Literature DB >> 25474703

In situ measurement and simulation of nano-magnetite mobility in porous media subject to transient salinity.

Matthew D Becker1, Yonggang Wang, Jeffrey L Paulsen, Yi-Qiao Song, Linda M Abriola, Kurt D Pennell.   

Abstract

Nanotechnologies have been proposed for a variety of environmental applications, including subsurface characterization, enhanced oil recovery, and in situ contaminant remediation. For such applications, quantitative predictive models will be of great utility for system design and implementation. Electrolyte chemistry, which can vary substantially within subsurface pore waters, has been shown to strongly influence nanoparticle aggregation and deposition in porous media. Thus, it is essential that mathematical models be capable of tracking changes in electrolyte chemistry and predicting its influence on nanoparticle mobility. In this work, a modified version of a multi-dimensional multispecies transport simulator (SEAWAT) was employed to model nanoparticle transport under transient electrolyte conditions. The modeling effort was supported by experimental measurements of paramagnetic magnetite (Fe3O4) nanoparticle, coated with polyacrylamide-methylpropane sulfonic acid - lauryl acrylate (nMag-PAMPS), mobility in columns packed with 40-50 mesh Ottawa sand. Column effluent analyses and magnetic resonance imaging (MRI) were used to quantify nanoparticle breakthrough and in situ aqueous phase concentrations, respectively. Experimental observations revealed that introduction of de-ionized water into the brine saturated column (80 g L(-1) NaCl + 20 g L(-1) CaCl2) promoted release and remobilization of deposited nanoparticles along a diagonal front, coincident with the variable density flow field. This behavior was accurately captured by the simulation results, which indicated that a two-site deposition-release model provided the best fit to experimental observations, suggesting that heterogeneous nanoparticle-surface interactions governed nanoparticle attachment. These findings illustrate the importance of accounting for both physical and chemical processes associated with changes in electrolyte chemistry when predicting nanoparticle transport behavior in subsurface formations.

Entities:  

Year:  2015        PMID: 25474703     DOI: 10.1039/c4nr05088f

Source DB:  PubMed          Journal:  Nanoscale        ISSN: 2040-3364            Impact factor:   7.790


  4 in total

1.  Modified MODFLOW-based model for simulating the agglomeration and transport of polymer-modified Fe0 nanoparticles in saturated porous media.

Authors:  Peyman Babakhani; Fritjof Fagerlund; Abolfazl Shamsai; Gregory V Lowry; Tanapon Phenrat
Journal:  Environ Sci Pollut Res Int       Date:  2015-08-25       Impact factor: 4.223

2.  Carboxymethylcellulose Mediates the Transport of Carbon Nanotube-Magnetite Nanohybrid Aggregates in Water-Saturated Porous Media.

Authors:  Dengjun Wang; Chang Min Park; Arvid Masud; Nirupam Aich; Chunming Su
Journal:  Environ Sci Technol       Date:  2017-10-25       Impact factor: 9.028

3.  Transport and Retention of Poly(Acrylic Acid-co-Maleic Acid) Coated Magnetite Nanoparticles in Porous Media: Effect of Input Concentration, Ionic Strength and Grain Size.

Authors:  Rawan Mlih; Yan Liang; Miaoyue Zhang; Etelka Tombácz; Roland Bol; Erwin Klumpp
Journal:  Nanomaterials (Basel)       Date:  2022-05-02       Impact factor: 5.719

4.  Optimising the transport properties and reactivity of microbially-synthesised magnetite for in situ remediation.

Authors:  Nimisha Joshi; Feixue Liu; Mathew Paul Watts; Heather Williams; Victoria S Coker; Doris Schmid; Thilo Hofmann; Jonathan R Lloyd
Journal:  Sci Rep       Date:  2018-03-09       Impact factor: 4.379

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.