Literature DB >> 25464942

Physical and chemical characterization of waste wood derived biochars.

Erin N Yargicoglu1, Bala Yamini Sadasivam2, Krishna R Reddy3, Kurt Spokas4.   

Abstract

Biochar, a solid byproduct generated during waste biomass pyrolysis or gasification in the absence (or near-absence) of oxygen, has recently garnered interest for both agricultural and environmental management purposes owing to its unique physicochemical properties. Favorable properties of biochar include its high surface area and porosity, and ability to adsorb a variety of compounds, including nutrients, organic contaminants, and some gases. Physical and chemical properties of biochars are dictated by the feedstock and production processes (pyrolysis or gasification temperature, conversion technology and pre- and post-treatment processes, if any), which vary widely across commercially produced biochars. In this study, several commercially available biochars derived from waste wood are characterized for physical and chemical properties that can signify their relevant environmental applications. Parameters characterized include: physical properties (particle size distribution, specific gravity, density, porosity, surface area), hydraulic properties (hydraulic conductivity and water holding capacity), and chemical and electrochemical properties (organic matter and organic carbon contents, pH, oxidation-reduction potential and electrical conductivity, zeta potential, carbon, nitrogen and hydrogen (CHN) elemental composition, polycyclic aromatic hydrocarbons (PAHs), heavy metals, and leachable PAHs and heavy metals). A wide range of fixed carbon (0-47.8%), volatile matter (28-74.1%), and ash contents (1.5-65.7%) were observed among tested biochars. A high variability in surface area (0.1-155.1g/m(2)) and PAH and heavy metal contents of the solid phase among commercially available biochars was also observed (0.7-83 mg kg(-1)), underscoring the importance of pre-screening biochars prior to application. Production conditions appear to dictate PAH content--with the highest PAHs observed in biochar produced via fast pyrolysis and lowest among the gasification-produced biochars.
Copyright © 2014 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Biochar; Biomass pyrolysis; Carbon sequestration; Heavy metals; PAHs; Waste wood

Mesh:

Substances:

Year:  2014        PMID: 25464942     DOI: 10.1016/j.wasman.2014.10.029

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  16 in total

Review 1.  Biochar efficiency in pesticides sorption as a function of production variables--a review.

Authors:  Saba Yavari; Amirhossein Malakahmad; Nasiman B Sapari
Journal:  Environ Sci Pollut Res Int       Date:  2015-08-07       Impact factor: 4.223

2.  Pore structure and environmental serves of biochars derived from different feedstocks and pyrolysis conditions.

Authors:  Shenggao Lu; Yutong Zong
Journal:  Environ Sci Pollut Res Int       Date:  2018-08-29       Impact factor: 4.223

3.  Properties of biochars from conventional and alternative feedstocks and their suitability for metal immobilization in industrial soil.

Authors:  Zygmunt Mariusz Gusiatin; Radosław Kurkowski; Szczepan Brym; Dariusz Wiśniewski
Journal:  Environ Sci Pollut Res Int       Date:  2016-08-05       Impact factor: 4.223

4.  Time-lapse effect of ancient plant coal biochar on some soil agrochemical parameters and soil characteristics.

Authors:  Tamás Kocsis; Borbála Biró; Ákos Ulmer; Mónika Szántó; Zsolt Kotroczó
Journal:  Environ Sci Pollut Res Int       Date:  2017-03-15       Impact factor: 4.223

5.  Properties of biochar derived from wood and high-nutrient biomasses with the aim of agronomic and environmental benefits.

Authors:  Rimena R Domingues; Paulo F Trugilho; Carlos A Silva; Isabel Cristina N A de Melo; Leônidas C A Melo; Zuy M Magriotis; Miguel A Sánchez-Monedero
Journal:  PLoS One       Date:  2017-05-11       Impact factor: 3.240

6.  Simultaneous immobilization of heavy metals in soil environment by pulp and paper derived nanoporous biochars.

Authors:  Hoda Arabyarmohammadi; Ahmad Khodadadi Darban; Mahmoud Abdollahy; Bita Ayati
Journal:  J Environ Health Sci Eng       Date:  2018-07-24

7.  Experimental data on the production and characterization of biochars derived from coconut-shell wastes obtained from the Colombian Pacific Coast at low temperature pyrolysis.

Authors:  Deyler Castilla-Caballero; Juan Barraza-Burgos; Sundaram Gunasekaran; Aicardo Roa-Espinosa; José Colina-Márquez; Fiderman Machuca-Martínez; Aracely Hernández-Ramírez; Sofía Vázquez-Rodríguez
Journal:  Data Brief       Date:  2019-11-22

8.  Generation, Resuspension, and Transport of Particulate Matter From Biochar-Amended Soils: A Potential Health Risk.

Authors:  Sujith Ravi; Junran Li; Zhongju Meng; Jianguo Zhang; Sanjay Mohanty
Journal:  Geohealth       Date:  2020-11-01

9.  Combined Effect of Activated Carbon Particles and Non-Adsorptive Spherical Beads as Fluidized Media on Fouling, Organic Removal and Microbial Communities in Anaerobic Membrane Bioreactor.

Authors:  Daeeun Kwon; Theo Y C Lam; Minseok Kim; Giin-Yu Amy Tan; Po-Heng Lee; Jeonghwan Kim
Journal:  Membranes (Basel)       Date:  2021-05-18

10.  Gasification reactor engineering approach to understanding the formation of biochar properties.

Authors:  Andrew N Rollinson
Journal:  Proc Math Phys Eng Sci       Date:  2016-08       Impact factor: 2.704

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.