Literature DB >> 25541041

Element composition and mineralogical characterisation of air pollution control residue from UK energy-from-waste facilities.

Anna Bogush1, Julia A Stegemann2, Ian Wood3, Amitava Roy4.   

Abstract

Air pollution control (APC) residues from energy-from-waste (EfW) are alkaline (corrosive) and contain high concentrations of metals, such as zinc and lead, and soluble salts, such as chlorides and sulphates. The EPA 3050B-extractable concentrations of 66 elements, including critical elements of strategic importance for advanced electronics and energy technologies, were determined in eight APC residues from six UK EfW facilities. The concentrations of Ag (6-15 mg/kg) and In (1-13 mg/kg), as well as potential pollutants, especially Zn (0.26-0.73 wt.%), Pb (0.05-0.2 wt.%), As, Cd, Cu, Mo, Sb, Sn and Se were found to be enriched in all APC residues compared to average crustal abundances. Results from a combination of scanning electron microscopy with energy dispersive X-ray spectroscopy and also powder X-ray diffraction, thermal analysis and Fourier transform infrared spectroscopy give an exceptionally full understanding of the mineralogy of these residues, which is discussed in the context of other results in the literature. The present work has shown that the bulk of the crystalline phases present in the investigated APC residues include Ca-based phases, such as CaCl(x)OH(2-x), CaCO3, Ca(OH)2, CaSO4, and CaO, as well as soluble salts, such as NaCl and KCl. Poorly-crystalline aragonite was identified by FTIR. Sulphur appears to have complex redox speciation, presenting as both anhydrite and hannebachite in some UK EfW APC residues. Hazardous elements (Zn and Pb) were widely associated with soluble Ca- and Cl-bearing phases (e.g. CaCl(x)OH(2-x) and sylvite), as well as unburnt organic matter and aluminosilicates. Specific metal-bearing minerals were also detected in some samples: e.g., Pb present as cerussite; Zn in gahnite, zincowoodwardite and copper nickel zinc oxide; Cu in tenorite, copper nickel zinc oxide and fedotovite. Aluminium foil pieces were present and abundantly covered by fine phases, particularly in any cracks, probably in the form of Friedel's salt.
Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Entities:  

Keywords:  Air pollution control residue (APC); Energy from waste; Waste characterisation; Waste to energy (WtE)

Mesh:

Substances:

Year:  2014        PMID: 25541041     DOI: 10.1016/j.wasman.2014.11.017

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  3 in total

1.  Investigation of controlling factors on toxic metal leaching behavior in municipal solid wastes incineration fly ash.

Authors:  Lizhi Tong; Yi Tang; Feng Wang; Bin Hu; Pixing Shi; Qing Hu
Journal:  Environ Sci Pollut Res Int       Date:  2019-08-08       Impact factor: 4.223

Review 2.  Characteristics of incineration ash for sustainable treatment and reutilization.

Authors:  Zhenghui Phua; Apostolos Giannis; Zhi-Li Dong; Grzegorz Lisak; Wun Jern Ng
Journal:  Environ Sci Pollut Res Int       Date:  2019-05-01       Impact factor: 4.223

3.  Characteristics of the cement-solidified municipal solid waste incineration fly ash.

Authors:  Jiantao Li; Ming Zeng; Wenxin Ji
Journal:  Environ Sci Pollut Res Int       Date:  2018-10-31       Impact factor: 4.223

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.