Bone-conduction hearing and seismic sensitivity of the Late Permian anomodont Kawingasaurus fossilis.

An investigation of the internal cranial anatomy of the anomodont Kawingasaurus from the Upper Permian Usili Formation in Tanzania by means of neutron tomography revealed an unusual inner and middle ear anatomy such as extraordinarily inflated vestibules, lateroventrally orientated stapes with large footplates, and a small angle between the planes of the anterior and lateral semicircular canals. The vestibule has a volume, which is about 25 times larger than the human vestibule, although Kawingasaurus has only a skull length of approximately 40 mm. Vestibule inflation and enlarged stapes footplates are thought to be functionally correlated with bone-conduction hearing; both morphologies have been observed in fossorial vertebrates using seismic signals for communication. The firmly fused triangular head with spatulate snout was probably used for digging and preadapted to seismic signal detection. The quadrate-quadratojugal complex was able to transmit sound from the articular to the stapes by small vibrations of the quadrate process, which formed a ball and socket joint with the squamosal. Mechanical considerations suggest that the ventrolaterally orientated stapes of Kawingasaurus was mechanically better suited to transmit seismic sound from the ground to the fenestra vestibuli than a horizontal orientated stapes. The low sound pressure level transformer ratio of 2-3 in Kawingasaurus points to a seismic sensitivity of the middle ear and a vestigial or reduced sensitivity to airborne sound. Three hypothetical pathways of bone conduction in Kawingasaurus are discussed: 1) sound transmission via the spatulate snout and skull roof to the otic capsules, 2) relative movements resulting from the inertia of the mandible if sound is percepted with the skull, and 3) bone conduction from the substrate via mandible, jaw articulation, and stapes to the inner ear.