| Literature DB >> 25495146 |
Tellal B Ageep, David Damiens1, Bashir Alsharif, Ayman Ahmed, Elwaleed H O Salih, Fayez T A Ahmed, Abdoulaye Diabaté, Rosemary S Lees, Jeremie R L Gilles, Badria B El Sayed.
Abstract
BACKGROUND: The success of the sterile insect technique (SIT) depends the release of large numbers of sterile males, which are able to compete for mates with the wild male population within the target area. Unfortunately, the processes of colonisation, mass production and irradiation may reduce the competitiveness of sterile males through genetic selection, loss of natural traits and somatic damage. In this context, the capacity of released sterile Anopheles arabiensis males to survive, disperse and participate in swarms at occurring at varying distances from the release site was studied using mark-release-recapture (MRR) techniques.Entities:
Mesh:
Year: 2014 PMID: 25495146 PMCID: PMC4295471 DOI: 10.1186/1475-2875-13-484
Source DB: PubMed Journal: Malar J ISSN: 1475-2875 Impact factor: 2.979
Figure 1The area of the Northern State in which an SIT feasibility pilot study is proposed. In preparation for this pilot study Anopheles arabiensis swarms were surveyed at Merowe West, Hamadab Village, Nuri area and an abandoned and flooded brickworks southwest of Nuri in September 2012. In November 2012, swarms were only found in in Nuri and an MRR study was conducted to investigate participation of sterile males in swarms in the field.
Figure 2Geographical layout of the mark-release-recapture study, conducted to investigate swarm participation in sterile irradiated males in Nuri, Sudan. The letter A indicates the position of a large swarm, and B and C indicate two small swarms. The circles, squares and triangles indicate release points located 50, 100, 200 m from the site of the large swarm, respectively (Google maps).
Figure 3Release-recapture setup for calculation of MDT. Annuli (75, 150, 225 m) are used to calculate MDT. A represents the classical MDT set up. The black circle indicates the release point and white points indicate the recapture points. B, C and D represent the actual release set up in Sudan (see Figure 2) and the representation of the annuli for the modified MDT calculation. B represents the three annuli 75 m from the three release points and the letter A represents the large swarm, considered as one recapture point for each release point. The circles, squares, and triangles indicate release points located 50, 100, 200 m from the large swarm site, respectively.
mosquitoes (male and female) collected from the large swarm in Nuri, in the Merowe region of Sudan, following three consecutive days of release of marked male adults
| Collection | Marked males | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Released on day 1 | Released on day 2 | Released on day 3 | ||||||||
| Total number | 50 m | 100 m | 200 m | 50 m | 100 m | 200 m | 50 m | 100 m | 200 m | |
| Day 1 | - | - | - | - | - | - | - | - | - | - |
| Day 2 | 227 | 7 | 13 | 0 | 17 | 0 | 2 | - | - | - |
| Day 3 | 235 | 15 | 4 | 0 | 1 | 2 | 23 | 16 | 5 | 1 |
| Day 4 | 310 | 14 | 8 | 0 | 33 | 4 | 0 | 26 | 29 | 17 |
| Day 5 | 168 | 7 | 6 | 0 | 16 | 0 | 0 | 16 | 14 | 7 |
Released males were marked with nine different colours of fluorescent dust, such that males released from 50, 100 or 200 m from the location of the largest swarm on each of three consecutive days of release could be distinguished.
Step-by-step calculation of mean distance travelled (MDT) of males
| Annulus | ||||
|---|---|---|---|---|
| 1 | 2 | 3 | ||
| A. Radius inner (km) |
|
|
| |
| B. Radius outer (km) |
|
|
| |
| C. Area (km) |
|
|
| |
| D. Area total |
| |||
| E. Number of trap |
|
|
| |
| F. Total of traps |
| |||
| G. CF = (C/D) × F |
|
|
| |
| H1 |
|
|
| |
| I1. ER1 = (H1/E) × G |
|
|
| |
| H2 |
|
|
| |
| I2. ER2 = (H2/E) × G |
|
|
| |
| H3 |
|
|
| |
| I3. ER3 = (H3/E) × G |
|
|
| |
| J. Sum of ER |
|
|
| |
| K |
| |||
| L. Distance (A + B)/2 |
|
|
| |
| M. |
|
|
| |
| N |
| |||
A: inner and B: outer radii of each annulus are recorded as A and B, C: area of each annulus, D: total area of the annuli, E: number of recapture sites in each annulus, F: the total number of traps, G: correction factor for each annulus, Hn: number of An. arabiensis recaptured in each annulus for the release day n, In: ERn estimated recaptures for the release day n, J: sum of ERn for each annulus, K: annuli sums totalled, L: median distance of each annulus, M: median distance (L) multiplied by its respective J, N: sum of M. MDT is calculated by the formula N/K.
Figure 4Regression lines of recaptures (expressed as log number of released males recaptured + 1) of cohorts of released at two, three and four days of age. The antilog of the slopes of regressions lines gives the daily survival probability.