Volatile sulphur compound measurement with OralChroma(TM): a methodological improvement.

The instrumental measurement of volatile sulphur compounds is a common practice to assess halitosis. One of the most widespread devices for that purpose is OralChroma(TM), a combination of a semiconductor gas sensor and a compact gas chromatograph (GC) system. Several lines of evidence indicate that although the hardware of OralChroma(TM) is fit for the precise measurement of volatile sulphur compounds (VSCs), its software needs revision to allow that precision. In this study we sought to develop software to solve this problem, and to test the utility of the new software in a population of patients and controls. The results were also compared with VSC measurements performed with Halimeter(®), another widespread device, so as to assess the correlation. A set of measurements involving volunteers (21 controls and 14 oral cancer patients) were conducted. The analysis of the chromatograms recorded by OralChroma(TM) indicated that the majority of the studied breath samples contained significant amounts of isoprene (the peak was around 100 s) and acetaldehyde (the peak was around 350 s), therefore OralChroma(TM) was also calibrated for both isoprene and acetaldehyde. A linear relationship was found between the concentration (in the range of 80-1400 ppbv for acetaldehyde and 40-560 ppbv for isoprene) and the area under the corresponding peak. In numerous cases the concentrations of VSCs calculated by the software of OralChroma(TM) required revision. In the new software, the concentrations of the VSCs, isoprene and acetaldehyde were determined by fitting the chromatograms with the sum of six Gaussian functions. Based on the findings of the present study we conclude that our new software allows an improved and instantaneous evaluation of OralChroma(TM) chromatograms with the additional possibility of determining the isoprene and acetaldehyde concentrations from breath samples.