewis formulas (in which the author chose to draw bonds to unexpressed cations to avoid formal charges) with a sulfur–sulfur single bond (left), double bond (right).

Oxidation states in <span class="Chemical">thiosulfate by <span class="Chemical">assignment of bonds and by summing bond orders on two limiting Lewis formulas (in which the author chose to draw bonds to unexpressed cations to avoid formal charges) with a sulfur–sulfur single bond (left), double bond (right).

The formula on the left provides oxidation state −1 at the termin<span class="Chemical">al <span class="Chemical">sulfur atom, reminiscent of the value in peroxides. The formula on right suggests oxidation states that at times are used for a Lewis acid–base interpretation of the synthesis reaction S + SO32−=S2O32−, making it a nonredox process. This is not necessarily an advantage, as this reaction in an aqueous environment is well-described with half-reaction standard potentials that utilize the average sulfur oxidation state +2, which represents thiosulfate in Latimer and Frost diagrams—an electrochemical oxidation state. The only route to unambiguous oxidation states for both S atoms in thiosulfate would be to resolve the S=S bond polarity, as in some textbooks: the terminal sulfur has −2, the central sulfur +6, independent of their bond order and emphasizing the similarity of the O and S ligands—a systematic oxidation state.

9. Non-Innocent Ligands: H2

Jørgen<span class="Chemical">sen[64,65] coined the adjective “non-innocent” for redox-active ligands that render the oxidation state of the central atom less obvious. Additional information from diffraction, spectra, or magnetic measurements is needed. Of the many examples,[66-68] the simplest non-innocent ligand is molecular H2.

<span class="Chemical">Complexes with molecular H2 resemble hapto complexes of olefins or aromatic hydrocarbons, except that H2 only has a σ bond. Despite this, H2 attaches to metal cations even in the gas phase, free of solvents, substrates, and intervening atoms, as elaborated in a recent review[69] by Bieske and co-workers. An intriguing ambiguity arises: with some metal ions, the atoms of the H2 molecule remain bonded to each other, while with others they form a dihydride. Crabtree[70] attributes this to the central transition-metal atom having both empty and filled d orbitals: The former participate in the three-center bonding MO that binds the H2 moiety while the latter sabotage this by back donation into the empty antibonding MO of H2. The two extreme outcomes are presented schematically in Figure 16.

Figure 16

Two extremes of an H2 adduct with a generic metal atom M.

Two extremes of an <span class="Chemical">H2 adduct with a generic <span class="Chemical">metal atom M.

In 1984, Kub<span class="Chemical">as et <span class="Chemical">al.[71] synthesized the first transition-metal complex with an H2 ligand, the yellow [W(CO)3(η2-H2)[P(C6H11)3]2], by precipitating it from a solution of [W(CO)3[P(C6H11)3]2] in toluene with H2 gas. An example of the hydride formation is [Ir(CO)Cl(H)2[P(C6H5)3]2],[72,73] obtained from H2 and the square-planar [Ir(CO)Cl[P(C6H5)3]2],[74] also known as Vaska’s complex. Both types of bonded hydrogen occur in [Ru(H)2(η2-H2)2[P(C5H9)3]2],[75] the oxidation states of which are evaluated in Figure 17.

Figure 17

Oxidation states (in red) of hydrogen and ruthenium in [RuH2(η2-H2)2[P(C5H9)3]2],[75] obtained by assigning bonds onto the electronegative partner (left) and by summing ionized bond orders (right).

Oxidation states (in red) of <span class="Chemical">hydrogen and <span class="Chemical">ruthenium in [RuH2(η2-H2)2[P(C5H9)3]2],[75] obtained by assigning bonds onto the electronegative partner (left) and by summing ionized bond orders (right).

The octahedr<span class="Chemical">al <span class="Chemical">complex in Figure 17 is stabilized by the d6 electronic configuration and the 18-plet on Ru. While the two cis-hydride anions are 2.13 Å apart, the H=H distance in the H2 ligand is 0.83 Å (0.09 Å longer than in H2 gas). Its bond order is 0.78, a little more than 2/3 for a three-center bond of equal partners, and this can be attributed to the 2−N rule working for the more electronegative hydrogen atom.

