Optimization of process parameters for the production of spray dried Ber (Ziziphus jujube L.) powder.

The study covers effect of operating variables of spray dryer i.e. inlet temperature (170, 180, 190, 200 and 210 °C,), aspirator blower capacity (40, 50, 60, 70 and 80 %) and feed pump capacity (9, 12, 15, 18, and 21 %) and processing parameters of feed i.e. total soluble solid (TSS) of feed (7.5 %) and encapsulating material, maltodextrin (4, 6, 8, 10, and 12 %), aerosil (1.0 %), citric acid (0.25 %) upon the physical properties (colour, packed density and hygroscopicity) of powder were observed. After complete evaluation and analysis of all the attributes for physical properties i.e. colour, packed density (0.45 g/cc) and hygroscopicity (0.17 g/g dry matter), it was concluded that best quality of Ber powder were obtained at inlet air temperature 190 °C, aspirator blower capacity 60 %, feed pump capacity 15 %, encapsulating material 8 %.