| Literature DB >> 25737738 |
YuJin Kim1, JiYoung Shin1, ShinMyung Kang1, SunYoung Kyung1, Jeong-Woong Park1, SangPyo Lee1, SangMin Lee1, Sung Hwan Jeong1.
Abstract
INTRODUCTION: Automatic fire suppression systems use hydrofluorocarbons (HF) to extinguish fires chemically. At high temperatures, HF can release hydrofluoric acid (HFA), a toxic, potentially lethal gas. CASE REPORT: A 52-year-old male visited our Pulmonary Division with dyspnea of 8-months duration. He had been working at a facility that manufactured fire extinguishers. Bronchoscopy was performed and a transbronchial lung biopsy was taken from the right lower lobe. After the patient was diagnosed with pulmonary alveolar proteinosis (PAP), whole-lung lavage was performed. In this case, fire extinguisher gas induced pulmonary alveolar proteinosis. This material should be used with care and investigated further. DISCUSSION: HFA is corrosive and penetrates organic materials, including body tissues. Depending on the mode of exposure, skin ulceration, pulmonary injury, or even systemic shock can result. This report describes PAP that developed after chronic, repeated exposure to fire extinguisher spray. Hydrofluoric acid can induce pulmonary disorders such as PAP.Entities:
Keywords: Hydrofluoric acid (HFA); Hydrofluorocarbons (HF); Pulmonary alveolar proteinosis (PAP)
Year: 2015 PMID: 25737738 PMCID: PMC4347543 DOI: 10.1186/s12995-015-0048-7
Source DB: PubMed Journal: J Occup Med Toxicol ISSN: 1745-6673 Impact factor: 2.646
Figure 1Contrast enhanced computed tomography revealing Crazy paving patterned diffuse ground glass attenuation with inter/intralobular septal thickening, representing diffuse alveolar damage, both lungs (black arrow).
Figure 2Histology of the left lung, pulmonary alveolar proteinosis high magnification photomicrograph showing complete filling of alveoli with periodic-acid-Schiff-positive granular material in preserved alveolar architecture (black arrow) (PAS, x400).
Figure 3Whole lung lavage fluid, first bottle (left and upper) is milky, opaque fluid and thick sediment layer. Last bottle (right lower) is fade compared to previously bottle and no sediment.