A review by Morris[76] of <span class="Chemical">iron-group <span class="Chemical">H2 complexes shows that the H=H bond distances vary, up to about 1.60 Å for the largest Os,[77] and also depend on the ligand trans to H2: When that ligand is an electron-rich sp atom, such as oxygen or a halogen[78] capable of strong π donation to the central atom, the H=H distance is long. When that ligand is π-acidic, such as CO, or when it is electron-poor, the H=H distance is short.[76] The distance increases with the extent of back donation from the central atom into the σ* MO of H2, as controlled by the metal’s size and by the trans ligand. By our oxidation-state definition, the back-bonding metal atom gets its electrons back because it is the main contributor to this additional metal–ligand bonding interaction, which is antibonding with respect to the H=H bond. Allen electronegativities also yield zero for the oxidation state of all such η2 hydrogen atoms.

10. Non-Innocent Ligands: Nitrosyl

Perhaps the best known nitr<span class="Chemical">osyl <span class="Chemical">complex is nitroprusside. While CN in [Fe(CN)5NO]2− is easy, NO offers three alternatives for the nitrogen oxidation state: NO+, NO, and NO−. They differ in bond order: either |N]O|+ with OSN= +3, or |N]O|− with OSN=+1 (by DIA), or the nitrogen monoxide of OSN=+2 in between.

We ado<span class="Chemical">pt the bond-v<span class="Chemical">alence approach: Single-crystal neutron diffraction of Ba[Fe(CN)5(NO)]⋅3 H2O[79] yields an NO bond length of 1.12 Å, shorter than the 1.15 Å[80] in NO gas. Considering that the 8−N rule for oxygen will tend to decrease the actual bond order towards two, the observed bond length suggests |N]O|+, hence Fe2+. The diamagnetism of nitroprusside confirms this: The electron configuration at Fe is low-spin d6 and OSFe=+2. The octahedral field of strong splitters keeps the low-spin configuration even upon reduction to [Fe(CN)5NO]3−; it is the NO+ ligand that is reduced to NO not iron. A truly non-innocent ligand

Many nitrosyl complexes are not as straightforward. The MNO segment should be linear for |N]O|+ but bent for |N]O|−.[81,82] The snag is that the MNO angles vary, indicating fractional NO bond orders and problematic oxidation-state assignments.[83-85] Enemark and Feltham[86] avoided oxidation states in nitrosyl complexes altogether by adopting a [MNO] notation, where n is the number of valence electrons on the metal when the ligand is formally NO+.

A recent study[87] reinvestigated [Fe(CO)3(NO)]−, which seems isoelectronic with [Fe(CO)4]2− in which iron has an oxidation state of −2—a mere replacement of CO with NO+. Something was not right though: the FeNO angle is linear, but the NO bond distance of 1.21 Å suggests a double bond |N]O|−. Spectroscopic and quantum-chemical considerations in Ref. [87] brought an explanation: The Lewis-basic N atom of the |N]O|− anion donates both electron pairs as two π bonds to the Fe central atom (no σ bond), thereby linearizing the FeNO angle and validating the double bond within NO. The resulting oxidation state of 0 for iron is corroborated in Ref. [87] by the diamagnetism of the complex, caused mainly by antiferromagnetic coupling of two unpaired electrons at the tetrahedrally coordinated d8 iron with two unpaired electrons at the NO− ligand, isoelectronic with O2. Ref. [87] therefore also lists these d configuration electrons in an expanded Enemark–Feltham notation: [Fe8.2(NO)]10 (8.2 was calculated). Figure 18 illustrates the stabilizing 18-plet at Fe.

Figure 18

The Lewis formula of [Fe(CO)3(NO)]− (left) illustrating the 18-plet and the oxidation state of iron by assigning bonds. Intramolecular antiferromagnetic coupling leads to diamagnetism of the anion (right).

The Lewis formula of [<span class="Chemical">Fe(CO)3(NO)]− (left) illustrating the 18-plet and the oxidation state of <span class="Chemical">iron by assigning bonds. Intramolecular antiferromagnetic coupling leads to diamagnetism of the anion (right).

