Literature DB >> 25192072

Efficient Nose-to-Lung (N2L) Aerosol Delivery with a Dry Powder Inhaler.

P Worth Longest1,2, Laleh Golshahi1, Srinivas R B Behara1,2, Geng Tian1, Dale R Farkas1, Michael Hindle2.   

Abstract

PURPOSE: Delivering aerosols to the lungs through the nasal route has a number of advantages, but its use has been limited by high depositional loss in the extrathoracic airways. The objective of this study was to evaluate the nose-to-lung (N2L) delivery of excipient enhanced growth (EEG) formulation aerosols generated with a new inline dry powder inhaler (DPI). The device was also adapted to enable aerosol delivery to a patient simultaneously receiving respiratory support from high flow nasal cannula (HFNC) therapy.
METHODS: The inhaler delivered the antibiotic ciprofloxacin, which was formulated as submicrometer combination particles containing a hygroscopic excipient prepared by spray-drying. Nose-to-lung delivery was assessed using in vitro and computational fluid dynamics (CFD) methods in an airway model that continued through the upper tracheobronchial region.
RESULTS: The best performing device contained a 2.3 mm flow control orifice and a 3D rod array with a 3-4-3 rod pattern. Based on in vitro experiments, the emitted dose from the streamlined nasal cannula had a fine particle fraction <5 μm of 95.9% and mass median aerodynamic diameter of 1.4 μm, which was considered ideal for nose-to-lung EEG delivery. With the 2.3-343 device, condensational growth in the airways increased the aerosol size to 2.5-2.7 μm and extrathoracic deposition was <10%. CFD results closely matched the in vitro experiments and predicted that nasal deposition was <2%.
CONCLUSIONS: The developed DPI produced high efficiency aerosolization with significant size increase of the aerosol within the airways that can be used to enable nose-to-lung delivery and aerosol administration during HFNC therapy.

Entities:  

Keywords:  active dry powder inhaler (DPI) system; enhanced condensational growth (ECG); excipient enhanced growth (EEG); high flow nasal cannula (HFNC); noninvasive ventilation (NIV)

Mesh:

Substances:

Year:  2014        PMID: 25192072      PMCID: PMC4559155          DOI: 10.1089/jamp.2014.1158

Source DB:  PubMed          Journal:  J Aerosol Med Pulm Drug Deliv        ISSN: 1941-2711            Impact factor:   2.849


  47 in total

1.  Nasal mucosal temperature after exposure to cold, dry air and hot, humid air.

Authors:  Kristina Liener; Richard Leiacker; Jörg Lindemann; Gerhard Rettinger; Tilman Keck
Journal:  Acta Otolaryngol       Date:  2003-09       Impact factor: 1.494

2.  Characterization of deposition from nasal spray devices using a computational fluid dynamics model of the human nasal passages.

Authors:  Julia S Kimbell; Rebecca A Segal; Bahman Asgharian; Brian A Wong; Jeffry D Schroeter; Jeremy P Southall; Colin J Dickens; Geoff Brace; Frederick J Miller
Journal:  J Aerosol Med       Date:  2007

Review 3.  Research in high flow therapy: mechanisms of action.

Authors:  Kevin Dysart; Thomas L Miller; Marla R Wolfson; Thomas H Shaffer
Journal:  Respir Med       Date:  2009-05-21       Impact factor: 3.415

4.  A preliminary randomized controlled trial to assess effectiveness of nasal high-flow oxygen in intensive care patients.

Authors:  Rachael L Parke; Shay P McGuinness; Michelle L Eccleston
Journal:  Respir Care       Date:  2011-01-21       Impact factor: 2.258

5.  Targeting aerosol deposition to and within the lung airways using excipient enhanced growth.

Authors:  Geng Tian; P Worth Longest; Xiang Li; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2013-01-03       Impact factor: 2.849

6.  The use of condensational growth methods for efficient drug delivery to the lungs during noninvasive ventilation high flow therapy.

