A C Moore1, D L Burris2. 1. Biomedical Engineering, University of Delaware, Newark, DE, United States. 2. Biomedical Engineering, University of Delaware, Newark, DE, United States; Mechanical Engineering, University of Delaware, Newark, DE, United States. Electronic address: dlburris@udel.edu.
Abstract
OBJECTIVE: Prior studies suggest that ligament and meniscus tears cause osteoarthritis (OA) when changes in joint kinematics bring underused and underprepared regions of cartilage into contact. This study aims to test the hypothesis that material and tribological properties vary throughout the joint according to the local mechanical environment. METHOD: The local tribological and material properties of bovine stifle cartilage (N = 10 joints with 20 samples per joint) were characterized under physiologically consistent contact stress and fluid pressure conditions. RESULTS: Overall, cartilage from the bovine stifle had an equilibrium contact modulus of Ec0 = 0.62 ± 0.10 MPa, a tensile modulus of Et = 4.3 ± 0.7 MPa, and a permeability of k = 2.8 ± 0.9 × 10(-3) mm(4)/Ns. During sliding, the cartilage had an effective friction coefficient of μeff = 0.024 ± 0.004, an effective contact modulus of Ec = 3.9 ± 0.7 MPa and a fluid load fraction of F' = 0.81 ± 0.03. Tibial cartilage exhibited significantly poorer material and tribological properties than femoral cartilage. Statistically significant differences were also detected across the femoral condyle and tibial plateau. The central femoral condyle exhibited the most favorable properties while the uncovered tibial plateau exhibited the least favorable properties. CONCLUSIONS: Our findings support a previous hypothesis that altered loading patterns can cause OA by overloading underprepared regions. They also help explain why damage to the tibial plateau often precedes damage to the mating femoral condyle following joint injury in animal models. Because the variations are driven by fundamental biological processes, we anticipate similar variations in the human knee, which could explain the OA risk associated with ligament and meniscus tears.
OBJECTIVE: Prior studies suggest that ligament and meniscus tears cause osteoarthritis (OA) when changes in joint kinematics bring underused and underprepared regions of cartilage into contact. This study aims to test the hypothesis that material and tribological properties vary throughout the joint according to the local mechanical environment. METHOD: The local tribological and material properties of bovine stifle cartilage (N = 10 joints with 20 samples per joint) were characterized under physiologically consistent contact stress and fluid pressure conditions. RESULTS: Overall, cartilage from the bovine stifle had an equilibrium contact modulus of Ec0 = 0.62 ± 0.10 MPa, a tensile modulus of Et = 4.3 ± 0.7 MPa, and a permeability of k = 2.8 ± 0.9 × 10(-3) mm(4)/Ns. During sliding, the cartilage had an effective friction coefficient of μeff = 0.024 ± 0.004, an effective contact modulus of Ec = 3.9 ± 0.7 MPa and a fluid load fraction of F' = 0.81 ± 0.03. Tibial cartilage exhibited significantly poorer material and tribological properties than femoral cartilage. Statistically significant differences were also detected across the femoral condyle and tibial plateau. The central femoral condyle exhibited the most favorable properties while the uncovered tibial plateau exhibited the least favorable properties. CONCLUSIONS: Our findings support a previous hypothesis that altered loading patterns can cause OA by overloading underprepared regions. They also help explain why damage to the tibial plateau often precedes damage to the mating femoral condyle following joint injury in animal models. Because the variations are driven by fundamental biological processes, we anticipate similar variations in the human knee, which could explain the OA risk associated with ligament and meniscus tears.
Authors: Guoan Li; Sang Eun Park; Louis E DeFrate; Matthew E Schutzer; Lunan Ji; Thomas J Gill; Harry E Rubash Journal: Clin Biomech (Bristol, Avon) Date: 2005-08 Impact factor: 2.063
Authors: Ines M Basalo; Robert L Mauck; Terri-Ann N Kelly; Steven B Nicoll; Faye H Chen; Clark T Hung; Gerard A Ateshian Journal: J Biomech Eng Date: 2004-12 Impact factor: 2.097
Authors: John F DeLucca; Daniel H Cortes; Nathan T Jacobs; Edward J Vresilovic; Randall L Duncan; Dawn M Elliott Journal: J Biomech Date: 2016-01-14 Impact factor: 2.712
Authors: Nicholas L Cuccia; Suraj Pothineni; Brady Wu; Joshua Méndez Harper; Justin C Burton Journal: Proc Natl Acad Sci U S A Date: 2020-05-12 Impact factor: 11.205