11. Oxidation-State Tautomerism

Oxidation-state tautomerism, <span class="Chemical">also known as valence tautomerism, concerns thermally induced oxidation-state changes involving redox-active ligands and redox-prone central atoms. Manganese catecholate is an example. At low temperatures, magnetic measurements suggest [Mn(C6H4O2)3] has one catecholate and two semiquinonate ligands around a central Mn atom of oxidation state +4.[88] At high temperatures, the magnetic moment suggests reduction to high-spin Mn3+ upon oxidation of the catecholate to semiquinonate. Lewis formulas for the two ligand alternatives are drawn in Figure 19, where the transition is illustrated and relevant oxidation states evaluated by both algorithms. More examples have been surveyed.[89-91] An oxidation-state tautomerism among solely central atoms is exemplified in Ref. [14d].

Figure 19

Oxidation-state tautomerism of [Mn(C6H4O2)3]. Bond orders in blue.

Oxidation-state t<span class="Chemical">automerism of [<span class="Chemical">Mn(C6H4O2)3]. Bond orders in blue.

12. Oxidation State and dn Configuration

The configuration d is a central-atom descriptor for transition-metal complexes. It becomes tricky when the ligand is bonded by the more electronegative atom as a Lewis acid. One of the examples discussed in Ref. [14e] is [Au[B(PC6H4)2(C6H5)]Cl].[92] In this adduct, Au populates the Au=B weakly bonding MO so that the Mössbauer spectrum still sees this MO together with the rest of the d electrons at Au as d10, thus suggesting an oxidation state of +1 for gold, despite the square-planar coordination at Au that is typical of Au3+ with d8 (Figure 20). The square-planar Au appears because the donated Au pair became the Au=B bond itself, lost its ligand-field effect, and the coordination geometry is now controlled by the 8 electrons of Au remaining in the weakly antibonding MOs. Our generic definition also suggests +1 for gold. For this oxidation state to maintain the important formula n=N−OS valid for d at a transition-metal atom with N valence electrons, n must also include the weakly bonding pair donated by the central atom. To fulfill the equation and avoid the emerging ambiguity exemplified above by the d10 “spectroscopic” versus the d8 “ligand-field” or “magnetic” configurations, we follow Parkin[93] by noting the configuration as n=10 in d, where “2” symbolizes a weakly bonding “donated” pair.

Figure 20

Square-planar Au in [Au[B(PC6H4)2(C6H5)]Cl].[92]

13. Choices, Estimates, and Round Offs

For inter<span class="Chemical">metallic <span class="Chemical">compounds, the ultimate choice of the oxidation state zero at all atoms is best if needed in redox chemistry. Usage-related choices also define the nominal oxidation states (see Section 8).

Subtler estimates and round offs are required for compounds with electrons delocalized over non-equivalent atoms, as expressed by several resonance formulas with weights in arbitrarily long decimal numbers. Without round offs of bond orders in Lewis formulas, decimal values of oxidation states would be obtained for certain bonding connectivities (to which DIA does not apply; Ref. [14] Appendix D). Examples are 1H-pentaazole,[14f] N5+,[14g] thiosulfate (see Section 8). Compounds with steric bonding compromises, such as S4N4 (see Section 6), are a related group. Compounds with conflicts of bond-stability rules make a similar group, illustrated in Ref. [14g] with N2O (DIA does not apply).

On the other hand, unambiguous and reasonable fractions of sm<span class="Chemical">all integers are obtained for oxidation states in compounds such as dithiolate and catecholate (see Section 11) or in (car)boranes such as B6H10 (see Section 6) and B10C2H12,[14h] or when vicinal oxidation states are indistinguishably mixed, such as in YBaFe2O5.[14d] Reasonable fractional oxidation states appear also in ions where the charge is distributed over several equivalent atoms such as C7H7+, B6H62−,[14i] I3−, and N3−.[14j]

Round offs are necessary for bond-v<span class="Chemical">alence sums after the bond-length to bond-v<span class="Chemical">alence conversions with Equation (2). Their decimal values are inherent to the statistical distribution of bonding compromises when the length of a given bond is compared to an average length of a selected group of reference bonds. In addition, an empirical function is used for the bond-length to bond-order conversion.