Authors:  Laleh Golshahi; Geng Tian; Mandana Azimi; Yoen-Ju Son; Ross Walenga; P Worth Longest; Michael Hindle
Journal:  Pharm Res       Date:  2013-06-26       Impact factor: 4.200

7.  In vitro comparison of heliox and oxygen in aerosol delivery using pediatric high flow nasal cannula.

Authors:  Arzu Ari; Robert Harwood; Meryl Sheard; Patricia Dailey; James B Fink
Journal:  Pediatr Pulmonol       Date:  2011-03-24

8.  Aerosolization characteristics of dry powder inhaler formulations for the excipient enhanced growth (EEG) application: effect of spray drying process conditions on aerosol performance.

Authors:  Yoen-Ju Son; P Worth Longest; Michael Hindle
Journal:  Int J Pharm       Date:  2013-01-10       Impact factor: 5.875

9.  Condensational growth of combination drug-excipient submicrometer particles for targeted high-efficiency pulmonary delivery: evaluation of formulation and delivery device.

Authors:  Michael Hindle; P Worth Longest
Journal:  J Pharm Pharmacol       Date:  2012-02-21       Impact factor: 3.765

Review 10.  Aerosol delivery to ventilated infant and pediatric patients.

Authors:  James B Fink
Journal:  Respir Care       Date:  2004-06       Impact factor: 2.258

View more
  14 in total

1.  Application of an inline dry powder inhaler to deliver high dose pharmaceutical aerosols during low flow nasal cannula therapy.

Authors:  Dale Farkas; Michael Hindle; P Worth Longest
Journal:  Int J Pharm       Date:  2018-05-05       Impact factor: 5.875

2.  Aerosol Drug Delivery During Noninvasive Positive Pressure Ventilation: Effects of Intersubject Variability and Excipient Enhanced Growth.

Authors:  Ross L Walenga; P Worth Longest; Anubhav Kaviratna; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2017-01-11       Impact factor: 2.849

3.  Development of an Inline Dry Powder Inhaler for Oral or Trans-Nasal Aerosol Administration to Children.

Authors:  Dale Farkas; Michael Hindle; Serena Bonasera; Karl Bass; Worth Longest
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2019-08-29       Impact factor: 2.849

4.  Efficient Nose-to-Lung Aerosol Delivery with an Inline DPI Requiring Low Actuation Air Volume.

Authors:  Dale Farkas; Michael Hindle; P Worth Longest
Journal:  Pharm Res       Date:  2018-08-21       Impact factor: 4.200

5.  Development of an infant complete-airway in vitro model for evaluating aerosol deposition.

Authors:  Karl Bass; P Worth Longest
Journal:  Med Eng Phys       Date:  2018-06-22       Impact factor: 2.242

Review 6.  Use of computational fluid dynamics deposition modeling in respiratory drug delivery.

Authors:  P Worth Longest; Karl Bass; Rabijit Dutta; Vijaya Rani; Morgan L Thomas; Ahmad El-Achwah; Michael Hindle
Journal:  Expert Opin Drug Deliv       Date:  2018-12-10       Impact factor: 6.648

7.  Advancement of the Infant Air-Jet Dry Powder Inhaler (DPI): Evaluation of Different Positive-Pressure Air Sources and Flow Rates.

Authors:  Connor Howe; Mohammad A M Momin; Dale R Farkas; Serena Bonasera; Michael Hindle; P Worth Longest
Journal:  Pharm Res       Date:  2021-08-30       Impact factor: 4.580

8.  Development of an Inline Dry Powder Inhaler That Requires Low Air Volume.

Authors:  Dale Farkas; Michael Hindle; P Worth Longest
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2017-12-20       Impact factor: 2.849

9.  High-Efficiency Dry Powder Aerosol Delivery to Children: Review and Application of New Technologies.

Authors:  Karl Bass; Dale Farkas; Amr Hassan; Serena Bonasera; Michael Hindle; P Worth Longest
Journal:  J Aerosol Sci       Date:  2020-10-14       Impact factor: 3.433

10.  The changing shape of vaccination: improving immune responses through geometrical variations of a microdevice for immunization.

Authors:  Michael Lawrence Crichton; David Alexander Muller; Alexandra Christina Isabelle Depelsenaire; Frances Elizabeth Pearson; Jonathan Wei; Jacob Coffey; Jin Zhang; Germain J P Fernando; Mark Anthony Fernance Kendall
Journal:  Sci Rep       Date:  2016-06-02       Impact factor: 4.379

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.