Literature DB >> 25137538

Amperometric determination of cadmium, lead, and mercury metal ions using a novel polymer immobilised horseradish peroxidase biosensor system.

Bongiwe Silwana1, Charlton Van Der Horst, Emmanuel Iwuoha, Vernon Somerset.   

Abstract

This work was undertaken to develop a novel Pt/PANI-co-PDTDA/HRP biosensor system for environmental applications to investigate the inhibition studies by specific heavy metals, to provide data suitable for kinetic studies and further application of the biosensor to environmental samples. The newly constructed biosensor was compared to the data of the well-researched Pt/PANI/HRP biosensor. Optimised experimental conditions, such as the working pH for the biosensor was evaluated. The functionality of the amperometric enzyme sensor system was demonstrated by measuring the oxidation current of hydrogen peroxide followed by the development of an assay for determination of metal concentration in the presence of selected metal ions of Cd(2+), Pb(2+) and Hg(2+). The detection limits were found to be 8 × 10(-4) μg L(-1) for cadmium, 9.38 × 10(-4) μg L(-1) for lead and 7.89 × 10(-4) μg L(-1) for mercury. The World Health Organisation recommended that the maximum safety level of these metals should not exceed 0.005 mg L(-1) of Cd(2+), 0.01 mg L(-1) of Pb(2+) and 0.001 mg L(-1) of Hg(2+.), respectively. The analytical and detection data for the metals investigated were observed to be lower than concentrations recommended by several bodies including World Health Organisation and Environmental Protection Agencies. Therefore the biosensors developed in this study can be used to screen the presence of these metals in water samples because of its low detection limit. The modes of inhibition of horseradish peroxidase by Pb(2+), Cd(2+) and Hg(2+) as analysed using the double reciprocal plots of the Michaelis-Menten equation was found to be reversible and uncompetitive inhibition. Based on the Km(app) and Imax values for both biosensors the results have shown smaller values. These results also proved that the enzyme modified electrode is valuable and can be deployed for the determination or screening of heavy metals.

Entities:  

Keywords:  Amperometric biosensor; HRP; PANI-co-PDTDA conducting polymer; cadmium; lead; mercury; portable potentiostat

Mesh:

Substances:

Year:  2014        PMID: 25137538     DOI: 10.1080/10934529.2014.937169

Source DB:  PubMed          Journal:  J Environ Sci Health A Tox Hazard Subst Environ Eng        ISSN: 1093-4529            Impact factor:   2.269


  5 in total

1.  Amperometric determination of As(III) and Cd(II) using a platinum electrode modified with acetylcholinesterase, ruthenium(II)-tris(bipyridine) and graphene oxide.

Authors:  Manju Bhargavi Gumpu; Murugan Veerapandian; Uma Maheswari Krishnan; John Bosco Balaguru Rayappan
Journal:  Mikrochim Acta       Date:  2018-05-12       Impact factor: 5.833

Review 2.  From Electrochemical Biosensors to Biomimetic Sensors Based on Molecularly Imprinted Polymers in Environmental Determination of Heavy Metals.

Authors:  Cosimino Malitesta; Sabrina Di Masi; Elisabetta Mazzotta
Journal:  Front Chem       Date:  2017-07-06       Impact factor: 5.221

3.  Development of Cellulosic Paper-Based Test Strips for Mercury(II) Determination in Aqueous Solution.

Authors:  Shoujuan Wang; Zhen Xu; Yongyi Fang; Zhongming Liu; Xin Zhao; Guihua Yang; Fangong Kong
Journal:  J Anal Methods Chem       Date:  2018-11-01       Impact factor: 2.193

Review 4.  Recent Developments in the Speciation and Determination of Mercury Using Various Analytical Techniques.

Authors:  Lakshmi Narayana Suvarapu; Sung-Ok Baek
Journal:  J Anal Methods Chem       Date:  2015-07-05       Impact factor: 2.193

Review 5.  Developing Biosensors in Developing Countries: South Africa as a Case Study.

Authors:  Ronen Fogel; Janice Limson
Journal:  Biosensors (Basel)       Date:  2016-02-02
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.