Literature DB >> 25654059

Canal shaping with one shape file and twisted files: a comparative study.

Peddamallu Jitender Reddy1, Vedati Santosh Kumar2, Kumbakonam Aravind3, Harish Tvs Kumar2, Bharath Vishal M4, Vasudha Nelluri Vizaikumar4, Rupali Das5, K Vamsilatha6.   

Abstract

AIM: The aim of this study was to compare the shaping ability of two different rotary Nickel -Titanium (Ni-Ti) files, One shape file and Twisted files in a simulated artificial canals.
MATERIALS AND METHODS: A total of 40 endodontic training blocks were used in this study and divided in two groups consisting of 20 each ( n = 20) and the shaping ability was accessed based on the left over ink stain in the artificial canal.
RESULTS: Image proplus analysis software and stereomicroscope were used for analysing the shaping ability of the files and statistical analysis was done by SPSS software. Twisted files showed better shaping ability compared to one shape file both experimentally and statistically.
CONCLUSION: It can be concluded that twisted files shaped the canals better then one shape file.

Keywords:  One shape file; Rotary instruments NiTi; Shaping ability; Twisted files

Year:  2014        PMID: 25654059      PMCID: PMC4316365          DOI: 10.7860/JCDR/2014/11126.5333

Source DB:  PubMed          Journal:  J Clin Diagn Res        ISSN: 0973-709X


  19 in total

1.  ProTaper rotary root canal preparation: assessment of torque and force in relation to canal anatomy.

Authors:  O A Peters; C I Peters; K Schönenberger; F Barbakow
Journal:  Int Endod J       Date:  2003-02       Impact factor: 5.264

2.  A comparative study of the effects of two nickel-titanium preparation techniques on root canal geometry assessed by microcomputed tomography.

Authors:  Alexios L Loizides; Vasilios D Kakavetsos; Giorgos N Tzanetakis; Evangelos G Kontakiotis; George Eliades
Journal:  J Endod       Date:  2007-12       Impact factor: 4.171

3.  Use of nickel-titanium rotary PathFile to create the glide path: comparison with manual preflaring in simulated root canals.

Authors:  Elio Berutti; Giuseppe Cantatore; Arnaldo Castellucci; Giorgio Chiandussi; Francesco Pera; Giuseppe Migliaretti; Damiano Pasqualini
Journal:  J Endod       Date:  2009-03       Impact factor: 4.171

4.  A comparison of apical transportation and length control between EndoSequence and Guidance rotary instruments.

Authors:  Bekir Karabucak; Adam Joseph Gatan; Chinchai Hsiao; Mian Khalid Iqbal
Journal:  J Endod       Date:  2010-01       Impact factor: 4.171

5.  A micro-computed tomographic evaluation of apical root canal preparation using three instrumentation techniques.

Authors:  J Moore; P Fitz-Walter; P Parashos
Journal:  Int Endod J       Date:  2009-12       Impact factor: 5.264

6.  Comparison of nickel-titanium and stainless steel hand-file instrumentation using computed tomography.

Authors:  J M Gambill; M Alder; C E del Rio
Journal:  J Endod       Date:  1996-07       Impact factor: 4.171

7.  Cleaning and shaping the root canal.

Authors:  H Schilder
Journal:  Dent Clin North Am       Date:  1974-04

8.  A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-Flex endodontic instruments.

Authors:  C R Glossen; R H Haller; S B Dove; C E del Rio
Journal:  J Endod       Date:  1995-03       Impact factor: 4.171

Review 9.  Prion disease: the implications for dentistry.

Authors:  Amir Azarpazhooh; Edward D Fillery
Journal:  J Endod       Date:  2008-10       Impact factor: 4.171

10.  Comparison of the shaping ability of GT® Series X, Twisted Files and AlphaKite rotary nickel-titanium systems in simulated canals.

Authors:  Raidan Ba-Hattab; Anne-Kathrin Pröhl; Hermann Lang; Dieter Pahncke
Journal:  BMC Oral Health       Date:  2013-12-17       Impact factor: 2.757

View more
  4 in total

1.  Shaping Ability of Single-file Systems with Different Movements: A Micro-computed Tomographic Study.

Authors:  Joedy Santa-Rosa; Manoel Damião de Sousa-Neto; Marco Aurelio Versiani; Giselle Nevares; Felipe Xavier; Kaline Romeiro; Marcely Cassimiro; Graziela Bianchi Leoni; Rebeca Ferraz de Menezes; Diana Albuquerque
Journal:  Iran Endod J       Date:  2016-05-01

2.  Comparative analysis of canal-centering ratio, apical transportation, and remaining dentin thickness between single-file systems, i.e., OneShape and WaveOne reciprocation: An in vitro study.

Authors:  Aditi Jain; Asmita Singh Gupta; Rupika Agrawal
Journal:  J Conserv Dent       Date:  2018 Nov-Dec

3.  Shaping ability of four root canal instrumentation systems in simulated 3D-printed root canal models.

Authors:  David Christofzik; Andreas Bartols; Mahmoud Khaled Faheem; Doreen Schroeter; Birte Groessner-Schreiber; Christof E Doerfer
Journal:  PLoS One       Date:  2018-08-01       Impact factor: 3.240

4.  Comparison of Shaping Ability of Different Single-File Systems Using Microcomputed Tomography.

Authors:  Mohamed Mohamed Elashiry; Shehab Eldin Saber; Salma Hasan Elashry
Journal:  Eur J Dent       Date:  2020-01-31
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.