Structure and properties of polybenzimidazole/silica nanocomposite electrolyte membrane: influence of organic/inorganic interface.

Although increased number of reports in recent years on proton exchange membrane (PEM) developed from nanocomposites of polybenzimidazole (PBI) with inorganic fillers brought hope to end the saga of contradiction between proton conductivity and variety of stabilities, such as mechanical, thermal,chemical, etc.; it still remains a prime challenge to develop a highly conducting PEM with superior aforementioned stabilities. In fact the very limited understanding of the interactions especially interfacial interaction between PBI and inorganic filler leads to confusion over the choice of inorganic filler type and their surface functionalities. Taking clue from our earlier study based on poly(4,4'-diphenylether-5,5'-bibenzimidazole) (OPBI)/silica nanocomposites, where silica nanoparticles modified with short chain amine showed interfacial interaction-dependent properties, in this work we explored the possibility of enhanced interfacial interaction and control over the interface by optimizing the chemistry of the silica surface. We functionalized the surface of silica nanoparticles with a longer aliphatic chain having multiple amine groups (named as long chain amine modified silica and abbreviated as LAMS). FTIR and (13)C solid-state NMR provided proof of hydrogen bonding interactions between the amine groups of modifier and those of OPBI. LAMS nanoparticles yielded a more distinguished self-assembly extending all over the OPBI matrix with increasing concentrations. The crystalline nature of these self-assembled clusters was probed by wide-angle X-ray diffraction (WAXD) studies and the morphological features were captured by transmission electron microscope (TEM). We demonstrated the changes in storage modulus and glass transition temperature (Tg) of the membranes, the fundamental parameters that are more sensitive to interfacial structure using temperature dependent dynamic mechanical analysis (DMA). All the nanocomposite membranes displayed enhanced mechanical, thermal and chemical stability than neat OPBI. The lower water uptake and swelling ratio and volume in both acid and water reflected the more hydrophobic characteristic of the nanocomposites. All the nanocomposite membranes showed phosphoric acid (PA) values to be higher than OPBI but the levels showed decreasing trend with increasing silica content; the reason attributed to the interparticle interaction. The self-assembled clusters of LAMS nanoparticles in the matrix created more sites for proton hopping as a result of which the proton conductivity of all the nanocomposites displayed an increasing trend.