Literature DB >> 25285334

3D printed metal columns for capillary liquid chromatography.

S Sandron1, B Heery, V Gupta, D A Collins, E P Nesterenko, P N Nesterenko, M Talebi, S Beirne, F Thompson, G G Wallace, D Brabazon, F Regan, B Paull.   

Abstract

Coiled planar capillary chromatography columns (0.9 mm I.D. × 60 cm L) were 3D printed in stainless steel (316L), and titanium (Ti-6Al-4V) alloys (external dimensions of ~5 × 30 × 58 mm), and either slurry packed with various sized reversed-phase octadecylsilica particles, or filled with an in situ prepared methacrylate based monolith. Coiled printed columns were coupled directly with 30 × 30 mm Peltier thermoelectric direct contact heater/cooler modules. Preliminary results show the potential of using such 3D printed columns in future portable chromatographic devices.

Entities:  

Year:  2014        PMID： 25285334     DOI： 10.1039/c4an01476f

Source DB:  PubMed          Journal:  Analyst        ISSN： 0003-2654            Impact factor:   4.616


  10 in total

1.  Advances in and prospects of microchip liquid chromatography.

Authors:  James P Grinias; Robert T Kennedy
Journal:  Trends Analyt Chem       Date:  2016 Jul-Aug       Impact factor: 12.296

2.  High Performance, Low Cost Carbon Nanotube Yarn based 3D Printed Electrodes Compatible with a Conventional Screen Printed Electrode System.

Authors:  Cheng Yang; B Jill Venton
Journal:  IEEE Int Symp Med Meas Appl       Date:  2017-07-20

3.  3D printed metal molds for hot embossing plastic microfluidic devices.

Authors:  Tung-Yi Lin; Truong Do; Patrick Kwon; Peter B Lillehoj
Journal:  Lab Chip       Date:  2017-01-17       Impact factor: 6.799

4.  3D-printed, TiO2 NP-incorporated minicolumn coupled with ICP-MS for speciation of inorganic arsenic and selenium in high-salt-content samples.

Authors:  Cheng-Kuan Su; Wei-Cheng Chen
Journal:  Mikrochim Acta       Date:  2018-04-25       Impact factor: 5.833

Review 5.  Low-cost and open-source strategies for chemical separations.

Authors:  Joshua J Davis; Samuel W Foster; James P Grinias
Journal:  J Chromatogr A       Date:  2020-12-24       Impact factor: 4.759

6.  Polystyrene-co-Divinylbenzene PolyHIPE Monoliths in 1.0 mm Column Formats for Liquid Chromatography.

Authors:  Sidratul Choudhury; Laurence Fitzhenry; Blánaid White; Damian Connolly
Journal:  Materials (Basel)       Date:  2016-03-18       Impact factor: 3.623

7.  3D Printing of Metallic Microstructured Mould Using Selective Laser Melting for Injection Moulding of Plastic Microfluidic Devices.

Authors:  Nan Zhang; Jinghang Liu; Honggang Zhang; Nigel J Kent; Dermot Diamond; Michael D Gilchrist
Journal:  Micromachines (Basel)       Date:  2019-09-10       Impact factor: 2.891

8.  In-situ time resolved spectrographic measurement using an additively manufactured metallic micro-fluidic analysis platform.

Authors:  T W Monaghan; M J Harding; S D R Christie; R J Friel
Journal:  PLoS One       Date:  2019-11-25       Impact factor: 3.240

9.  Enhanced physicochemical properties of polydimethylsiloxane based microfluidic devices and thin films by incorporating synthetic micro-diamond.

Authors:  Sidra Waheed; Joan M Cabot; Niall P Macdonald; Umme Kalsoom; Syamak Farajikhah; Peter C Innis; Pavel N Nesterenko; Trevor W Lewis; Michael C Breadmore; Brett Paull
Journal:  Sci Rep       Date:  2017-11-08       Impact factor: 4.379

10.  Complementary catalysis and analysis within solid state additively manufactured metal micro flow reactors.

Authors:  T Monaghan; M J Harding; S D R Christie; R A Harris; R J Friel
Journal:  Sci Rep       Date:  2022-03-24       Impact factor: 4.379
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.