Literature DB >> 25506666

Fit of CAD/CAM implant frameworks: a comprehensive review.

Jaafar Abduo1.   

Abstract

Computer-aided design and computer-aided manufacturing (CAD/CAM) is a strongly emerging prosthesis fabrication method for implant dentistry. Currently, CAD/CAM allows the construction of implant frameworks from different materials. This review evaluates the literature pertaining to the precision fit of fixed implant frameworks fabricated by CAD/CAM. Following a comprehensive electronic search through PubMed (MEDLINE), 14 relevant articles were identified. The results indicate that the precision fit of CAD/CAM frameworks exceeded the fit of the 1-piece cast frameworks and laser-welded frameworks. A similar fit was observed for CAD/CAM frameworks and bonding of the framework body to prefabricated cylinders. The influence of CAD/CAM materials on the fit of a framework is minimal.

Entities:  

Keywords:  distortion; implant framework fit; misfit; titanium; zirconia

Mesh：

Substances：

Year:  2014        PMID： 25506666     DOI： 10.1563/AAID-JOI-D-12-00117

Source DB:  PubMed          Journal:  J Oral Implantol        ISSN： 0160-6972            Impact factor:   1.779


  15 in total

1.  [Effects of CAD/CAM titanium alloy surface treatment and resin luting on shear bond strength and durability of composite resin].

Authors:  B B Li; P DI
Journal:  Beijing Da Xue Xue Bao Yi Xue Ban       Date:  2019-02-18

2.  Manufacturing Polymer Model of Anatomical Structures with Increased Accuracy Using CAx and AM Systems for Planning Orthopedic Procedures.

Authors:  Paweł Turek; Damian Filip; Łukasz Przeszłowski; Artur Łazorko; Grzegorz Budzik; Sławomir Snela; Mariusz Oleksy; Jarosław Jabłoński; Jarosław Sęp; Katarzyna Bulanda; Sławomir Wolski; Andrzej Paszkiewicz
Journal:  Polymers (Basel)       Date:  2022-05-31       Impact factor: 4.967

3.  Effect of full arch two scanning techniques on the accuracy of overdenture conventional and CAD/CAM Co-Cr bars.

Authors:  Ali Alenezi; Mohammed Yehya; Mohamed Alkhodary
Journal:  Saudi Dent J       Date:  2022-08-28

4.  Four-year outcomes of full-arch fixed dental prostheses using CAD/CAM frameworks: A retrospective review of 15 cases.

Authors:  Ilser Turkyilmaz; Niki-Haj Hariri
Journal:  J Clin Exp Dent       Date:  2018-10-01

5.  Fabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview.

Authors:  Chui Ling Goo; Keson Beng Choon Tan
Journal:  Case Rep Dent       Date:  2017-03-15

6.  Patient Eligibility for Standardized Treatment of the Edentulous Mandible: A Retrospective CBCT-Based Assessment of Mandibular Morphology.

Authors:  Walid Aouini; France Lambert; Luc Vrielinck; Bart Vandenberghe
Journal:  J Clin Med       Date:  2019-05-07       Impact factor: 4.241

7.  Marginal Discrepancy of Single Implant-Supported Metal Copings Fabricated by Various CAD/CAM and Conventional Techniques Using Different Materials.

Authors:  Safoura Ghodsi; Marzieh Alikhasi; Nika Soltani
Journal:  Eur J Dent       Date:  2019-11-26

8.  Fabrication of a customized impression metal jig for an implant-supported overdenture with a milled bar.

Authors:  Yeganeh Memari; Azadeh Tadayonfard; Amir Fayaz; Elaheh Beyabanaki
Journal:  Dent Res J (Isfahan)       Date:  2021-04-06

Review 9.  Trends in computer-aided manufacturing in prosthodontics: a review of the available streams.

Authors:  Jaafar Abduo; Karl Lyons; Mohammed Bennamoun
Journal:  Int J Dent       Date:  2014-04-08

10.  Accuracy of digital and conventional dental implant impressions for fixed partial dentures: A comparative clinical study.

Authors:  Agne Gedrimiene; Rimas Adaskevicius; Vygandas Rutkunas
Journal:  J Adv Prosthodont       Date:  2019-10-30       Impact factor: 1.904
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.