14. Outlook on Computational Approaches

The generic definition in Ref. [14] states: “The oxidation state of a bonded atom equals its charge after ionic approximation”. Only heteronuclear bonds are extrapolated to be ionic, and the atom to become negative is the one that contributes more to the bonding MO. The heuristic MO diagram in Figure 1 does suggest that quantum-chemical calculations might be used to evaluate oxidation states. As discussed in Appendix C of Ref. [14], this carries an inherent degree of ambiguity because of the variety of computational methods available and of the basis-set data to choose from. Within this limitation, a possible MO approach might use a generalization stating that an atom reversibly contributing more to a given MO or MO* of a heteronuclear bond keeps that MO’s electrons,[14k] with a built-in condition that homonuclear bonds are split evenly. This is illustrated with nitrogen monoxide in Figure 21. Somewhat obscured by the sp interaction, we see that a MO is closer in energy to one of its two contributing AOs. That AO then receives the MO’s electrons upon ionic approximation. When repeated over all the MOs, the expected oxidation states are obtained (Figure 21).

Figure 21

Oxidation states in nitrogen monoxide by assigning the MO’s electrons to the energetically closest AOs in a MO set deduced from the orbital energies estimated with an extended-Hückel program.[94]

Oxidation states in <span class="Chemical">nitrogen monoxide by <span class="Chemical">assigning the MO’s electrons to the energetically closest AOs in a MO set deduced from the orbital energies estimated with an extended-Hückel program.[94]

A molecule with a homonuclear bond, <span class="Chemical">N2O, is treated similarly in Figure 22. During such a “manual” approach, one has to identify atoms that are actually or predominantly bonded together by each particular MO. Although merely illustrative of a conceptual suggestion, the oxidation-state approach in Figure 22 circumvents the dilemma encountered in Ref. [14f] over two alternative Lewis formulas of N2O.

Figure 22

Oxidation states in N2O by assigning the MO’s electrons to the energetically closest AO in a MO set from an extended-Hückel program[94] calculation. Four unoccupied MOs are omitted.

Oxidation states in <span class="Chemical">N2O by <span class="Chemical">assigning the MO’s electrons to the energetically closest AO in a MO set from an extended-Hückel program[94] calculation. Four unoccupied MOs are omitted.

15. A Summary of the Algorithms

A <span class="Chemical">simplified approach to the ionic approximation and oxidation states identifies the negative atom by comparing Allen electronegativities with the exception of the more electronegative atom being bonded as a Lewis acid. This approach comes in three algorithms for three different types of chemical formulas (summary formula, Lewis formula, bond graph) covering molecules, ions, and 1D (chains), 2D (planes), or 3D infinite networks of solids. An overview of the inputs and validity is given in Table 2.

Table 2

Overview of the three oxidation-state algorithms based on ionic approximation according to electronegativity.

Algorithm	Valid for	Input	Performed on
direct ionic approximation	homoleptic binaries of sp terminal atoms	summary formula, total number of valence electrons	individual atom symbols of the summary formula
assigning bonds	finite molecules or ions[a]	Lewis formula of the above, showing all bond pairs and lone pairs, and, if present, all fractional bond pairs and fractional lone pairs	Lewis formula
summing bond orders	finite molecules or ions[a]	Lewis formula with all of the above, and formal charges for all atoms	Lewis formula
	solids with 1D, 2D,[b] or 3D infinite networks	bond graph with all bonding connectivities marked as lines, bond order (bond valence) for all connectivity lines	bond graph

[a] The simplifying use of electronegativity as a criterion for the ionic approximation (Figure 1 versus Figure 2) carries an exception: In reversible adducts of a Lewis-acidic atom with an electronegativity higher than its Lewis-basic counterpart, the base keeps the donated pair. [b] In 1D and 2D networks, possible formal charges of atoms at molecule-like edges or faces need to be identified on the bond graph (see example in Figure 8).

Overview of the three oxidation-state <span class="Chemical">algorithms ba<span class="Chemical">sed on ionic approximation according to electronegativity.

[a] The <span class="Chemical">simplifying u<span class="Chemical">se of electronegativity as a criterion for the ionic approximation (Figure 1 versus Figure 2) carries an exception: In reversible adducts of a Lewis-acidic atom with an electronegativity higher than its Lewis-basic counterpart, the base keeps the donated pair. [b] In 1D and 2D networks, possible formal charges of atoms at molecule-like edges or faces need to be identified on the bond graph (see example in Figure 8).

16. Conclusion

The suggested oxidation-state definition justifies both IUPAC algorithms in Ref. [3], while removing exce<span class="Chemical">ptions and including some defiant cases, such as those of ligand acceptor atoms with an electronegativity higher than the donor. Being based on chemical bonding, our definition does not replace the algorithms needed early on in the chemistry curriculum. It might be helpful at a higher level.