Literature DB >> 25336845

Preliminary physicochemical evaluation of Kushta tutia: A Unani Formulation.

Mohd Tariq1, Shahid Shah Chaudhary1, Shaikh Imtiyaz1, Khaleequr Rahman1, Roohi Zaman1.   

Abstract

BACKGROUND: Kushta is an important solid dosage form of Unani system of medicine used to treat various ailments. Very small particle size of kushta is responsible for its rapid absorption in body leading to instant therapeutic actions. Kushta tutia (KT) is one such renowned formulation used by hakims for successful management of various disorders. However, there is lack of scientific work on KT.
OBJECTIVES: The present study was performed to evaluate KT physicochemically by testifying it on classical tests along with modern scientific techniques.
MATERIALS AND METHODS: Tutia was first detoxified as per classical literature. It was triturated with water and dried, afterwards subjected to calcination in furnace rather than cow dung cakes due to isolation of material being heated and better temperature control. Finished product was evaluated for physicochemical characteristics including preliminary tests mentioned in classical literature.
RESULTS: Floating and finger test were positive. Curd test showed no discoloration after 48 h. These findings indicate correct preparation of KT according to classical literature. Bulk density (0.96 ± 0.00 g/ml); tapped density (1.53 ± 0.00 g/ml); Hausner ratio (0.62 ± 0.00), compressibility index (37.52 ± 0.19%); loss of weight on drying (0.08 ± 0.00%); pH of 1 and 10% (5.20 ± 0.00) and 5.62 ± 0.00, respectively); total ash, acid insoluble ash, and water soluble ash values 95.75 ± 0.09, 6.57 ± 0.02, and 45.02 ± 0.20%, respectively; and extractive values 0.85 ± 0.02% were reported in KT.
CONCLUSION: Since this work has not been reported earlier, the results obtained could be considered as the standard for KT for future studies.

Entities:  

Keywords:  Kushta; Unani; standardization; tutia

Year:  2014        PMID: 25336845      PMCID: PMC4204284          DOI: 10.4103/0975-9476.140470

Source DB:  PubMed          Journal:  J Ayurveda Integr Med        ISSN: 0975-9476


  4 in total

1.  Physicochemical characterization of Ayurvedic bhasma (Swarna makshika bhasma): An approach to standardization.

Authors:  Sudhaldev Mohaptra; C B Jha
Journal:  Int J Ayurveda Res       Date:  2010-04

2.  Standardization of Gaja Puta and Ardha Gaja Puta in the preparation of Vanga Bhasma.

Authors:  Darshan K Parmar; B J Patgiri; P K Prajapati
Journal:  Ayu       Date:  2010-10

3.  Standard manufacturing procedure of Rajata Bhasma.

Authors:  Rekha Chaturvedi; C B Jha
Journal:  Ayu       Date:  2011-10

4.  Quality control parameters for Tamra (copper) Bhasma.

Authors:  Chandrashekhar Yuvaraj Jagtap; Pradeepkumar Prajapati; Biswajyoti Patgiri; Vinay J Shukla
Journal:  Anc Sci Life       Date:  2012-04
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.