Literature DB >> 25378257

Construction technique of disposable bin from sludge cake and its environmental risk.

Udomsak Kongmuang1, Duangta Kiykaew, Ikuharu Morioka.   

Abstract

OBJECTIVES: Now, a lot of researchers have tried to make recycled rigid materials from the sludge cake produced in paper mill industries for the purpose of decreasing its volume. In this study, the researchers tried to make economically a disposable bin and to examine whether it is toxic or not to the outside environment.
METHODS: To make a disposable bin, the researchers used the sludge cake, a plastic basket, as a fixed mold, white cloth or newspaper, as a removable supporter for wrapping around the mold, and latex or plaster, as a binder. The strength of the samples was measured by tensile-stress testing. The water absorption was evaluated by Cobb test. As toxicological tests, leaching test and seed germination test were selected.
RESULTS: It was possible to form the disposal bin from the cleaned sludge cake. They seemed safe to carry garbage in the industry judging from the results of tensile-stress testing. Some of them showed less water absorptiveness (higher water resistance) in the results of Cobb test. The results of leaching test showed small values of three heavy metals, lead, nickel and copper, in the leachate. The seed germination test suggested no adverse effects of the bins in the clay and sand on the tomato growth.
CONCLUSIONS: The results of these tests suggest that the bins have good strength, sufficient water resistance and no toxicological effect on the environment. This new recycled bin has the possibility to solve the environmental and health problems at disposing the sludge cake.

Entities:  

Mesh:

Substances:

Year:  2014        PMID: 25378257      PMCID: PMC4284245          DOI: 10.1007/s12199-014-0420-8

Source DB:  PubMed          Journal:  Environ Health Prev Med        ISSN: 1342-078X            Impact factor:   3.674


  7 in total

Review 1.  The treatment of pulp and paper mill effluent: a review.

Authors:  G Thompson; J Swain; M Kay; C F Forster
Journal:  Bioresour Technol       Date:  2001-05       Impact factor: 9.642

2.  Utilization of sludge in building material.

Authors:  N Okuno; Y Ishikawa; A Shimizu; M Yoshida
Journal:  Water Sci Technol       Date:  2004       Impact factor: 1.915

Review 3.  Treatment of pulp and paper mill wastewater--a review.

Authors:  D Pokhrel; T Viraraghavan
Journal:  Sci Total Environ       Date:  2004-10-15       Impact factor: 7.963

Review 4.  Lead in the Japanese living environment.

Authors:  Jun Yoshinaga
Journal:  Environ Health Prev Med       Date:  2012-04-19       Impact factor: 3.674

5.  Combustion characteristics of paper mill sludge in a lab-scale combustor with internally cycloned circulating fluidized bed.

Authors:  D Shin; S Jang; J Hwang
Journal:  Waste Manag       Date:  2005       Impact factor: 7.145

6.  Risk assessment of heavy metals and their source distribution in waters of a contaminated industrial site.

Authors:  A Keshav Krishna; K Rama Mohan
Journal:  Environ Sci Pollut Res Int       Date:  2013-11-26       Impact factor: 4.223

7.  Properties of poly(lactide)-coated paperboard for the use of 1-way paper cup.

Authors:  J-W Rhim; J-H Kim
Journal:  J Food Sci       Date:  2009-03       Impact factor: 3.167

  7 in total
  1 in total

1.  Potential use of sludge cake from paper mill wastewater treatment as degradable flower pot.

Authors:  Udomsak Kongmuang; Hathaitip Sritanaudomchai; Ikuharu Morioka
Journal:  Environ Health Prev Med       Date:  2016-03-10       Impact factor: 3.674

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.