Literature DB >> 25134965

In vitro and in vivo characterization of pentaerythritol triacrylate-co-trimethylolpropane nanocomposite scaffolds as potential bone augments and grafts.

Cong Chen1, Leah Garber, Mollie Smoak, Carmel Fargason, Thomas Scherr, Caleb Blackburn, Sasha Bacchus, Mandi J Lopez, John A Pojman, Fabio Del Piero, Daniel J Hayes.   

Abstract

A thiol-acrylate-based copolymer synthesized via an amine-catalyzed Michael addition was studied in vitro and in vivo to assess its potential as an in situ polymerizing graft or augment in bone defect repair. The blends of hydroxyapatite (HA) with pentaerythritol triacrylate-co-trimethylolpropane (PETA), cast as solids or gas foamed as porous scaffolds, were evaluated in an effort to create a biodegradable osteogenic material for use as a bone-void-filling augment. Osteogenesis experiments were conducted with human adipose-derived mesenchymal stromal cells (hASCs) to determine the ability of the material to serve as an osteoinductive substrate. Poly(ɛ-caprolactone) (PCL) composites PCL:HA (80:20) (wt/wt%) served as the control scaffold, while the experimental scaffolds included PETA:HA (100:0), (85:15), (80:20), and (75:25) composites (wt/wt%). The results indicate that PETA:HA (80:20) foam composites had higher mechanical strength than the corresponding porous PCL:HA (80:20) scaffolds made by thermo-precipitation method, and in the case of foamed composites, increasing HA content directly correlated with increased yield strength. For cytotoxicity and osteogenesis experiments, hASCs cultured for 21 days on PETA:HA scaffolds in stromal medium displayed the greatest number of live cells compared with PCL:HA composites. Moreover, hASCs cultured on foamed PETA:HA (80:20) scaffolds resulted in the greatest mineralization, increased alkaline phosphatase (ALP) expression, and the highest osteocalcin (OCN) expression after 21 days. Overall, the PETA:HA (80:20) and PETA:HA (85:15) scaffolds, with 66.38% and 72.02% porosity, respectively, had higher mechanical strength and cytocompatibility compared with the PCL:HA control. The results of the 6-week in vivo biocompatibility study using a posterior lumbar spinal fusion model demonstrate that PETA:HA can be foamed in vivo without serious adverse effects at the surgical site. Additionally, it was demonstrated that cells migrate into the interconnected pore volume and are found within centers of ossification.

Entities:  

Mesh:

Substances:

Year:  2014        PMID: 25134965      PMCID: PMC4292860          DOI: 10.1089/ten.TEA.2014.0018

Source DB:  PubMed          Journal:  Tissue Eng Part A        ISSN: 1937-3341            Impact factor:   3.845


  31 in total

1.  Toward modeling the bone marrow niche using scaffold-based 3D culture systems.

Authors:  Nunzia Di Maggio; Elia Piccinini; Maike Jaworski; Andreas Trumpp; David J Wendt; Ivan Martin
Journal:  Biomaterials       Date:  2010-10-16       Impact factor: 12.479

Review 2.  Cell colonization in degradable 3D porous matrices.

Authors:  Benjamin J Lawrence; Sundararajan V Madihally
Journal:  Cell Adh Migr       Date:  2008-01-08       Impact factor: 3.405

Review 3.  Is Wnt signalling the final common pathway leading to bone formation?

Authors:  Frances Milat; Kong Wah Ng
Journal:  Mol Cell Endocrinol       Date:  2009-06-12       Impact factor: 4.102

4.  A 3D in vitro bone organ model using human progenitor cells.

Authors:  Adam Papadimitropoulos; Arnaud Scherberich; Sinan Güven; Naseem Theilgaard; Hendrikus J A Crooijmans; Francesco Santini; Klaus Scheffler; Alberta Zallone; Ivan Martin
Journal:  Eur Cell Mater       Date:  2011-05-15       Impact factor: 3.942

5.  Towards an intraoperative engineering of osteogenic and vasculogenic grafts from the stromal vascular fraction of human adipose tissue.

Authors:  A M Müller; A Mehrkens; D J Schäfer; C Jaquiery; S Güven; M Lehmicke; R Martinetti; I Farhadi; M Jakob; A Scherberich; I Martin
Journal:  Eur Cell Mater       Date:  2010-03-03       Impact factor: 3.942

6.  Osteogenesis and trophic factor secretion are influenced by the composition of hydroxyapatite/poly(lactide-co-glycolide) composite scaffolds.

Authors:  Jiawei He; Damian C Genetos; J Kent Leach
Journal:  Tissue Eng Part A       Date:  2010-01       Impact factor: 3.845

Review 7.  Stem cell- and scaffold-based tissue engineering approaches to osteochondral regenerative medicine.

Authors:  Sarah Sundelacruz; David L Kaplan
Journal:  Semin Cell Dev Biol       Date:  2009-08       Impact factor: 7.727

8.  Proliferation and osteogenic differentiation of human bone marrow stromal cells on alginate-gelatine-hydroxyapatite scaffolds with anisotropic pore structure.

Authors:  A Bernhardt; F Despang; A Lode; A Demmler; T Hanke; M Gelinsky
Journal:  J Tissue Eng Regen Med       Date:  2009-01       Impact factor: 3.963

9.  Characterization of the structure and permeability of titanium foams for spinal fusion devices.

Authors:  R Singh; P D Lee; Trevor C Lindley; R J Dashwood; Emilie Ferrie; T Imwinkelried
Journal:  Acta Biomater       Date:  2008-07-01       Impact factor: 8.947

10.  Acceleration of spinal fusion using syngeneic and allogeneic adult adipose derived stem cells in a rat model.

Authors:  Mandi J Lopez; Kevin R McIntosh; Nakia D Spencer; Jade N Borneman; Ronald Horswell; Paul Anderson; Gang Yu; Lorrie Gaschen; Jeffrey M Gimble
Journal:  J Orthop Res       Date:  2009-03       Impact factor: 3.494

View more
  3 in total

1.  In vitro evaluation of thermal frontally polymerized thiol-ene composites as bone augments.

Authors:  Nicholas P Totaro; Zachari D Murphy; Abigail E Burcham; Connor T King; Thomas F Scherr; Christopher O Bounds; Vinod Dasa; John A Pojman; Daniel J Hayes
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2015-06-09       Impact factor: 3.368

2.  Fabrication and characterization of thiol-triacrylate polymer via Michael addition reaction for biomedical applications.

Authors:  Anoosha Forghani; Leah Garber; Cong Chen; Fariborz Tavangarian; Timothy B Tighe; Ram Devireddy; John A Pojman; Daniel Hayes
Journal:  Biomed Mater       Date:  2018-10-25       Impact factor: 3.715

3.  Bone-forming cells with pronounced spread into the third dimension in polymer scaffolds fabricated by two-photon polymerization.

Authors:  J Heitz; C Plamadeala; M Wiesbauer; P Freudenthaler; R Wollhofen; J Jacak; T A Klar; B Magnus; D Köstner; A Weth; W Baumgartner; R Marksteiner
Journal:  J Biomed Mater Res A       Date:  2016-12-05       Impact factor: 4.396

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.